Polymer distribution in the cell wall of a wood-polyethylenimine composite

Summary A light microscopic (LM) visual technique to determine the polyethylenimine (PEI) distribution in a wood-PEI composite was studied by the adsorption of acid red or the circulation of Cu(II) ion with PEI in the composite. The amount of the adsorbed dye or Cu(II) on the composite increased linearly with an increase in the PEI content of the wood-PEI. The dyed composites were observed with LM under monochromatic light, corresponding to their absorption maxima at 560 nm for acid red and at 640 nm for copper chelate. The microscopic image was photographically recorded and the negative was subjected to densitometric analysis. At a polymer content lower than 4% in the composite, about 70% of total polymer was located in the middle lamella region, leaving only 30% in the secondary wall. With increasing PEI content of the composite, the concentration in the secondary wall increased, and about 80% of the polymer was located in the secondary wall at a PEI content of 27%. There were no noticeable differences between the amount of polymer detected by dyeing with acid red and by chelating with Cu(II). From the results of the line analysis of the intensity of the characteristic X-ray of uranium, the distribution of the PEI in the cell wall agreed closely with that determined by the LM method. It was concluded that the LM visual technique to determine the PEI location in the wood-PEI composite by dyeing with acid red or by chelating with Cu(II) is a simple and reliable method.