| 生产工艺对巨尾桉/聚乙烯膜复合材料质量的影响 |
| |
| 引用本文： | 任从容,李雪菲,韦文榜,等. 生产工艺对巨尾桉/聚乙烯膜复合材料质量的影响[J]. 林业机械与木工设备, 2014, 0(5): 40-42 |
| |
| 作者姓名： | 任从容 李雪菲 韦文榜 等 |
| |
| 作者单位： | 北京林业大学材料科学与技术学院,北京100083 |
| |
| 基金项目： | 北京市自然科学基金项目“竹/塑复合工程材料界面结合机理研究”（2122045）;2012年北京市教育委员会共建项目专项“木质材料高效加工利用技术”;2010年北京市共建项目“木材高效利用关键技术研究”;木材节约代用项目“废弃木材制备E1级木质模压工业托盘技术示范及产业化”（2013-3004） |
| |
| 摘 要： | 采用巨尾桉基材、胶合剂聚乙烯膜制备三层木塑复合材料，分析热压温度、热压时间、热压压力、施胶量这四个因素对复合材料胶合强度的影响。结果表明：在热压温度160℃、热压时间50s/mm、热压压力0.7MPa、施胶量为119g/m2的工艺条件下，巨尾桉/聚乙烯膜复合材料的胶合性能最优，能够达到II类胶合板标准。
|
| 关 键 词： | 巨尾桉 复合材料 生产工艺 |
Effect of Production Process on the Quality of Wood Plastic Composites Made from Eucalyptus and PE Film |
| |
| REN Cong-rong,LI Xue-fei,WEI Wen-bang,ZHANG Shuang-bao. Effect of Production Process on the Quality of Wood Plastic Composites Made from Eucalyptus and PE Film[J]. Forestry Machinery & Woodworking Equipment, 2014, 0(5): 40-42 |
| |
| Authors: | REN Cong-rong LI Xue-fei WEI Wen-bang ZHANG Shuang-bao |
| |
| Affiliation: | (School of Materials Science and Technology, Beijing Forestry University, Beijing 100083, China) |
| |
| Abstract: | Three-layer composites are prepared using eucalyptus and adhesive polyethylene film and the effect of hot pressing temperature, hot pressing time, hot pressing pressure and adhesive amount on the bonding strength of composites is analyzed. The result shows that in the case of 160℃ hot-pressing temperature, 50s/mm hot-pressing time, 0.7MPa hot-pressing pressure and 119g/m2 adhesive application amount, the optimal bonding performance of composites made from eucalyptus and PE film can be obtained, able to meet the Class II plywood standards. |
| |
| Keywords: | eucalyptus composite material production process |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
