Soil Covers for Controlling Acid Generation in Mine Tailings: a Laboratory Evaluation of the Physics and Geochemistry

To evaluate the effectiveness of soil covers, column experiments were conducted on tailings protected by a three-layer soil cover and tailings directly exposed in the open laboratory for a period of 760 days. Periodic rain application was performed to simulate field conditions, and at four times during the experiments the pore water was completely flushed out of each column for analysis. Profiles of oxygen, temperature, and volumetric water content were measured throughout the experiment, and the post-testing pore water quality was also characterized. A one-dimensional semi-analytic diffusion model was used to simulate oxygen profiles in the uncovered tailings. Modelling performed using the geochemical code MINTEQ showed that in the laboratory, aluminium concentrations in the tailings pore water were controlled by Al(OH)SO₄, sulphate by gypsum and Al(OH)SO₄and iron by lepidocrocite in the upper half and by ferrihydrite in the lower half. In the field, however, the iron oxyhydroxide minerals formed in the oxidized zone appear to be dissolving. It was found that the cover was effective in preventing significant desaturation of the clay, even over a 150-day drying period. The covered tailings did not oxidize much during the experiments. In the uncovered tailings, oxygen modelling and examination of the geochemistry show that the rate of gross oxidation and the advancement of the oxidation front decreases with time. However, pore water quality is controlled by geochemical processes other than oxidation, as reported in the field.