木质纤维素的降解和五种酶的活性对香菇子实体形成的影响

本文从生化角度研究了F型(形成子实体)和N型(不形成子实体)两类香菇菌株在生长发育过程中生化代谢活动上的差异。结果表明,在香菇的整个生长过程中,F型菌株的纤维素酶、半纤维素酶、漆酶、酸性蛋白酶和果胶酶的活性均高于N型菌株,尤其在形成子实体的第二和第三阶段,纤维素酶、半纤维素酶和酸性蛋白酶的活性均呈较大幅度的增加,这种趋势与胞外可溶性蛋白含量的增幅是一致的,同时F型菌株对培养基中木质素、纤维素和半纤维素的降解能力也高于N型菌株,说明在形成子实体的过程中,F型菌株具有比N型菌株相对更强的生化代谢能力;各种与物质降解有关酶的代谢活动在某些环节上受阻或不能有效地表达是N型菌株不能形成子实体的一个重要生理原因。     

晚实核桃优良新品种‘冀丰’

 ‘冀丰’为晚实核桃新品种, 光滑, 仁饱满, 单果质量11. 19 g, 种壳厚1. 14 cm, 出仁率58. 5 %, 粗脂肪含量68. 53%; 丰产优质, 抗逆性强, 适宜华北核桃产区及与之土壤气候条件相近地区栽培。     

处理主干和主枝对光皮树幼树早花早实的促进效果

对3年生光皮树幼树,采用环割倒贴皮、铁丝绞缢、绳索绞缢、环刻4种人工造伤方法分别对其主干和主枝进行处理.结果表明:4种处理方法对树干直径和冠幅生长的影响差异不显著;铁丝绞缢主枝法处理,其树高及开花株数和开花数量都与其他处理存在显著差异;铁丝绞缢主枝与铁丝绞缢主干法促进开花的效果差异不显著.     

几种修剪树型对'珍珠'番石榴开花坐果及产量的影响

选用4年生'珍珠'番石榴为试脸材料,采用开心形、圆头形、平头形树型结构,以果树生产中采用的自然圆形树型结构为对照,研究4种树型修剪方法对'珍珠'番石榴新梢数、花蕾数、开花结果数及果实产量的影响.试验结果表明,'珍珠'番石榴树型圆头形、开心形促进开花坐果较好,圆头形有利于提高产量.     

油茶幼林结实与果枝特性研究

通过对油茶自花授粉全同胞子代、无性系间控制授粉全同胞子代、半同胞子代和无性系四种不同群体的结果枝特性和开花结实特点等主要经济性状的研究,揭示了四种群体及其优良林分的结实特性和产量规律,为油茶杂交组合、优良家系和无性系等良种的生产应用和栽培技术、以及进一步开展杂交和选择育种研究积累了必要的技术和理论知识。     

定向出菇技术对香菇产量和品质的影响

为了摸清定向出菇新技术对香菇(Lentinula edodes)产量和品质的影响,以传统免割保水膜袋法为对照,开展了定向出菇新技术的出菇试验。试验选用2个香菇品种L808和兴农1号,统计香菇产量,测量子实体形态的变化。结果表明,定向出菇新技术在产量上的表现因品种而异,对于品种L808,采用2种栽培方式,其产量持平;而对于品种兴农1号,采用定向出菇技术栽培的产量显著高于传统免割保水膜袋法;新技术在单菇重、菌盖直径等子实体形态特征指标方面优于传统的免割保水膜袋法。研究表明定向出菇新技术可用于香菇栽培。     

袋栽黑木耳菌包困菌出耳的技术误区分析

本文针对黑木耳袋料栽培工艺中的困菌出耳技术误区进行了剖析,分析了该误区现状及产生原因,并提出了相应的对策,以期为科学袋栽黑木耳提供参考。     

南京地区3个兔眼蓝莓品种引种试验

对2014年种植于南京市白马地区的3个兔眼蓝莓品种‘巴尔德温’（Baldwin）、‘蓝美人’（Bluebelle）和‘布莱特蓝’（Briteblue）进行连续2年生长及开花结实性状的调查研究。结果表明,3个兔眼蓝莓品种能较好适应南京地区的气候环境,植株生长、结果性状均表现正常,其中品种‘巴尔德温’是兔眼蓝莓品种中较晚熟的品种,其树势和耐旱性较强,适宜在降水量较少的干旱丘陵地区种植;品种‘蓝美人’对土壤的要求较严格,果实采收时果皮易撕裂,不适宜贮存和运输,该品种适宜于庭院精细栽培;品种‘布莱特蓝’成熟期较晚,产量和总花色苷含量较高,香味浓郁且耐贮运,可作为加工兼鲜果销售品种推广。     

长白山鸡爪苓子实体的组织分离培养及其酯酶同工酶分析

以鸡爪苓子实体为分离材料,对子实体的不同部位进行组织分离,并对分离得到的纯培养菌株进行酯酶同工酶分析,结果表明,菌柄基部是最佳分离部位,菌株萌发成活率最高;分离材料与产地的不同使得分离菌株之间的EST同工酶谱带表达有明显的差异。     

Alleviation of alternate bearing phenomenon in mango (Mangifera indica L.) trees using boron and nitrogen fertilization

Abstract

This investigation was conducted during two successive seasons (2014/2015) and (2015/2016) using 15?years old productive mango (Mangifera indica) trees cv. Zebda. The trees were grown at AlMalak Valley Farm, El-Sharkeya Governorate- Egypt (30–51° North; 32–53° East). Trees were planted 8?×?8 meter within and between rows in sandy soil under drip irrigation system using the Nile water. The objective of this study is to alleviate alternate bearing in cv. Zebda using mineral nutrients (nitrogen in the on year and boron in the off year). Treatments included three concentrations of nitrogen (1000, 1250, 1500?g/tree/year) and three concentrations of boron (0.0, 250, 500?mg L^?1). Nitrogen was applied to the soil as ammonium sulfate and boron was applied as foliar spray of boric acid. The extra amount of nitrogen fertilizer (250 and 500?g N/tree) was applied at three installments in (May, June and July). Treatment was arranged in a factorial Completely Randomized Block Design with three replicates for each treatment. Results show that the on-year nitrogen fertilization significantly increased mango tree vegetative growth (number of shoot/branch, shoot length, shoot thickness, number of leaves/meter and leaf area) and yield. The average yield in the on year is 85.5?kg/tree at 1250?g N/tree but 67.4?Kilogram/tree at 1000?g N/tree (the control treatment). While in the off year boron foliar application resulted in a significant increase in flowering, initial fruit set, final fruit set and fruit yield. The average yield in the off year is 47?kg/tree at 250?mg L^?1 boron but 9?kg/tree at 0.0?mg L^?1 boron rate (the control treatment).The interaction treatment of 250?mg L^?1 boron + 1500?g nitrogen/tree is the best treatment as it resulted in the highest values for all the tested parameters. The average yield of this treatment is 53.5?kg/tree. This treatment helps alleviate alternate bearing phenomenon by 41% and obtain the highest economic yield in the off-year, i.e. increased yield by 5.9 fold.