首页 | 本学科首页   官方微博 | 高级检索  
     检索      

65Mn表面熔覆硬质合金工艺及其性能
引用本文:翟鹏飞,尉丰婵,王嘉伟.65Mn表面熔覆硬质合金工艺及其性能[J].农业工程,2015,5(6):99-100.
作者姓名:翟鹏飞  尉丰婵  王嘉伟
作者单位:山西农业大学信息学院,太谷030800
摘    要:采用氩弧焊,将Co、WC、TiC混合后的粉末熔覆于65Mn钢,之后进行熔覆层的硬度和耐磨性测试,并用光学显微镜与扫描电镜观察样品的显微组织结构。结果表明,硬质相WC、TiC等分散于粘结相Co中,熔覆后提高了样品的耐磨性与硬度。 

关 键 词:65Mn    熔覆    硬质合金    性能

Process and Property of 65Mn Surface Cladding Cemented Carbide
Zhai Pengfei,Wei Fengchan and Wang Jiawei.Process and Property of 65Mn Surface Cladding Cemented Carbide[J].Agricultural Engineering,2015,5(6):99-100.
Authors:Zhai Pengfei  Wei Fengchan and Wang Jiawei
Abstract:Co,WC and TiC powder were prepared on the surface of 65Mn steel which was commonly used in agricultural machinery parts by means of argon arc cladding technique.Micro-hardness and wear resistance of cladding were tested by micro-hardness instrument and abrasive wear testing machine.Microstructures of cladding were investigated by means of optical microscopy,scanning electron microscopy. Results indicated that the hard phase WC,TiC and others scatter in soft phase Co,it made better resistance to abrasive cutting hard phase,improve the wear resistance and hardness finally. 
Keywords:
本文献已被 CNKI 等数据库收录!
点击此处可从《农业工程》浏览原始摘要信息
点击此处可从《农业工程》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号