不同阶段猪用颗粒饲料物理性能的对比分析

对某饲料厂不同阶段猪用4种颗粒饲料的物理性能包括直径、长度、硬度、容重、含粉率和耐久性指数（Pellet Durability Index, PDI）等进行测定,对结果进行归类总结并采用统计学的方法参照有关标准进行分析。结果表明,4种颗粒饲料直径在2.87~3.94 mm之间,母猪料直径最大,小猪料最小,两两之间差异显著（P<0.05）,而且随着猪只年龄的增加,颗粒饲料的直径呈递增趋势。颗粒长度在8.62~11.94 mm之间,以大猪料最长,小猪料最短,长径比偏高。颗粒硬度在3.86~6.47 kg之间,以大猪料最大,小猪料最小,中小猪料显著低于大猪料和母猪料（P<0.05）,只有小猪料符合有关要求。颗粒容重在576.7~614.6 g/L之间,母猪料最大,小猪料最小,两两之间差异显著（P<0.05）,与直径呈相同的增减趋势。含粉率以小猪料最大,且只有小猪料与大猪料之间差异显著（P<0.05）。颗粒PDI以大猪料最大,小猪料最小,各阶段猪料的含粉率和PDI均符合有关要求。建议饲料厂家注重颗粒饲料物理性能指标的控制,调整饲料配方和工艺参数,不断改进颗粒饲料的质量。     

Compatibility of root growth and tuber production of potato cultivars with dynamic and static water‐saving irrigation managements

The important root characteristics of root length density (RLD) and root mass density (RMD) generally differ among irrigation managements and potato cultivars. The objective of this study was to investigate the RLD and RMD variations and their functional relationships with gross potato tuber yield for two commercial potato cultivars, Agria and Sante, under different irrigation strategies. Full irrigation and water‐saving irrigation strategies, deficit and partial root drying irrigations, were applied statically (S) and dynamically (D) based on daily crop evapotranspiration. Results showed that SPRD had significantly greater RLD (3.64 cm/cm³) and RMD (132.7 μg/cm³) than other irrigation treatments. Between the potato cultivars, Agria had significantly larger values of RLD (3.50 cm/cm³) and RMD (138.7 μg/cm³) than Sante. The functional relationship between the root growth characteristics and tuber yield showed that under water‐saving irrigations, Agria increased root mass at the expense of gross tuber yield but Sante increased root mass to maintain larger gross tuber yields. However, Agria produced more roots and gross tuber yield than Sante, and it is concluded that Agria is a more drought‐tolerant potato cultivar, which is recommended for tuber production in regions where water might be scarce. It was shown that larger root production in potatoes was associated with improved tolerance to water stress.     

Establishing an eyeball-weight relationship for Litopenaeus vannamei using machine vision technology

This study aimed to establish a shrimp eyeball-weight relationship model for Litopenaeus vannamei using machine vision technology. A total of 295 shrimp were sampled from a recirculating aquaculture system (RAS). The long-axis length (d), body length (L), and body weight (W) of each individual was measured. The long axis length of the shrimp eyeball was identified and measured using machine vision technology. Continuous fitting and piecewise fitting models were used to construct the eyeball-weight relationship model for L. vannamei. The continuous fitting relationship model was described as: W = 38.865d^2.7914, while the piecewise model was described as: d < 2 mm, W = 0.0326d^3.7363, R² = 0.9288; 2 mm ≤ d < 3.9 mm, W = 0.0401d^3.104, R² = 0.9629; 3.9 mm ≤ d < 5.8 mm, W = 0.0421d^3.0311, R² = 0.9216; 5.8 mm < d, W = 0.103d^2.6226, R² = 0.9457. The root mean square error (RMSE) of the piecewise fitting model (0.0244, 0.1575, 0.5034, 0.7072) was smaller than the continuous fitting model (0.8229). The correlation coefficient (R²) of the piecewise model (0.9288, 0.9629, 0.9216, and 0.9457) was similar to that of the continuous fitting model (R² = 0.9621). The results indicated that the piecewise fitting model is suitable for calculating the biomass of L. vannamei in RAS and provides a novel way of estimating the biomass of L. vannamei cultured in RAS. The piecewise fitting model can also provide the foundation of evaluating the production of shrimp using underwater image recognition in intelligent aquaculture systems.     

