| 基于ADAMS/View的动力总成悬置系统开发及应用 |
| |
| 引用本文： | 苗贺,谢金法,柳杨.基于ADAMS/View的动力总成悬置系统开发及应用[J].拖拉机与农用运输车,2007,34(3):65-67,70. |
| |
| 作者姓名： | 苗贺 谢金法 柳杨 |
| |
| 作者单位： | 1. 河南科技大学,河南,洛阳,471003
2. 奇瑞汽车有限公司乘用车工程研究院CAE部,安徽,芜湖,241009 |
| |
| 摘 要： | 阐述了汽车动力总成悬置系统主要作用,及虚拟样机技术在悬置系统设计中的应用,应用机械系统动力学分析软件ADAMS中建立了动力总成悬置系统六自由度的模型。以ADAMS/View为二次开发平台,定制一个动力总成悬置系统用户化模块,使用户在不是很熟悉ADAMS操作的情况下也可以完成悬置系统的建模及性能分析,提高了工作效率。
|
| 关 键 词： | 悬置 建模 二次开发 仿真 分析 |
| 文章编号： | 1006-0006（2007）03-0065-03 |
| 修稿时间： | 2007-01-18 |
Powertrain Mounting System Based on ADAMS/View |
| |
| MIAO He,XIE Jin-fa,LIU Yang.Powertrain Mounting System Based on ADAMS/View[J].Tractor & Farm Transporter,2007,34(3):65-67,70. |
| |
| Authors: | MIAO He XIE Jin-fa LIU Yang |
| |
| Institution: | 1. Henan University of Science and Technology,Luoyang 471003, China; 2. Chery Passenger Vehicle Product Development CAE Department, Wuhu 241009, China |
| |
| Abstract: | The thesis describes the most essential function of powertrain mounting system,and the virtual prototyping technology which applied in the mounting system design.A six-degree-of-freedom simulation model of powertrain mounting system was set up by using software ADAMS.Secondary development on ADAMS/View customizes module of powertrain mounting system analysis.Consumer can uses it to set up and analyze model of mounting system,which improve the work efficiency. |
| |
| Keywords: | Mounting Modeling Secondary development Simulation Analysis |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
