| 非木质石膏碎料板研制 |
| |
| 引用本文： | 宋孝金.非木质石膏碎料板研制[J].福建林业科技,1995,22(3):14-18. |
| |
| 作者姓名： | 宋孝金 |
| |
| 作者单位： | 福建省林业科学研究所 |
| |
| 摘 要： | 对采用竹材、芒秆等非木质材为原料制造石膏碎料板的生产工艺进行探讨，并通过试验确定其较佳的工艺参数。采用优化后工艺参数所制得非木质石膏碎料板，其产品主要力学性能ＭＯＲ和ＩＢ分别超过６ＭＰａ和０．３ＭＰａ，Ｔｓ小于３％。
|
| 关 键 词： | 非木质材料，石膏碎料板，芒秆，材膏比，水膏比 |
The Preparation of the Non-Woody Gypsum Particle Board |
| |
| Song Xiaojin.The Preparation of the Non-Woody Gypsum Particle Board[J].Journal of Fujian Forestry Science and Technology,1995,22(3):14-18. |
| |
| Authors: | Song Xiaojin |
| |
| Institution: | Fujian Research
Institute of Forestry |
| |
| Abstract: | The productive technology of manufacturing gypsum particle
board by adopting the non-woodymaterials of bamboo woed,awn stem. etc.as raw materials
was approached and the better technological pa-rameters were determined through the
experiment.The MOR and IB of main mechanical performances of thenon-woody gypsum
particle board products,which were manufactured by adopting the technological parame-ters
after optimization,were over 6MPa and 0.3MPa respectively and the TS was smaller than 3%. |
| |
| Keywords: | Non-woody materials gypsum particle board awn stem material to gypsum ratio water togypsum ratio |
| 本文献已被 CNKI 维普 等数据库收录！ |
