基于经济效益的农业新型经营主体小麦玉米全程机械化农机配备研究

因山东省旱作灌溉区种植模式多样、技术模式不统一，规模化生产下的机械效能未能充分发挥，存在动力机械与机具配套比低、农机动力与资金浪费问题，在对小麦玉米周年轮作下全程机械化技术模式调研后，总结小麦玉米全程机械化技术路线，构建以作业成本最小为目标的农机装备优化配备模型。通过对平度市某小麦玉米种植合作社进行计算，作业成本较实际情况下降10.9%；总动力优化配备结果为23.712 kW，下降51.36%；农机配套比提高50%。研究结果可为山东省旱作灌溉区小麦玉米全程机械化技术模式优选、农机农艺深度融合、农业合作社的农机配备等方面提供技术参考。     

土壤团聚体有机碳研究进展

土壤有机碳是衡量土壤肥力的重要指标,对于促进土壤养分循环、增加养分有效性有重要作用。土壤团聚体是土壤的重要组成部分,是组成土壤结构的最小单元,受到自然因素和人为因素的影响,其形成转化过程与土壤固碳过程息息相关,因而研究团聚体和有机碳的关系及团聚体有机碳影响因素对于土壤结构的改善和土壤质量的提升具有重要意义。本文通过对文献的总结,明晰了土壤团聚体和有机碳的关系,阐述了土壤类型、施肥方式、土地利用和矿区复垦对土壤团聚体有机碳的影响,并从生物质炭的长期定位研究和复垦矿区的土壤修复两方面对土壤团聚体有机碳的研究进行展望,研究结果可为合理的农业生产提供科学依据。     

小麦4B染色体上LOX基因的等位变异及其区域分布

为了解中国不同麦区小麦种质资源籽粒脂肪氧化酶（lipoxygenase,LOX）活性相关基因TaLox-B1的差异和分布,利用小麦4B染色体上的功能标记LOX16和LOX18对7个麦区的436份种质资源进行分子检测。结果表明：在供试材料中共检测到3种TaLox-B1基因等位变异类型,分别为TaLox-B1a（与高LOX活性相关)、TaLox-B1b（与低LOX活性相关）和杂合型,其频率分别为19.0％、70.4％和10.6％。小麦LOX活性基因不同变异类型在各生态区的分布存在明显差异：基因型TaLox-B1a在黄淮冬麦区、北部冬麦区和长江中下游冬麦区分布较多,其比例分别为21.1%、19.8%和17.6%;基因型TaLox-B1b在西南冬麦区和长江中下游冬麦区分布较多,比例分别为87.9%、72.5%;杂合型仅存在于北部冬麦区、黄淮冬麦区与长江中下游冬麦区,比例分别为14.2%、12.4%和9.8%。利用标记LOX16和LOX18对53个自选高代品系进行分子检测,发现自选品系仅有TaLox-B1b与杂合型两种基因型,其中基因型TaLox-B1ab有32个,比例为60.4%。采用分子标记辅助选择,有利于快速鉴定小麦籽粒LOX活性,加速LOX的遗传改良和新品种选育。     

天津春稻和麦茬稻品质特性比较

以天津市培育的优质小站稻品种津川1号和隆优619为供试材料,分析了春稻和麦茬稻品质特性的差异。结果表明,津川1号作麦茬稻的整精米率明显低于作春稻,而垩白粒率显著高于春稻;津川1号麦茬稻的蛋白质含量明显偏高,食味值显著低于春稻;隆优619作春稻和麦茬稻无论在外观、加工、食味还是营养品质方面均无显著差异,是较理想的麦茬连作品种。     

数值模型结构不确定性对模拟结果的影响分析

以内蒙古鄂托克旗为例,基于GMS中的MODFLOW模块构建了地下水流数值模拟模型,分析了模型结构(含水层厚度、参数分区)与模型参数不确定性因素对模拟结果的影响.研究结果表明:含水层不确定情景(含水层下边界概化为隔水底板平均值870 m)与实际情况水头差值绝对值的累计和最大为701 m,对模拟结果起了主控作用;当含水层下边界概化为910,940 m时,累计和分别增加为1 013,1 593 m;与仅考虑单个不确定性因素相比,同时考虑模型参数与含水层不确定情景累计和最大为738 m,同时考虑参数分区与含水层不确定情景累计和最大为791 m.因此,在构建地下水流数值模拟模型时,应优先考虑含水层空间结构概化的合理程度,同时考虑多个不确定性因素对模拟结果的综合影响,使地下水数值模拟模型能更精确地反映真实的地下水流状况.     

Exogenous application of allelopathic water extracts helps improving tolerance against terminal heat and drought stresses in bread wheat (Triticum aestivum L. Em. Thell.)

