| 打捆试验台设计与试验 |
| |
| 引用本文： | 张泽璞,段宝成,陶桂香,衣淑娟,刘春香.打捆试验台设计与试验[J].农机化研究,2019(9):152-156. |
| |
| 作者姓名： | 张泽璞 段宝成 陶桂香 衣淑娟 刘春香 |
| |
| 作者单位： | 黑龙江八一农垦大学工程学院;黑龙江工程学院 |
| |
| 基金项目： | "十三五"国家重点研发计划项目(2016YFD0701800);"十二五"国家科技支撑计划项目(2014BAD06);黑龙江省农垦总局攻关项目(HNK125B-06-12A);黑龙江八一农垦大学省博士后资助项目(LBH-Z17183);黑龙江工程学院博士基金项目(2016BJ06) |
| |
| 摘 要： | 对我国打捆机械当前存在的问题进行了分析,总结了打捆部件方面的设计不足与缺陷。为了改善打捆装置的工作性能,设计一套打捆试验台用于验证打捆工作性能,并介绍了试验台的组成及工作原理。采用三因素五水平正交旋转组合试验方法,通过数据处理得到回归方程与对试验指标的主次因素关系,应用Design-Expert软件得到响应曲面,通过分析获得最优工作参数为草捆长度750mm、喂入量2.5kg/s、飞轮转速80r/min时,草捆密度最优值为165.8kg/m3,满足使用要求。
|
| 关 键 词： | 试验台 打捆装置 正交旋转 参数优化 |
Design and Test of Bale Rig |
| |
| Zhang Zepu,Duan Baocheng,Tao Guixiang,Yi Shujuan,Liu Chunxiang.Design and Test of Bale Rig[J].Journal of Agricultural Mechanization Research,2019(9):152-156. |
| |
| Authors: | Zhang Zepu Duan Baocheng Tao Guixiang Yi Shujuan Liu Chunxiang |
| |
| Institution: | (College of Engineering,Heilongjiang Bayi Agricultural University,Daqing 163319,China;Heilongjiang Engineering College,Harbin 150008,China) |
| |
| Abstract: | This paper analyzes the existing problems in the binding machinery in China,summarizes the shortcomings and deficiencies in the design of the bundling parts.In order to improve the working performance of the bundling device,a bundle test bench is designed to verify the performance of the binding work,and the composition and working principle of the test rig are introduced.The experimental study adopts three factors and five horizontal orthogonal rotation combination test method,through data processing,the relationship between the regression equation and the main and secondary factors of the test index is obtained.The response surface is obtained by design-expert software.The optimum working parameters are 750mm,feed 2.5kg/s,flywheel speed 80r/min,and the optimum value of the density of the bales is 165.8 kg/m^3 to meet the requirements of using. |
| |
| Keywords: | test device baling device orthogonal rotation parameter optimization |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
