| 水稻秆颗粒冷压成型工艺条件优 |
| |
| 引用本文： | 孙清,白红春,谷士艳,张春梅,高微,易维明. 水稻秆颗粒冷压成型工艺条件优[J]. 农业机械学报, 2009, 40(8): 100-104 |
| |
| 作者姓名： | 孙清 白红春 谷士艳 张春梅 高微 易维明 |
| |
| 作者单位： | 1. 沈阳农业大学工程学院,沈阳,110161
2. 山东理工大学轻工与农业工程学院,淄博,255049 |
| |
| 摘 要： | 以水稻秆颗粒为原料,以碱处理水稻秆颗粒为粘结荆,采用二次正交旋转设计,研究不同的成型压力、粘结剂添加比、含水率、原料粒径对成型燃料松弛密度以及落下强度的影响.利用SPSS 13.0的回归分析方法以及Matlab 7.1的响应面分析法,建立并分析了4个因子对试验指标影响的数学模型.结果表明,所得回归方程显著,拟合情况良好;最佳成型压力为32 MPa,粘结剂的添加比4:1,含水率为10%,原料粒径4mm,在此条件下,成型物的松弛密度达到1.188g/cm3,成型物落下强度达65.417%.
|
| 关 键 词： | 水稻秆 冷压成型 二次正交旋转组合设计 优化 |
of the Technology for Straw Briquette Cold Press Process |
| |
| Sun Qing,Bai Hongchun,Gu Shiyan,Zhang Chunmei,Gao Wei,Yi Weiming. of the Technology for Straw Briquette Cold Press Process[J]. Transactions of the Chinese Society for Agricultural Machinery, 2009, 40(8): 100-104 |
| |
| Authors: | Sun Qing Bai Hongchun Gu Shiyan Zhang Chunmei Gao Wei Yi Weiming |
| |
| Affiliation: | 1.Engineering College;Shenyang Agricultural University;Shenyang 110161;China2.School of Light Industry and Agriculture Engineering;Shandong University of Technology;Zibo 255049;China |
| |
| Abstract: | Taking particles of rice straw as material,using straw treated by alkali as binder,adopting the quadratic orthogonal rotation design,the effects of various pressure,the additive proportion of binder,the moisture content and the grain size of raw materials on the loose density and the dropping intensity of briquette fuels was studied.A mathematical model of experiment with four factors was established and analyzed by regress method in SPSS 13.0 and response method in Matlab 7.1.The results showed that the re... |
| |
| Keywords: | Rice straw Cold press process Quadratic orthogonal rotation design Optimization |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《农业机械学报》浏览原始摘要信息 |
|
点击此处可从《农业机械学报》下载全文 |
|
