Mechanical characterization of clay reinforced polypropylene nanocomposites at high temperature

This paper focuses on the influence of temperature conditions and the clay contents on enhancement of mechanical characterization of polypropylene (PP) nanocomposites. The nanocomposites were prepared using the melt mixing technique in a co-rotating intermeshing twin screw extruder followed by injection moulding. Nanocomposites properties such as impact strength and ultimate tensile strength, yield strength, failure strain, Young’s modulus and toughness are calculated. The addition of clay to PP matrix was showed remarkable enhancement in mechanical properties at the temperature of 25 oC and 120 °C. Nearly 36 % and 160 % increase in the Young’s modulus and about 45 % and 62 % increase in the impact strength were observed at both room temperature (RT) and high temperature (HT), respectively. But, the tensile strength was not affected much. The basal spacing of clay in the composites was measured by X-ray diffraction (XRD). Scanning electron microscopy (SEM) was used to assess the surface morphology of the fractured surfaces and dispersion of the nanoclay.