Adsorption of Dioxin by Bag Filter + Powdered Activated Carbon

A novel bag filter + powdered activated carbon technique is here proposed to address the low utilization rate of powdered activated carbon and the low dioxin removal rate associated with the conventional activated carbon injection + bag filter technique, better known as the fly ash + activated carbon + bag technique. In this method, dibenzofuran serves as a dioxin simulant. The effect of the adsorption temperature and dibenzofuran inlet concentration on the adsorption performance of activated carbon was studied using a filter cloth adsorption device with an inner diameter of 25 mm, and the adsorption performances of fly ash, activated carbon, and fly ash +5% activated carbon were compared. The results showed that activated carbon exhibited a higher adsorption efficiency and remained highly efficient longer than fly ash +5% activated carbon. When the dibenzofuran inlet concentration was 0.0956 g/m³ (about one million times the concentration of dioxin in the flue gas of incinerated waste), the duration of the high-efficiency (>90%) adsorption of the powdered activated carbon (thickness 1.2 mm) on the filter cloth was over 7 h. These results prove that the replacement of fly ash + activated carbon + filter bag with powdered activated carbon + bag filter can significantly improve the removal efficiency of the dioxin in waste incineration flue gas and the utilization rate of activated carbon.