Morphological aspects of polymer fiber mats obtained by air flow rotary-jet spinning |
| |
Authors: | Tudorel Bălău Mîndru Leonard Ignat Iulia Bălău Mîndru Mariana Pinteala |
| |
Institution: | 2. Faculty of Textile Leather and Industrial Management, “Gh. Asachi” Technical University, Iasi, 700050, Romania 1. Centre of Advanced Research in Bionanoconjugates and Biopolymers, “Petru Poni” Institute of Macromolecular Chemistry, Iasi, 700487, Romania
|
| |
Abstract: | Fiber mats were obtained by using a modified rotary-jet spinning system, which allows a forced air flow produced by an air compressor to interfere with the polymer jets. The main focus of current studies rely on the range of morphological and dimensional characteristics of fibers that may be expected when using this new technical setup of a rotary-jet based spinning system. In fact, this work represents a proof of concept study regarding the potential of an air flow modified rotary-jet spinning for obtaining continuous fibers and nonwoven mats. The morphological examinations by scanning electron microscopy were proved the efficiency of this technique on obtaining relative homogeneous fiber mats from different raw compositions of pure and admixed, natural and synthetic polymers with different molecular masses and polydispersity degrees, like gelatin, polyurethane, and poly (vinyl chloride). The feasibility of air flow rotary-jet spinning was also tested for simultaneous independent deposition of mixed fiber mats from solutions of two polymers made in different solvents, and it was found that by carefully selecting the ratio of polymers through spinnerets number, this technique could be successfully used even in difficult solvent conditions otherwise incompatible with traditional spinning techniques. The distribution of fiber diameters was varying between nanometer scales (100–700 nm) in the case of pure polyurethane and micrometer ranges (2–12 µm) for gelatin-polyurethane mixed mats, which are convenient for various applications, from dressings and scaffolding to different filter systems. Besides the already known advantages of rotary-jet versus electrospinning, the air flow allows the control of solvent evaporation, extending the applicative range of this technique. |
| |
Keywords: | |
本文献已被 SpringerLink 等数据库收录! |
|