| 基于Pro/E与ANSYS的挤压膨化锥形螺杆分析 |
| |
| 引用本文： | 邵悦,张祖立,王宏立,白晓虎. 基于Pro/E与ANSYS的挤压膨化锥形螺杆分析[J]. 农机化研究, 2006, 0(2): 141-143 |
| |
| 作者姓名： | 邵悦 张祖立 王宏立 白晓虎 |
| |
| 作者单位： | 沈阳农业大学,工程学院,沈阳,110161 |
| |
| 摘 要： | 锥形螺杆是挤压膨化机的关键部件,由于长期承受高温、高压的作用,其工作条件较恶劣,因此对它的可靠性提出了较高的要求。为此,利用现代设计方法和手段,实现螺杆从Pro/E到ANSYS的无损导入,并在此基础上简要说明ANSYS分析螺杆的整个流程,为进一步进行螺杆的有限元分析、优化研究以及挤压膨化的模拟试验奠定基础。
|
| 关 键 词： | 机械学 挤压膨化锥形螺杆 有限元分析 |
| 文章编号： | 1003-188X（2006）02-0141-03 |
| 收稿时间： | 2005-07-12 |
| 修稿时间： | 2005-07-12 |
The Analysis on Extruding Taper Screw Based on Pro/E and ANSYS |
| |
| SHAO Yue,ZHANG Zu-li,WANG Hong-li,BAI Xiao-hu. The Analysis on Extruding Taper Screw Based on Pro/E and ANSYS[J]. Journal of Agricultural Mechanization Research, 2006, 0(2): 141-143 |
| |
| Authors: | SHAO Yue ZHANG Zu-li WANG Hong-li BAI Xiao-hu |
| |
| Affiliation: | College of Engineering, Shenyang Agricultural University, Shenyang 110161 ,China |
| |
| Abstract: | Taper screw is the pivotal component of extruding. Because it chronically endure high temperature and high pressure, put forward upper request for its reliability. This text using modern design method and means, achieved the guide of screw from Pro/E to ANSYS. Briefly explain the whole flow that ANSYS analyze the screw, thus establish groundwork for further research on the element analysis, optimization research and stimulant experimentation of extruding. |
| |
| Keywords: | Pro/E ANSYS |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
