| 平面宏动并联机器人动态模拟 |
| |
| 引用本文： | 高名旺,张宪民.平面宏动并联机器人动态模拟[J].农业机械学报,2012,43(8):205-209,214. |
| |
| 作者姓名： | 高名旺 张宪民 |
| |
| 作者单位： | 1. 华南理工大学广东省精密装备与制造技术重点实验室,广州510641;山东理工大学机械工程学院,淄博255012
2. 华南理工大学广东省精密装备与制造技术重点实验室,广州,510641 |
| |
| 基金项目： | 国家杰出青年基金资助项目(50825504)、中央高校基本科研业务费专项资金资助项目（2012ZP0004）、NSFC-广东省自然科学联合基金资助项目(U0934004)、广东省高等学校珠江学者岗位计划资助项目（2010）和广东省重大科技专项项目(2009A080204005) |
| |
| 摘 要： | 针对宏微结合的宏动并联机器人建立了动力学模型,实现基于模型的滑模控制及仿真。首先,根据机构闭式约束等式,分析机构的逆位置和正位置,同时推导了机构的速度和加速度关系式。在此基础上,选择各杆件的关键点,建立各关键点的偏速度和偏角速度,利用Newton-Euler公式分析各杆件的惯性力和惯性力矩,考虑了微动平台对宏动机器人运动的作用,根据虚功原理建立了动力学方程。最后,应用动态补偿策略,设计了滑模控制器。仿真结果表明了方法的有效性。
|
| 关 键 词： | 宏动并联机器人 虚功原理 滑模控制 动力学模型 |
Dynamic Modeling of Planar Macro-driven Parallel Robot |
| |
| Gao Mingwang and Zhang Xianmin.Dynamic Modeling of Planar Macro-driven Parallel Robot[J].Transactions of the Chinese Society of Agricultural Machinery,2012,43(8):205-209,214. |
| |
| Authors: | Gao Mingwang and Zhang Xianmin |
| |
| Institution: | South China University of Technology;Shandong University of Technology;South China University of Technology |
| |
| Abstract: | The dynamic modeling and slide-mode control for a planar macro-micro parallel robot were investigated.Firstly,the inverse position and the forward position were analyzed by vector method.The velocities and accelerations of the mechanism were derived.Then,pivotal points were selected.The partial velocity and angular velocity about these ones were obtained.The inertial force and moment of the links were obtained by Newton-Euler formulation.Furthermore,based on the principle of virtual work,the dynamic formulation of the system with micro-driven table was formulated.Finally,a sliding-mode controller was designed.The result showed that proposed method was effective. |
| |
| Keywords: | Macro-driven parallel robot Principle of virtual work Slide-mode control Dynamic model |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《农业机械学报》浏览原始摘要信息 |
| 点击此处可从《农业机械学报》下载免费的PDF全文 |
|