柳杉花粉的散发规律

柳杉花粉囊为纵向开裂，雄球花在雨季对花粉具有保护功能；雌雄球花和花粉都对风媒传播发生了适庆性变化；花粉的散发，传播，沉降和空间分布，出现规律性变化，并受降水，气温，风力和大气湿度的综合影响。针对花粉散发特性，提出了经营种子园的有关建议。     

地被菊花粉萌发及花粉活力的研究

用ME的盐类和维生素附加16％聚乙二醇4000(PEG4000)和15％蔗糖对野菊及新红、塞旗红、玫瑰红的花粉进行培养。结果表明，萌发率分别为80．2％、85．3％、61．3％和46．5％。PE‰对菊花萌发有明显促进作用。但庶糖的作用不能被PEG所取代。菊花花粉萌发较合适的温度为10-20℃，在4-8℃时，萌发率及速度迅速降低，35℃萌发虽快。但花粉管短且破裂。在4℃条件下花粉可贮藏4-14d。但不宜干燥贮藏。     

应用极大似然法分析小麦穗长的遗传

采用质量—数量性状遗传的极大似然分析方法,对长穗小麦品系93(220)的主茎穗长进行了质量—数量遗传模型测验和主、微基因效应与变异估计。结果表明:长穗小麦新品系93(220)的主茎穗长为一典型的质量—数量性状,由一个主基因和若干微基因共同控制;一对隐性主基因控制穗长,附合加性——显性遗传模型,F1代表现为部分显性,隐性主基因增加主茎穗长的效应平均为1.47,微基因遗传效应为2.83cm,隐性主基因个体主茎穗长表现为长穗。     

果树自交不亲和性的遗传与生理机制及其研究

在简要介绍植物（包括果树）自交不亲和性与生理控制机制的基础上，着重对梨、苹果、杏等果树自交不亲和性的研究进行了综述，内容包括花柱内花粉管生长特点、花柱S糖蛋白的特性与作用机理以及果树自交不亲和的分子生物学研究，并提出了该领域有待研究的问题。     

Capnographic documentation of nasoesophageal and nasogastric feeding tube placement in dogs

Objective: To evaluate the ability of capnography to document proper placement of nasoesophageal (NE) and nasogastric (NG) feeding tubes. This study was conducted in 3 phases. Phase I of this study was designed in order to test the efficacy of capnography to distinguish placement of a feeding tube in the alimentary tract versus the respiratory tract. Phase II was designed in order to document that carbon dioxide (CO₂) could be measured through a polyvinyl chloride (PVC) feeding tube. Phase III was performed in order to evaluate the technique of continuous monitoring during insertion of the feeding tube into the esophagus and stomach as would be performed during a clinical‐tube placement. Design: Prospective study. Setting: Research laboratory. Animals: 24 adult dogs. Interventions: In Phase I, sedated dogs were instrumented with an intratracheal catheter and an 8 French feeding tube placed nasally into the distal esophagus and later advanced into the stomach. In Phase II, dogs were anesthetized and an 8 French feeding tube was placed down the endotracheal tube, then into the esophagus and later advanced into the stomach. In Phase III, sedated dogs were instrumented with an 8 French feeding tube inserted intranasally and then advanced to the level of the nasopharynx, distal esophagus and, lastly, the stomach. Fluoroscopy was used in order to determine location of the feeding tube. Measurements and main results: Phase I measurements included respiratory rate and CO₂ from the trachea, esophagus, and stomach and pH of gastric fluid sample. Phase II measurements included respiratory rate and CO₂ from the endotracheal tube, feeding tube in the endotracheal tube, feeding tube in the distal esophagus, and feeding tube in the stomach. Phase III data collection included respiratory rate and CO₂ as the tube was passed through the nasal cavity, nasopharynx, esophagus and stomach. Phase I fluid samples were collected from 5 of the 9 dogs and had pH values from 1.68 to 4.20. In both phases, values for the respiratory rate and CO₂ from the esophagus and stomach were 0 ± 0, significantly lower (P < 0.001) than the values from the trachea. In Phase II, there was no significant difference between the respiratory rates (P = 0.886) and CO₂ (P = 0.705) readings obtained from the endotracheal tube compared to readings from the feeding tube in the endotracheal tube. In Phase III, there was a significant difference (P < 0.001) between the respiratory rates and CO₂ readings obtained from the nasal cavity and the nasopharynx when compared to those readings obtained from the esophagus and stomach. Measurement of CO₂ and respiratory rate resulted in a reading of 0 every time the feeding tube was in the esophagus or stomach. Conclusions: Capnography may be used in order to detect airway placement of NE and NG tubes.     

