首页 | 本学科首页   官方微博 | 高级检索  
     检索      

喷射沉积Al-20Si/SiCp复合材料的热疲劳行为
引用本文:李微,陈鼎,陈振华,范沧,肖廷.喷射沉积Al-20Si/SiCp复合材料的热疲劳行为[J].湖南农业大学学报(自然科学版),2010,37(1).
作者姓名:李微  陈鼎  陈振华  范沧  肖廷
作者单位:湖南大学材料科学与工程学院;田纳西州大学材料科学与工程系;
基金项目:湖南省国际合作重点项目(2007WK2005)
摘    要:采用V型缺口试样对喷射沉积Al-20Si/SiCp复合材料进行了热循环试验,用光学金相显微镜和扫描电镜研究了在热应力作用下的热疲劳裂纹扩展方式和形态.结果表明:热疲劳裂纹优先在V型缺口处萌生;复合材料经一定的热循环次数后随相对密度的提高,裂纹扩展速率下降;在复合材料的三大相——α-Al基体、Si相以及SiC颗粒中,α-Al基体阻碍热疲劳裂纹的扩展,裂纹非连续性扩展;裂纹扩展方式受Si相的尺寸和分布状态控制,裂纹绕过Si颗粒向前扩展以及裂纹穿过Si颗粒向前扩展是裂纹碰到Si颗粒时常出现的两种机制;SiC颗粒与热疲劳裂纹有强烈的交互作用,加强SiC颗粒与基体的界面结合有利于提高热疲劳寿命.

关 键 词:喷射沉积Al-20Si/SiCp复合材料  热疲劳裂纹  相对密度  α-Al基体  Si相  SiC颗粒  

Thermal Fatigue Behavior of Spray Deposited Al-20Si/SiCp Composite
LI Wei,CHEN Ding,CHEN Zhen-hu,FAN Chang,XIAO Ting.Thermal Fatigue Behavior of Spray Deposited Al-20Si/SiCp Composite[J].Journal of Hunan Agricultural University,2010,37(1).
Authors:LI Wei  CHEN Ding  CHEN Zhen-hu  FAN Chang  XIAO Ting
Institution:1.College of Materials Science and Engineering;Hunan Univ;Changsha;Hunan 410082;China;2.Dept of Materials Science and Engineering;Univ of Tennessee;Knoxville;TN 37996;USA
Abstract:Al-20Si/SiCp composite was fabricated by spray deposition.The thermal fatigue behavior of Al-20Si/SiCp composite was investigated in the water-quench method.Optical microscopy(OM) and scanning electron microscopy(SEM) were used to examine the damage mechanisms of thermal fatigue.Almost all the primary fatigue cracks at an elevated temperature initiated at V-notch.After several thermal cycles,the speed rate of crack propagation decreased with the relative density of composite increase.Because-Al matrix could...
Keywords:
点击此处可从《湖南农业大学学报(自然科学版)》浏览原始摘要信息
点击此处可从《湖南农业大学学报(自然科学版)》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号