Assessing GNSS correction signals for assisted guidance systems in agricultural vehicles

Accuracy levels achieved with differential global positioning system (DGPS) receivers in agricultural operations depend upon the quality of the correction signal. This study has assessed differential signal error from a Dedicated Base Station, OmniSTAR VBS, European Geostationary Navigation Overlay System, European reference frame-IP for internet protocol (EUREF-IP) and radio navigation satellite aided technique (RASANT). These signals were utilized in guidance assisting systems for agricultural applications, such as tillage, harvesting, planting and spraying, in which GPS receivers were used under dynamic conditions. Simulations of agricultural operations on different days and at different time slots and simultaneously recording the tractor′s geo-position from a DGPS receiver and the tractor′s geo-position from a real-time kinematic (RTK) GPS allowed the comparison of the GPS correction signals. The hardware used for tractor guidance was a lightbar (Trimble model EZ-Guide Plus) system. ANOVA statistics showed a significant difference between the accuracy of the correction signals from different sources. GPS correction signal recommendations to farmers depend upon the accuracy required for the specific operation: (a) Yield monitoring and soil sampling (<1 m) are possible with all the GPS correction signals accessed in any time slot. (b) Broadcast seeding, fertilizer and herbicide application (<0.5 m) are possible for 80% of time with OmniSTAR VBS, 40% of time with RASANT and EUREF-IP and 100% of time with a dedicated base station. (c) Transplanting and drill seeding (<0.04 m) are not possible with the accuracy correction provided by any one of the systems used in this study.