| 基于SolidWorks二次开发实现蛇型管束的参数化建模 |
| |
| 引用本文： | 马婕,柴天亮.基于SolidWorks二次开发实现蛇型管束的参数化建模[J].农产品加工．学刊,2010(2):103-105,110. |
| |
| 作者姓名： | 马婕 柴天亮 |
| |
| 作者单位： | 1. 银川大学机械与汽车丁程学院,宁夏,银川,750105
2. 四川华能康定水电有限责任公司,四川,成都,610041 |
| |
| 摘 要： | 在间接加热式热风炉的参数化设计中,蛇型管束的行数和列数随着设计参数的变化而变化,使得间接加热式热风炉三维参数化建模比较困难。采用面向对象的编程语言VB,以SolidWorks为平台,对蛇型管束进行了三维参数化设计建模,可按照输入的设计参数自动生成蛇型管束的三维实体模型,绘图速度快且精度高,大大提高了设计质量,为其他复杂零件的参数化设计提供了可供参考的经验。
|
| 关 键 词： | 参数化设计 SolidWorks 二次开发 VB 蛇型换热管束 |
Parametrical Model Design of Pipe Bundle on Secondary Development of SolidWorks |
| |
| Ma Jie,Chai Tianliang.Parametrical Model Design of Pipe Bundle on Secondary Development of SolidWorks[J].Nongchanpin Jlagong.Xuekan,2010(2):103-105,110. |
| |
| Authors: | Ma Jie Chai Tianliang |
| |
| Institution: | 1. Department of Mechanical and Automotive Engineering/a>;Yinchuan University/a>;Yinchuan/a>;Ningxia 750105/a>;China/a>;2. Sichuan Huaneng Kangding Hydropower Co./a>;Ltd/a>;Chengdu/a>;Sichuan 610041/a>;China |
| |
| Abstract: | In the parameterized design of the hot wind furnace,the number of rows and columns of pipe bundle were always varied with design parameters,it was difficult to generate 3D parametric model of hot wind furnace. The parametric design of pipe bundle based on SolidWorks using Visual Basic 6.0 the parametric model of the pipe bundle can be automatically generated. 3D model had a character of quick speed and high accuracy,and the designer work could be promoted efficiently, and some useful referenced experience t... |
| |
| Keywords: | parameterized design SolidWorks secondary development VB pipe bundle |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
