工厂化代料栽培花菇技术研究初报

本文主要研究工厂化代料栽培花菇技术，根据花菇成因及香菇菌丝生长、原基分化、花菇形成三个阶段所要求的生态条件不同，分别按三个阶段设计了培养室、催蕾室、催化室，利用设施人工调控工艺条件，进行菌丝培养、催蕾和催花管理，使花菇产量和质量大大提高，小试获得了８０％的花菇率，比室外高棚层架方式提高近１倍。     

How well does a log decay-class system capture the ecology of decomposition? - A case-study from Tasmanian Eucalyptus obliqua forest

The use of decay-class systems in characterising the state of decomposition of a forest’s complement of rotting logs is widespread. While most systems are based on an assessment of logs’ external characteristics, there is an implicit assumption that doing so captures important information on the underlying processes of internal decomposition. However, the validity of this remains largely untested. We explored the relationship between decay-class and internal state of decomposition in logs of Eucalyptus obliqua in the lowland wet eucalypt forests of Southern Tasmania, Australia. We examined rotten-wood samples from a large population of logs across a wide range of diameters. From this we determined that smaller-diameter (<60 cm: regrowth-sized) logs differ from larger-diameter (>60 cm: mature-sized) logs in their pathways of internal decomposition. Decomposition in regrowth-sized logs is characterised by greater activity of surface rots, with white rot-types predominating. Decomposition in mature-sized logs is more concentrated in the interior of the log, with brown rot-types tending to dominate. These differences probably both reflect and help shape the communities of organisms inhabiting logs of different origins. Despite these differences, regrowth and mature-sized logs show the same general progression of internal decomposition across the five decay-classes, to the extent that each class represents logs that have lost a predictable proportion of their original mass. We conclude that a decay-class system that is restricted to a single dimension, such as the five-class system used for E. obliqua, will be quite able to capture the main trajectory of biomass loss, but will not be able to characterise the complexity of the ecological processes giving rise to this loss. Studies that employ single-dimension decay classes, and which aggregate decay-class data across logs, can be given added ecological meaning by first partitioning logs into diameter-classes that reflect the underlying differences in the maturity of the trees giving rise to the logs. For E. obliqua logs, a cut-off diameter of 60 cm offers an appropriate distinction between regrowth-aged and mature-aged trees.     

闽江木材水运技术改革的研究

本文介绍了闽江木材水运的现状,提出并论证了在水口水电站建成后,适合于闽江木材水运的方式为拖轮拖运木捆排的方案;结合闽江航道的情况,研究了木捆排的尺寸及型式,并分析了将目前的单层木排拖运改革为木捆排拖运的经济效益。     

Effects of management on coarse woody debris volume and composition in boreal forests in northern Sweden

Forest management practices have led to a reduction in the volume and a change in the composition of coarse woody debris (CWD) in many forest types. This study compared CWD volume and composition in reserves and two types of managed forest in the central boreal zone of Sweden. Ten areas were surveyed, each containing clear-cut, mature managed and old-growth stands, to determine the volume of standing and lying CWD in terms of species composition, decay class and size class. Volumes of CWD on clear-cuts and in mature managed forests were high compared with previous studies. Old-growth forests (72.6 m³ ha^?1) contained a greater volume of CWD than mature managed forests (23.3 m³ ha^?1) and clear-cuts (13.6 m³ ha^?1). Differences were greatest for the larger size classes and intermediate decay stages. Despite stand ages being up to 144 years, CWD volume and composition in managed forests was more similar to clear-cuts than to old-growth forests.     

Sawing patterns for large-diameter sugi (Cryptomeria japonica D. Don) sawlogs: Current status and future outlook

Abstract

A survey was conducted at nine sawmills in Japan to evaluate and compare the sawing of sugi (Cryptomeria japonica D. Don) logs of 30 cm and more in diameter. The purpose was fourfold: (1) to document sawing patterns appropriate to the large-diameter logs; (2) to examine the composition of wood components (structural, nonstructural, and fixtures) produced from those patterns; (3) to investigate log and product prices; and (4) to ascertain distances to the log supplier and product markets. Impetus for the study arose from a forecasted shift in the diameter distribution of plantation trees in Japan; from small and medium-sized logs to large-diameter logs. With an overabundance of large-diameter domestic logs forecasted within the next decade, the need to understand how to best utilize and effectively process the large-diameter resource is of utmost importance.     

