| 某小型涡喷发动机燃烧室疲劳仿真分析 |
| |
| 引用本文： | 刘国富,姜年朝,宋军,唐军军,焦志文.某小型涡喷发动机燃烧室疲劳仿真分析[J].农业装备与车辆工程,2013(11):36-39. |
| |
| 作者姓名： | 刘国富 姜年朝 宋军 唐军军 焦志文 |
| |
| 作者单位： | [1]总参六十所,江苏省南京市210016 [2]南京航空航天大学航空宇航学院,江苏省南京市210016 |
| |
| 摘 要： | 基于ANSYS软件建立某小型涡喷发动机燃烧室1／10有限元模型，利用该模型计算了燃烧室在该发动机额定转速下的热应力分布；以发动机“0-工作-0”循环为燃烧室的温度计算条件，综合热疲劳和高温疲劳影响，分别计算了热疲劳循环次数和时效寿命。提出的燃烧室疲劳寿命工程估算方法，不用开展材料疲劳参数的测试试验，节省了费用和时间，可为其它热端疲劳部件的寿命分析提供借鉴。
|
| 关 键 词： | 涡喷发动机 燃烧室 寿命估算 ANSYS |
The Fatigue Simulation Analysis of Combustor for Micro Turbojet Engine |
| |
| Liu Guofu,Jiang Nianzhao,Song Jun,Tang Junjun,Jiao Zhiwen.The Fatigue Simulation Analysis of Combustor for Micro Turbojet Engine[J].Agricultural Equipment & Vehicle Engineering,2013(11):36-39. |
| |
| Authors: | Liu Guofu Jiang Nianzhao Song Jun Tang Junjun Jiao Zhiwen |
| |
| Institution: | 1 (1. The Sixtieth Institute of the Headquarters of the General, Nanjing City, Jiangsu Province 210016, China; 2.College of Aerospace Engineering, Nanjing University of Aerospace ＆ Astronautics, Nanjing City, Jiangsu Province 210016, China) |
| |
| Abstract: | Based on ANSYS software, the one-tenth finite element model of combustor has been built. With this model, the stress distribution of combustion for a micro turbojet engine under the rated speed has been calculated and the inlet and outlet temperature distribution of the combustion has been simulated with the ＂0-working-0＂ work cycle of the engine. Further, the fatigue life of combustion has been estimated which has included the effect of thermal fatigue and high temperature fatigue. This proposed method for life estimation of combustion can save cost, reduce the analysis time and avoid material fatigue testing. And it can provide reference for the fatigue analysis of other hot rotating member too. |
| |
| Keywords: | turbojet engine combustor life estimation ANSYS |
| 本文献已被 维普 等数据库收录！ |
|
