| 软木无胶胶合工艺研究 |
| |
| 引用本文： | 武再彦,邱增处,任博文,郑 超. 软木无胶胶合工艺研究[J]. 西北林学院学报, 2013, 28(6): 178-181. DOI: 10.3969/j.issn.1001-7461.2013.06.36 |
| |
| 作者姓名： | 武再彦 邱增处 任博文 郑 超 |
| |
| 作者单位： | 西北农林科技大学 机械与电子工程学院,陕西 杨陵 712100 |
| |
| 摘 要： | 以探索新型环保的无胶软木产品为目的,在现有软木材料性质、结构的研究及木质材料自粘胶合理论基础之上,以热压时间、含水率、热压温度、配坯密度为因素,采用正交试验法进行软木无胶胶合工艺的研究。结果表明:软木材料可在一定条件下自粘合成板,且制成的无胶软木板性能优良。在实验条件下得到的较优软木无胶胶合工艺参数为:热压温度140 ℃,含水率12%,热压时间5 min,配坯密度0.7 g·cm-3。
|
| 关 键 词： | 软木 无胶胶合 热压工艺 |
Processes of Self-bonding Corkboard |
| |
| WU Zai-yan,QIU Zeng-chu,REN Bo-wen,ZHENG Chao. Processes of Self-bonding Corkboard[J]. Journal of Northwest Forestry University, 2013, 28(6): 178-181. DOI: 10.3969/j.issn.1001-7461.2013.06.36 |
| |
| Authors: | WU Zai-yan QIU Zeng-chu REN Bo-wen ZHENG Chao |
| |
| Affiliation: | College of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi 712100, China |
| |
| Abstract: | In order to explorer a new environmental friendly product of self-bonding cork, the process to produce the self-bonding cork board was investigated by the orthogonal test. This research was based on the study of the cork’s properties and the woody material self-bonding theory and four factors were examined such as hot-pressing time, moisture content, hot-pressing temperature, and the green density. According to the explosive experiment and the orthogonal test, we got good performance self-bonding cork boards and the optimum parameters were determined as: hot pressing at 140℃, moisture content of 12%, duration of 5 minutes and green density of 0.7 g·cm-3. |
| |
| Keywords: | cork self-bonding hot-pressing process |
|
| 点击此处可从《西北林学院学报》浏览原始摘要信息 |
|
点击此处可从《西北林学院学报》下载全文 |
|
