Within and between-tree variation in the biometry of wood rays and fibres in cork oak (Quercus suber_L.)

The variability of fibre and ray dimensions was studied at three radial positions (10, 50 and 90% of radius) in 5 cork oaks (Quercus suber L.) approximately 40 years old. Uniseriate ray height and cell number as well as multiseriate ray height and width were measured in tangential sections. Fibre length, width and wall thickness were measured after maceration. The most striking features of cork oak wood were the large multiseriate rays and the frequent homocellular uniseriate rays. On average multiseriate rays were 5.16 mm high and 0.48 mm wide, and uniseriate rays contained 11 cells and were 227 μm high. Neighbour rays presented large dimensional differences but there was no radial variation and there were very small between-tree differences. The radial maintenance of high and wide rays was discussed as a means to improve water shortage in response to water stress. Fibre dimensions increased radially but differed little between trees: on average, 960–1,220 μm length, 18.40–21.49 μm width and 6.66–8.07 μm wall thickness. The ray pattern showed enough variation for visual appreciation while ensuring within and between-tree uniformity. The presence of rays has to be taken into consideration for designing wood drying programs.