|
|||||
|
|
| CMC/锯末复合材料热压制备工艺研究 | |
| 引用本文： | 董传强,李国朝,吴传保,余盛禄,陈捷. CMC/锯末复合材料热压制备工艺研究[J]. 安徽农业科学, 2011, 39(16): 9810+9814-9810,9814 |
| 作者姓名： | 董传强 李国朝 吴传保 余盛禄 陈捷 |
| 作者单位： | 1. 九江学院化学化工学院,江西,九江,332005 2. 九江学院化学化工学院,江西,九江,332005;上海大学环境与化工学院,上海,200444 3. 上海大学环境与化工学院,上海,200444 |
| 基金项目： | 江西省科技支撑计划(2010BSA19500) |
| 摘 要： | [目的]探索制备羧甲基纤维素（CMC）/锯末复合材料的工艺条件,以开发新型的可降解复合材料。[方法]以CMC为黏结剂,锯末为主要原料,用热压成型的方法制备了CMC/锯末复合材料;测试了复合材料的硬度、拉伸强度和拉伸弹性模量等力学性能;讨论了黏接剂用量、热压温度和热压时间对复合材料力学性能的影响。[结果]黏接剂CMC含量40%,热压温度120℃,热压时间10 m in时,制备的CMC/锯末复合材料的硬度、拉伸强度最高,拉伸弹性模量也较大。[结论]用热压成型方法可以制备CMC含量为20%~50%的CMC/锯末复合材料;控制黏结剂含量、热压温度、热压时间等工艺参数可获得成型工艺性良好的复合材料。 |
| 关 键 词： | 羧甲基纤维素 锯末 复合材料 热压成型 |
Research on the Preparation of Composite of CMC/Sawdust by Hot Press |
|
| DONG Chuan-qiang et al. Research on the Preparation of Composite of CMC/Sawdust by Hot Press[J]. Journal of Anhui Agricultural Sciences, 2011, 39(16): 9810+9814-9810,9814 | |
| Authors: | DONG Chuan-qiang et al |
| Affiliation: | DONG Chuan-qiang et al(College of Chemistry and Chemical Engineering,Jiujiang University,Jiujiang,Jiangxi 332005) |
| Abstract: | [Objective] New type of the composite of carboxymethylcellulose(CMC)/sawdust was developed through the experiment in the technical condition of its preparation.[Method] The CMC composites were prepared by means of the CMC being taken as adhesive and the sawdust being taken as main raw material through the hot press molding.The hardness,tensile strength and tensile modulus of elasticity of the material were determined and the effect of the amount of adhesive-adding,the temperature and time of hot compression... |
| Keywords: | Carboxymethylcellulose Sawdust Composites Hot press molding |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |