首页 | 本学科首页   官方微博 | 高级检索  
     

包膜控释肥料养分释放率快速测定方法的研究
引用本文:杨越超,张民,马丽,陈剑秋,耿毓清. 包膜控释肥料养分释放率快速测定方法的研究[J]. 植物营养与肥料学报, 2007, 13(4): 730-738. DOI: 10.11674/zwyf.2007.0431
作者姓名:杨越超  张民  马丽  陈剑秋  耿毓清
作者单位:1.山东农业大学资源与环境学院 山东泰安271018
基金项目:引进国际先进农业科技计划(948计划);农业部农业科技跨越计划;国家农业科技成果转化基金;国家科技支持计划
摘    要:包膜控释肥料养分释放率的快速测定是控释肥质量检测和制定评价标准的关键。快速测定方法可以在较短时间内,推测和评价控释肥料的养分释放速率的快慢及释放期的长短。本研究对4种不同包膜控释肥料在25℃温度条件下的静水释放过程进行了测定,并应用100℃快速浸提化学实测法的测定结果与之拟合,找出两者相同养分释放量的时间对应关系方程,并对方程进行了检验和评价;同时,还对100℃温度条件下快速浸提液进行了电导率法(简便方法)的测定。结果表明,4种不同包膜控释肥料的相同养分释放量与时间对应关系方程的拟合度均达到极显著水平;在100℃温度条件下,快速浸提测定法能在较短的时间内准确测定包膜控释肥料的养分释放率,释放期为36~个月的包膜控释肥,在104~8.h就可初步测定出养分释放期;在25℃释放期为6个月的控释肥,100℃快速浸提测定的养分释放期的最大误差为10.d(5.6%);100℃快速浸提电导率法亦可简便快速的测定出包膜控释肥的养分释放率,其对养分释放期为6个月的包膜控释肥料预测值的最大误差为15.d(8.3%)。

关 键 词:包膜控释肥   养分释放速率   快速浸提测定法
文章编号:1008-505X(2007)04-0730-09
收稿时间:2006-05-08
修稿时间:2006-05-082006-09-25

Fast measurement of nutrient release rate of coated controlled-release fertilizers
YANG Yue-chao,ZHANG Min,MA Li,CHEN Jian-qiu,GENG Yu-qing. Fast measurement of nutrient release rate of coated controlled-release fertilizers[J]. Plant Nutrition and Fertilizer Science, 2007, 13(4): 730-738. DOI: 10.11674/zwyf.2007.0431
Authors:YANG Yue-chao  ZHANG Min  MA Li  CHEN Jian-qiu  GENG Yu-qing
Affiliation:1.College of Resources and Environment;Shandong Agricultural University;Taian 271018;China
Abstract:The fast extraction measurement of nutrient release rate of coated controlled-release fertilizer was the key for quality determination and criterion establishment.The nutrient release rate and release longevity could be estimated or evaluated in short period of time by using fast extraction measurement method.The nutrient release longevity of four kinds of coated controlled-release fertilizers was mensurated in water at 25℃,and the results matched the results of the fast extraction and chemical measurement at 100℃.The fitted equations of release time of coated controlled-release fertilizers at the same nutrient release rate were established,validated and evaluated.The fast extracted solution of coated controlled-release fertilizers at 100℃ could be mensurated by using electrical conductivity method(convenient measurement method).The results indicated that the fitted equations of release time of four kinds of coated controlled-release fertilizers at the same nutrient release rate were significantly correlated.The nutrient release rate of coated controlled-release fertilizers could be mensurated accurately in short period of time by the fast extraction measurement at 100℃.By using fast extraction measurement method at 100℃,the release longevity of 36 months of coated controlled-release fertilizers could be estimaed in 1048 hours,and the maximum forecasting error was only 10 days(5.6%) for mensurating 6 months of release longevity at 25℃.The electrical conductivity measurement method at 100℃ could also be used for mensurating the nutrient release rate of coated controlled-release fertilizers.This method was more convenient compared with the chemical measurement at 100℃,and the maximum forecasting error was only 15 days(8.3%) for mensurating the release longevity of 6 months of coated controlled-release fertilizers at 25℃.
Keywords:coated controlled-release fertilizer  nutrient release rate  fast extraction measurement
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《植物营养与肥料学报》浏览原始摘要信息
点击此处可从《植物营养与肥料学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号