Combined production of sawn timber and firewood billets at a birch sawmill in Finland: A simulation approach

Abstract

Growing markets for chopped firewood have created alternative uses for the by-products of sawmills. Based on empirical data and simulated results, the potential of birch (Betula pendula Roth, Betula pubescens Ehrh.) from commercial thinnings for combined industrial production of sawn timber and firewood billets was investigated. In the simulations, different sawing patterns were used for logs intended to combine production of sawn timber and billets for chopped firewood (‘sawlogs’), and for logs intended only to firewood production (‘firewood logs’). Finally, economical feasibility analysis was done concerning the differences between the sawmills’ traditional business concept and the novel concept combining sawn wood and firewood production. The bucking results for the volume yield of different timber assortments varied only slightly between the different bucking options, i.e. the combinations of timber assortments. The main differences in the volumes of timber assortments were due to the stand type where the birch trees were sampled (planted, naturally regenerated, mixed birch–spruce). In the sawing procedure, the output of sawn timber varied between 24% and 42% of the log volume in the sawlogs, depending on the log diameter class. As the volume yield of sawn timber and firewood billets was counted together in the case of sawlogs, the log consumption was c. 1.75 m³ of roundwood per 1 m³ of sawn timber and firewood billets. In the case of the firewood logs, the log consumption rate was considerably lower, only c. 1.35. The economic calculations showed that using the firewood approach in sawing may increase the net added value of products by €1.9–5.4 m^?3 of logs, depending on their diameter class. As a conclusion, parallel production of sawn timber and firewood from logs from the first and second commercial thinning of birch-dominated stands is a concept that could work as an alliance between a sawmiller and a firewood entrepreneur. The concept could be competitive compared with both traditional sawmilling and production of chopped firewood.     

基于圆弧的原木轮廓的识别与验证

针对原木端面存在相交圆、阴影等导致原木轮廓难以获得完整的圆轮廓问题,提出了基于圆弧的原木轮廓识别方法.首先分析了圆弧在数字化图像中的性质,从各种边缘线条中区分出圆弧边缘;其次,定义验证模型,以判断识别结果是否为合格圆.结果表明,该方法可以从大量干扰的边缘中找到轮廓,并利用部分轮廓边缘识别原木端面.     

Attraction of Ips typographus (Coleoptera: Curculionidae) beetles by lure-baited insecticide-treated tripod trap logs and trap trees

The numbers of Ips typographus beetles captured by lure-baited insecticide-treated tripod trap logs (TRIPODs) versus classic trap trees (TRAP TREEs) were compared in a spruce forest in northeastern Czech Republic in the year 2012. During the time of I. typographus flight activity (22 April–24 August), TRAP TREEs were periodically deployed and replaced, while TRIPODs were deployed at the start of flight activity, and lure and insecticide were periodically refreshed. The numbers of I. typographus beetles captured was significantly greater on TRAP TREEs than on TRIPODs during the first sampling period (22 April–25 May) but did not differ between the two kinds of traps in the subsequent sampling periods (26 May–29 June, 30 June–27 July, or 28 July–24 August). More females than males were captured by both kinds of trap. Similarly, more beetles were captured in the spring (April–June) than in the summer (July–August) by both trap models. The main advantages of TRIPODs compared to the TRAP TREEs are twofold: first, that pheromone lures will make any spruce timber attractive to I. typographus; and second, that logs need not be decontaminated at a particular time and, consequently, they require significantly less surveillance.     

巨尾桉无性系人工林不同规格原木出材比例的测定

根据短周期巨尾桉人工林标准地伐倒木调查资料,编制对应林分平均胸径的不同规格原木比例表格,以方便查对一定胸径林分对应的不同规格原木出材比例,较为快捷地估算林分林木的经济价值。     

荷木小径材弯曲工艺

通过对荷木小径材薄板水煮软化工艺的研究 .结果表明该弯曲工艺可行 ,不使用金属钢板时弯曲性能可达 1 /1 7.最佳的工艺条件为 :水煮温度 80°C、水煮时间 1 5min/mm、初含水率2 5% ,并建立了软化工艺参数与试件弯曲质量的数学模型 ,作为实际生产的理论依据