RT-PCR及RFLP分析技术对鸡传染性支气管炎病毒的诊断和S1基因分型的研究

本研究使用分别扩增整个S1糖蛋白基因 (引物A)和S1糖蛋白基因N_端高变区Ⅰ (引物B)的 2对引物对 3个IBV标准株M41、Connecticut、Arkansas及 5个地方分离株 (C60 ,D41A ,D41B ,A112 1,A1171)进行RT_PCR扩增。用引物A时 ,有 5个IBV毒株扩增到目的片段 (172 0bp) ;用引物B时 ,所有 8个IBV毒株均得到与预计大小相符的目的产物 (2 2 8bp)。对 172 0bp的PCR产物用限制性内切酶HaeⅢ进行酶切 ,结果得出 3个不同的RFLP图谱 ,其中M41、Connecticut、D41B具有相同的HaeⅢ酶切图谱。Arkansas和D41A则分别具有互不相同的图谱 ;对 2 2 8bp的PCR产物进行DdeⅠ、RsaⅠ限制性内切酶消化 ,根据它们的RFLP图谱 ,8个IBV毒株可分为 5个基因型。综合 2对引物的PCR产物的RFLP分析结果 ,8个IBV毒株可分为 7个基因型 ,分型的结果与传统的血清学方法吻合。本研究建立的方法和技术具有快速、简单、特异、灵敏等优点 ,为现场流行毒株的定型(基因型 /血清型 )及其S1基因变异的跟踪研究以及更有效防制传染性支气管炎奠定了基础。     

Evaluation of Five Most Commonly Grown Cotton Cultivars (Gossypium hirsutum L.) Under Mediterranean Conditions: Productivity and Fibre Quality

Studies were conducted in four regions of central Greece (Larisa, Karditsa, Livadia, Thiva), to evaluate the productivity and fibre properties (fibre strength and fibre length) of the five most commonly grown cotton cultivars in these regions. The experiments lasted for 6 years (1995–2000). All the characteristics tested were strongly influenced by the factors ‘year’, ‘cultivar’ and ‘region’. Significant cultivar × region, year × cultivar, region × year and cultivar × region × year interactions occurred for all the characteristics studied. The cultivar Alegria had the highest seed‐cotton and lint yield, while Aria had the lowest ones. Both cultivars gave the highest mean lint percentage but the lowest mean boll weight (MBW). Alegria had the lowest fibre strength, while Aria had the highest. The Acala‐type cultivars, Acala SJ2 and Zeta 2, had intermediate seed‐cotton and lint yield, while Vered 171 had high seed‐cotton and satisfactory lint yield. The three cultivars mentioned above had the highest MBW and very good fibre strength. Positive correlation was observed between fibre strength and length. In spite of the fact that mean fibre length was statistically the same in all cultivars, it was influenced by the factor ‘year’, as a result of different weather conditions. The year 1996 was the most unfavourable one for seed‐cotton yield and MBW, because it was characterized by lower than average air temperatures and rather dry conditions for all study sites. The factor ‘region’, a combination of different climatic conditions and cultural practices, influenced significantly all the parameters studied.