| 翻转式犁式挖坑机深松刀的设计与ANSYS分析 |
| |
| 引用本文： | 程梦昊,张云,梁建平. 翻转式犁式挖坑机深松刀的设计与ANSYS分析[J]. 农机化研究, 2016, 0(7): 137-141. DOI: 10.3969/j.issn.1003-188X.2016.07.028 |
| |
| 作者姓名： | 程梦昊 张云 梁建平 |
| |
| 作者单位： | 1. 内蒙古农业大学机电工程学院,呼和浩特,010018;2. 内蒙古林业科学研究院林业研究所,呼和浩特,010018 |
| |
| 基金项目： | 国家农业资金成果转化项目(2013GB2A400067) |
| |
| 摘 要： | 针对翻转式犁式挖坑机深松刀进行了设计及ANSYS分析,首先根据资料确定出深松刀尺寸,建立了Pro/E三维模型,利用ANSYS对其进行了网格划分,最后得出了深松刀尺的应力云图,找到了深松刀易破坏的薄弱环节。结果显示:在设计深松铲时,注意刀柄与刀刃的接口处的位置,只要保证了这个位置的强度,深松刀就能正常工作。
|
| 关 键 词： | 翻转式鱼鳞坑开沟犁 深松刀 ANSYS 应力云图 |
Design and Finite Element Analysis of Tilting and Scale-hole Deep Loosening Knife Digging Machines |
| |
| Cheng Menghao;Zhang Yun;Liang Jianping. Design and Finite Element Analysis of Tilting and Scale-hole Deep Loosening Knife Digging Machines[J]. Journal of Agricultural Mechanization Research, 2016, 0(7): 137-141. DOI: 10.3969/j.issn.1003-188X.2016.07.028 |
| |
| Authors: | Cheng Menghao Zhang Yun Liang Jianping |
| |
| Affiliation: | Cheng Menghao;Zhang Yun;Liang Jianping;College of Machine and Electronics Engineering,Inner Mongolia Agricultural University;Forestry Research Institute of Inner Mongolia Forestry Science Academy; |
| |
| Abstract: | Based on tilting and scale-hole deep loosening earth auger knife has carried on the design and analysis of AN-SYS, first determinng the deep loosening cutter size according to the data, the Pro/E 3 d model was established, using ANSYS on the grid, finally it is concluded that the deep loosening knife ruler of the stress nephogram, find the weak link in deep loosening knife is easy to damage.Results show that when designing deep loosening shovel, paying attention to the position of the handle and the blade outlet, as long as to ensure the strength of the position, deep loosening knife can work normally. |
| |
| Keywords: | tilting and scale-hole furrow plough deep pine knife ANSYS stress nephogram |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