The allelopathic water extracts (AWEs) may help improve the tolerance of crop plants against abiotic stresses owing to the presence of the secondary metabolites (i.e., allelochemicals). We conducted four independent experiments to evaluate the influence of exogenous application of AWEs (applied through seed priming or foliage spray) in improving the terminal heat and drought tolerance in bread wheat. In all the experiments, two wheat cultivars, viz. Mairaj‐2008 (drought and heat tolerant) and Faisalabad‐2008 (drought and heat sensitive), were raised in pots. Both wheat cultivars were raised under ambient conditions in the wire house till leaf boot stage (booting) by maintaining the pots at 75% water‐holding capacity (WHC). Then, managed drought and heat stresses were imposed by maintaining the pots at 35% WHC, or shifting the pots inside the glass canopies (at 75% WHC), at booting, anthesis and the grain filling stages. Drought stress reduced the grain yield of wheat by 39%–49%. Foliar application of AWEs improved the grain yield of wheat by 26%–31%, while seed priming with AWEs improved the grain yield by 18%–26%, respectively, than drought stress. Terminal heat stress reduced the grain yield of wheat by 38%. Seed priming with AWEs improved the grain yield by 21%–27%; while foliar application of AWEs improved the grain yield by 25%–29% than the heat stress treatment. In conclusion, the exogenous application of AWEs improved the stay green, accumulation of proline, soluble phenolics and glycine betaine, which helped to stabilize the biological membranes and improved the tolerance against terminal drought and heat stresses.     

Determination of critical nitrogen dilution curve based on leaf area index for winter wheat in the Guanzhong Plain,Northwest China

Excessive use of nitrogen(N) fertilizers in agricultural systems increases the cost of production and risk of environmental pollution. Therefore, determination of optimum N requirements for plant growth is necessary. Previous studies mostly established critical N dilution curves based on aboveground dry matter(DM) or leaf dry matter(LDM) and stem dry matter(SDM), to diagnose the N nutrition status of the whole plant. As these methods are time consuming, we investigated the more rapidly determined leaf area index(LAI) method to establish the critical nitrogen(N_c) dilution curve, and the curve was used to diagnose plant N status for winter wheat in Guanzhong Plain in Northwest China. Field experiments were conducted using four N fertilization levels(0, 105, 210 and 315 kg ha-1) applied to six wheat cultivars in the 2013–2014 and 2014–2015 growing seasons. LAI, DM, plant N concentration(PNC) and grain yield were determined. Data points from four cultivars were used for establishing the N_c curve and data points from the remaining two cultivars were used for validating the curve. The N_c dilution curve was validated for N-limiting and non-N-limiting growth conditions and there was good agreement between estimated and observed values. The N nutrition index(NNI) ranged from 0.41 to 1.25 and the accumulated plant N deficit(N_(and)) ranged from 60.38 to –17.92 kg ha~(-1) during the growing season. The relative grain yield was significantly affected by NNI and was adequately described with a parabolic function. The N_c curve based on LAI can be adopted as an alternative and more rapid approach to diagnose plant N status to support N fertilization decisions during the vegetative growth of winter wheat in Guanzhong Plain in Northwest China.     

Detect unique molecular structure associated with physiochemical properties in CDC varieties of oat grain with unique nutrient traits [Feed Type vs. Milling Type] in comparison with barley grain using advanced molecular spectroscopy as a non-destructive biological tool

The objective of this study was to determinate grain unique protein inherent molecular structure that are related physiochemical and nutrient profiles in CDC developed oat varieties [CDC Nasser (Feed Type) and CDC Seabiscuit (Milling Type)] grown in cool climate condition in western Canada in comparison with conventional barley variety of CDC Meredith as a control using advanced molecular spectroscopy. Multivariate analyses, including an agglomerative hierarchical cluster analysis (CLA) and principal component analysis (PCA), were performed to identify protein molecular structural differences among the grains. The results revealed that CDC Seabiscuit contained greater (P < 0.05) protein structural Amide I and II than CDC Nasser and CDC Meredith, while the greater (P < 0.005) structural Amide I to II area and height ratios was detected in CDC Meredith. New oat grains had greater (P < 0.05) β-sheet height than barley grains, however, there was no difference in α-helix to β-sheet ratio values among the varieties. In conclusion, CDC Nasser and CDC Meredith had no difference in protein molecular structural features, while CDC Seabiscuit contains different protein structural characteristics as compared to CDC Meredith grain. The molecular structure features are highly associated with physiochemical and nutrient profiles in grains, which indicate that it also affect nutrient utilization and availability.     

An investigation on the effect of heat-moisture treatment on baking quality of wheat by using response surface methodology

Effect of heat-moisture treatment on quality properties of two bread wheats (cvs. Tosunbey and Bayraktar) were investigated by using response surface methodology (RSM). Temperature and moisture conditions in the experimental design were in the range of 55–95 °C and 13–19%. Heat-moisture treated grains were milled into flour and quality properties were determined. The optimum moisture-temperature combination for the highest dry gluten, Zeleny sedimentation, Alveograph W and bread volume values were estimated as 14%-63 °C for Tosunbey and 19%-55 °C for Bayraktar samples. Alveograph W seems to be a good indicator of baking quality for wheats treated at higher temperatures. In order to describe the relationship between the dependent and independent variables (moisture, temperature), the response values were fitted by second order polynomial models. Significance analysis showed that the effect of both moisture and temperature on dry gluten content, sedimentation and falling number values for Tosunbey; falling number and damaged starch values for Bayraktar were significant (p < 0.05). The effect of temperature on Farinograph water absorption, W and P/G, bread volume and firmness values were significant for both cultivars (p < 0.05). It can be concluded that improvement in baking quality can be achieved and flours with different properties can be produced by heat-moisture treatments on wheat.