| 圆弧齿轮排肥器设计与仿真试验 |
| |
| 引用本文： | 顿国强,叶金,夏雯桢,杨永振,于春玲,郭艳玲,纪文义. 圆弧齿轮排肥器设计与仿真试验[J]. 中国农业大学学报, 2019, 24(12): 111-120 |
| |
| 作者姓名： | 顿国强 叶金 夏雯桢 杨永振 于春玲 郭艳玲 纪文义 |
| |
| 作者单位： | 东北林业大学 机电工程学院, 哈尔滨 150040,东北林业大学 工程技术学院, 哈尔滨 150040,东北林业大学 工程技术学院, 哈尔滨 150040,东北林业大学 机电工程学院, 哈尔滨 150040,东北林业大学 机电工程学院, 哈尔滨 150040,东北林业大学 机电工程学院, 哈尔滨 150040,东北农业大学 工程学院, 哈尔滨 150030 |
| |
| 基金项目： | 国家重点研发计划项目（2018YFD0201004）；中央高校基本科研业务费专项（2572017BB10）；中央高校建设世界一流大学（学科）和特色发展引导专项资金暨双一流经费（41113278）；东北林业大学大学生国家级创新训练计划项目资助（201810225056） |
| |
| 摘 要： | 针对外槽轮式排肥器存在排肥流量均匀性较差的问题,设计一种圆弧齿轮排肥器。对排肥轮结构进行理论分析,建立排肥量数学模型,并确定在结构参数不变的情况下,影响排肥器排肥量的工作参数。设计仿真试验,研究工作参数对圆弧齿轮排肥器排肥量的影响、对比圆弧齿轮排肥器与外槽轮式排肥器排肥流量均匀性高低;设计验证试验,检验仿真试验可靠性;结果表明:1)因调肥隔板与排肥轮间存在间隙,导致肥料堆积产生滑移现象,排肥器无法通过改变工作槽段长度对排肥量进行稳定调节,但排肥轮转速可线性改变排肥器排肥量,且排肥轮转速与排肥流量间存在线性关系;2)圆弧齿轮排肥器较外槽轮式排肥器排肥流量变异系数平均减小30.14%,排肥流量均匀性有了较大的提高;3)台架试验值与离散元仿真值相对误差值均小于2.5%,离散元仿真试验结果可靠。
|
| 关 键 词： | 排肥器 圆弧齿轮 离散元法 仿真 排肥流量 |
| 收稿时间： | 2019-03-26 |
Design and simulation test of arc gear fertilizer apparatus |
| |
| DUN Guoqiang,YE Jin,XIA Wenzhen,YANG Yongzhen,YU Chunling,GUO Yanling and JI Wenyi. Design and simulation test of arc gear fertilizer apparatus[J]. Journal of China Agricultural University, 2019, 24(12): 111-120 |
| |
| Authors: | DUN Guoqiang YE Jin XIA Wenzhen YANG Yongzhen YU Chunling GUO Yanling JI Wenyi |
| |
| Affiliation: | College of Mechanical and Electrical Engineering, Northeast Forestry University, Harbin 150040, China,College of Engineering Technology, Northeast Forestry University, Harbin 150040, China,College of Engineering Technology, Northeast Forestry University, Harbin 150040, China,College of Mechanical and Electrical Engineering, Northeast Forestry University, Harbin 150040, China,College of Mechanical and Electrical Engineering, Northeast Forestry University, Harbin 150040, China,College of Mechanical and Electrical Engineering, Northeast Forestry University, Harbin 150040, China and College of Engineering, Northeast Agricultural University, Harbin 150030, China |
| |
| Abstract: | Aiming at the problem of poor uniformity of fertilizer flow in external groove wheel fertilizer apparatus,an arc gear fertilizer apparatus was designed.Based on the theoretical analysis of the structure of the fertilizer wheel,the mathematical model of the fertilizing amount was established,and the working parameters affecting the fertilizing amount of the fertilizer apparatus were determined when the structural parameters remained unchanged.Simulation experiment was designed to study the influence of parameters on fertilizing amount of arc gear fertilizer apparatus,the uniformity of fertilizer flow between arc gear fertilizer apparatus and external groove wheel fertilizer apparatus was compared;and verification test was designed to verify the reliability of simulation experiment.The results show that:1) Because of the gap between fertilizer regulating baffle and fertilizer dispensing wheel,fertilizer accumulation will slip,arc gear fertilizer apparatus didn''t change the fertilizing amount.The length of the trough section regulated the fertilizing amount steadily,but the rotational speed of the wheel changed the fertilizing amount linearly,and there was a linear relationship between the rotational speed of the wheel and the flow rate of the fertilizing amount.2) The coefficient of variation of the flow rate of the arc gear fertilizer discharge device decreased by 30.14% on average compared with that of the external groove wheel fertilizer apparatus,and the uniformity of the fertilizer flow increased considerably.3) The relative error between bench test value and discrete element simulation value was less than 2.5%.The results of discrete element simulation are reliable. |
| |
| Keywords: | fertilizer apparatus arc gear discrete element method simulation fertilizer flow |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《中国农业大学学报》浏览原始摘要信息 |
|
点击此处可从《中国农业大学学报》下载全文 |
|
