| 原木等级及径级对规格材质量及出材率的影响 |
| |
| 引用本文： | 周永东,叶克林. 原木等级及径级对规格材质量及出材率的影响[J]. 木材工业, 2010, 24(1) |
| |
| 作者姓名： | 周永东 叶克林 |
| |
| 作者单位： | 中国林科院木材工业研究所,国家林业局木材科学与技术重点实验室,北京,100091 |
| |
| 基金项目： | “十一五”国家科技支撑计划项目(2006BAD18B0701) |
| |
| 摘 要： | 选用不同径级和质量等级的兴安落叶松原木,采用毛板下锯法和四面下锯法加工规格材,并检测分析了不同等级规格材的出材率。结果表明,原木径级在26～28cm时,规格材出材率较高;原木的等级与径级,及下锯法与原木径级交互因素,对规格材的出材率有显著的影响。要提高规格材出材率,应根据规格材尺寸优化匹配各因素。
|
| 关 键 词： | 兴安落叶松 结构用规格材 原木等级 径级 出材率 |
Effects of Log Diameter and Grading on Grade Recovery of Dimension Lumber |
| |
| ZHOU Yong-dong,YE Ke-lin. Effects of Log Diameter and Grading on Grade Recovery of Dimension Lumber[J]. China Wood Industry, 2010, 24(1) |
| |
| Authors: | ZHOU Yong-dong YE Ke-lin |
| |
| Affiliation: | Research Institute of Wood Industry/a>;Chinese Academy of Forestry/a>;Key Lab of Wood Science and Technology of State Forestry Administration/a>;Beijing 100091/a>;China |
| |
| Abstract: | An experimental investigation was conducted in this study to optimize the process of manufacturing dimension lumber with live-sawing and cant-sawing methods. Effects of log diameter and grading on lumber grade recovery were analyzed. The results showed both log grade and diameter,along with sawing methods,significantly affected the quality and grade of the produced dimension lumber. We found that the log grade needed to be No.2 or above and the diameter should be 26~28 cm or higher to assure high lumber gra... |
| |
| Keywords: | larch dimension lumber log grade diameter recovery |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
