果树技术经济效益评价的程序与方法研究

本文结合果树生产实际,阐述了果树生产技术经济效益评价研究的基本方法、基本程序步骤和各步骤实施的要求,对评价结果的分析方法进行了较为详细的说明。其中包括对比分析法、试算分析法、边际分析法在果树生产技术经济效益评价研究上的应用。同时本文对该课题中所涉及的几个果树技术的经济效益评价方法程序进行了各论。     

马铃薯品种抗软腐病测定条件的研究

用全薯块吸头刺伤接种法测定时,较理想的测定条件为:每接种点接种0.1ml浓度为10~2～10~5CFU/ml菌悬液,随后在21±5℃～31±5℃(依所用菌株而定)下保持2～3天,以接种点腐烂斑的最大直径作记载标准。用新鲜薯片法测定时,除接种浓度为10~2～10~3CFU/ml,保持时间为1～2天及以侵染限值作评价标准外,其余条件和全薯块吸头刺伤接种法相同。当用皮孔浸渍法接种时,薯块在10_6CFU/ml菌悬液中浸5分钟,然后使薯块表面保持连续水膜,3～5天后测量薯块表面腐烂面积。上述3种方法都必须有20个以上重复,并使用大小一致、无伤无病的成熟薯块。     

医疗器械行政处罚裁量权研究

当前医疗器械处罚自由裁量存在一些亟需解决的问题，这些问题的产生有自由裁量权法律设置上的，有执法主体方面的，有自由裁量内外部环境方面的。针对上述问题，需要从抽象和具体两个方面着手加强医疗器械行政处罚自由裁量权建设。所谓抽象，就是要就加强医疗器械行政处罚自由裁量建设设立总的原则和方向。所谓具体，就是要从具体的法律法规的完善、医疗器械行政处罚主体建设、行政执法环境建设等方面着手。     

基于PLC与组态王的实木板材双面检测装置的总体设计

选用S7-200 PLC,结合组态王人机交互界面,运用激光轮廓和色泽集成扫描技术设计了一种实木板材双面检测系统。主要介绍了该检测系统的工作原理和工作流程,简述了检测装置的整体结构及其传动、升降、检测、行程控制等主要模块的设计及电气控制系统总体设计。试运行表明,该装置集合PLC和组态王的优势,利用激光扫描技术,可实现对板材双面检测过程的实时控制;板材检测运用色泽与轮廓相结合,有效地解决了现有实木板材单面检测系统不能全面地反映实木板材表面缺陷状况的难题。该设计可为实木板材表面缺陷检测中三维轮廓检测技术的进一步应用提供有益参考。     

Relationship between corn yield and chemical composition of the ear leaf measured with different regression models

Abstract

Corn yields and leaf samples were obtained from experimental plots receiving varying rates of N, P and K. Yields were regressed on leaf levels of N, P, K, Ca, Mg, B, Cu, Fe, Mn and Zn as independent variables. Various polynomial regressions were fitted to the yields and “goodness of fit”; of particular mathematical models was used as a basis for evaluating particular biological and statistical concepts.

It was found that no regression, where chemical elements were used as ratios, fit the observations as well as a quadratic polynomial or its square root transformation. This suggests that within the set of data used, emphasis on particular cation or anion ratios does not necessarily result in the “best”; explanation of variation in yield.

“Classical”; growth equations were fitted to corn yields, but were not as precise in predicting yields as the polynomials. A modified stagewise regression procedure was used for fitting one mathematical model, but results were less satisfactory than those obtained with usual least squares procedures.     

Study on the Change Rule of Egg Yolk Antibody in Laying Hens after First Immunization by Japanese Encephalitis Virus

The purpose of this experiment was to study the immunization rule of the egg yolk antibody affected by different vaccines,immunization dose and injection ways and further to discuss the optimal immunization procedures of the laying hens for the preparation of egg yolk antibody against swine Japanese encephalitis virus.180 brown laying hens without any vaccines were selected and divided into 18 groups randomly,each group of 10 hens.Groups 1,2 were the control groups,injected with the sterile saline;Groups 3 to 10 were injected with subcutaneous or intramuscular injection,and the vaccine was injected with 0.2,0.5,1.0 and 1.5 mL successively.Groups 11 to 18 were also adopted two kinds of injection,followed by the same dose of vaccine immunization.Six eggs of each experimental group were gathered before immune day and after 3,7,10,14,18,21 and 28 days,the egg yolk antibody was extracted and the titer was determined.As a result,the egg yolk antibody titers of groups 1 to 6,11 and 12 were all 0,and no significant immune response produced;The hens from 7 to 10 groups were injected with the inactivated vaccine.After 7 days,the average antibody titer reached the peak,and the duration of the antibody was 14 days.The hens from 13 to 18 groups were injected with the attenuated virus vaccine.After 14 days,the average antibody titer reached the highest value,and the duration of the antibody was 21 days.The egg yolk antibody titers were not significantly different in the two compared experiment groups with the same injection dose but with different injection ways (P>0.05).With the same injection way of each experiment group,and the difference was significant (P>0.05).Compared with some groups with the same injection and vaccine,the titer of yolk antibody was gradually increased with the increase of the immune dose,and the difference was significant (P<0.05).The results showed that,no matter intramuscular or subcutaneous injection,in order to produce a significant immune response to hens,the immune antigen dose was 1.0 mL inactivated vaccine or 0.5 mL attenuated vaccine at least.Compared with the attenuated and inactivated vaccine,inactivated vaccine stimulated the body to produce the antibody faster,but the maintenance time was shorter;The lower dose of attenuated vaccine could stimulate the body to produce antibodies,but the speed was slower,the maintenance time was longer.     

Comparison between Calibration Procedure and Econometric Estimation

The two methods of estimating parameter in computable general equilibrium(CGE) model are introduced and compared:the calibration procedure and econometric estimation. The conclusions are:the estimation of parameter in CGE model must use the calibration procedure coupled with the econometric estimation method;the elasticity of output with respect to labor input,the marginal expenditure share for households and price elasticity of export demand are estimated by econometric estimation method;and other parameters of the CGE model can be get by calibration procedure.     

UASB反应器三相分离器的设计方法

气固液三相分离器是UASB反应器的重要构成部分。本文提出了一整套三相分离器的设计方法,提供了一些设计参数,并且介绍了三相分离器的设计实例。     

Passage of sediment through flumes and over weirs

This paper reports on laboratory research on the sediment passagecapability through long-throated flumes and broad-crested weirs withwhich the Froude number in the approach channel does not exceed 0.6over a distance of about 20 times the water depth upstream of thestructure. Design rules are given for any combination of flume or weirin combination with any channel.     

液压悬挂试验的加载误差及其补偿

通过对下支点固定式油缸加载工况下拖拉机液压悬挂装置的受力分析，推导出这种国内外常用试验台设计方案的加载误差，并给出试验数据的修正方法以补偿该项误差的影响。