Simulated crop production under saline high water table conditions

Summary Many irrigated lands in semi-arid regions of the world are underlain with saline high water tables. Water management is critical to maintain crop productivity under these conditions. A multi-seasonal, transient state model was used to simulate cotton and alfalfa production under various irrigation management regimes. The variables included in-season water application of 1.0 or 0.6 potential evapotranspiration (PET), and 18 or 33 cm pre-irrigation amounts for cotton. The water table was initially at a 1.5m depth and a 9 dS/m salinity. A impermeable lower boundary at 2.5 m depth was imposed. Irrigation water salinity was 0.4 dS/m. Climatic conditions typical to the San Joaquin Valley of California were used for PET and precipitation values. The simulations were for no-lateral flow and also lateral flow whereby the water table was raised to its initial level prior to each irrigation event. Uniform application of 1.0 PET provided for relative cotton lint yields and alfalfa yields of 95% or more for at least 4 years. In-season irrigation of cotton with 0.6 PET had higher yields when associated with a 33 cm rather than an 18 cm pre-irrigation. Lateral flow provided for higher cotton lint yields production than the no-lateral flow case for each pre-irrigation treatment. The beneficial effects of lateral flow diminished with time because of the additional salt which accumulated and became detrimental to crop production. Substantial alfalfa yield reductions occurred after the first year when irrigation was set at 0.6 PET regardless of other conditions. Evaporation losses from the soil during the cotton fallow season were higher when the soil water content entering the fallow season were higher.Research was supported by the University of California Salinity/ Drainage Task Force