Genauigkeit von Bodenfeuchtemessungen mit „Time Domain-Reflektometrie” und., Frequency Domain-Sensoren”︁ in heterogenen Waldböden

Precision of soil moisture measurements done with “Time Domain Reflectometry” and “Frequency Domain Probes” in heterogeneous forest soils Using “Time Domain Reflectometry” (TDR) and “Frequency Domain” (FD) technique soil moisture of a homogenized soil- substrate of silty loam was measured in the lab as well as soil moisture of the same silty loam and of two soils with coarser texture and more heterogeneous structure in situ. These measurements were compared with gravimetric soil moisture measurements done at the same measuring sites. Thus the measuring errors caused by soil heterogeneities should be assessed. The standard error of both, the TDR- and the FD- probes amounted to less than 1 Vol%, at the in situ measurements as well as in the homogenized substrate. In the homogenized substrate under relatively dry conditions soil moisture was overestimated to about 2 Vol% by both electronical methods, which is most likely the result of compactions in the contact zone between rods and the soil caused by the insertion of the rods. In the field both electronical methods, however, underestimated the soil moisture up to 14 Vol%. This applied especially to the surface of the mineral soil and under the influence of high stone contents. This deviation is interpreted as an effect of gaps along the rods, caused by the insertion. In loosely packed and stony upper soils we propose therefore to install the rods in homogenized autochtoneous soil material having settled to its natural bulk density instead of inserting them into the natural layered soil.