An investigation on the effect of heat-moisture treatment on baking quality of wheat by using response surface methodology

Effect of heat-moisture treatment on quality properties of two bread wheats (cvs. Tosunbey and Bayraktar) were investigated by using response surface methodology (RSM). Temperature and moisture conditions in the experimental design were in the range of 55–95 °C and 13–19%. Heat-moisture treated grains were milled into flour and quality properties were determined. The optimum moisture-temperature combination for the highest dry gluten, Zeleny sedimentation, Alveograph W and bread volume values were estimated as 14%-63 °C for Tosunbey and 19%-55 °C for Bayraktar samples. Alveograph W seems to be a good indicator of baking quality for wheats treated at higher temperatures. In order to describe the relationship between the dependent and independent variables (moisture, temperature), the response values were fitted by second order polynomial models. Significance analysis showed that the effect of both moisture and temperature on dry gluten content, sedimentation and falling number values for Tosunbey; falling number and damaged starch values for Bayraktar were significant (p < 0.05). The effect of temperature on Farinograph water absorption, W and P/G, bread volume and firmness values were significant for both cultivars (p < 0.05). It can be concluded that improvement in baking quality can be achieved and flours with different properties can be produced by heat-moisture treatments on wheat.     

高温条件下超级稻对灌水处理的响应及原因分析

为预防高温天气对超级稻的影响,通过灌水深度和灌水时期试验,研究了超级稻产量和结实率对不同灌水深度和不同灌水时期的响应及原因。结果表明:不同灌水深度处理产量及结实率存在显著差异,灌水能提高产量和结实率,灌深水的效果比灌浅水好。不同灌水时期处理,灌水提高产量和结实率的幅度不同,效果最好的是在幼穗分化五期￣齐穗。不同灌水处理影响产量和结实率的原因是灌水能降低田间温度、减少日平均温度≥30℃或最高温度≥35℃天数以及灌水时超级稻发育对温度敏感程度不同。     

Prediction of breeding values for osseous fragments in fetlock and hock joints, deforming arthropathy in hock joints, and pathologic changes in the navicular bones of Hanoverian Warmblood horses

The results of a standardised radiological examination of 5928 Hanoverian Warmblood horses selected for sale at auction were used to predict relative breeding values (RBV) in the 23,662 horses included in the last four generations of the probands' pedigrees. The distribution of the RBV was investigated in the whole four-generation pedigree, in the probands and in those stallions that contributed at least three offspring to the probands. The RBV of the probands' sires were further compared with the officially published performance-based relative breeding values, i.e., total indices dressage (TID) and jumping (TIJ). The sires' level of dressage indices was considerably higher (mean TID=110) than of the jumping indices (mean TIJ=98). Total indices radiographic findings (TIR) were calculated for the sires with varying weighting given to the individual RBV. In each case, this resulted in a mean TIR of 99. Finally, total indices were derived from TIR and TID and/or TIJ in order to develop different selection schemes for all-purpose breeding and for breeding focused on dressage and show jumping. All breeding values under consideration increased by between 1% and 19% when radiographic findings were weighted with between 30% and 60% complementary to the corresponding performance parameters, and when only sires were selected with above average total indices. At the same time, the prevalences of the radiographic findings investigated here were lowered by up to 10% each. When only one radiographic finding was considered at a time, the maximum attainable response to selection was a 16-23% increase in the relative breeding values and a relative decrease in prevalences of radiographic findings of between 31% and 52%. The results of this study indicate that it is possible in horse breeding to consider simultaneously health and performance traits. Medical data should be included in the prediction of breeding values in order to improve the radiological status of today's riding horses.     

Practical use of response surface methodology for optimization of veterinary antibiotic removal using UV/H2O2 process

Three of the most commonly used veterinary antibiotics—enrofloxacin (ENR), sulfamethoxazole (SMX), and oxytetracycline (OTC)—were chosen as representative antibiotics for UV/H₂O₂ treatments. The objective was to determine the optimization of UV/H₂O₂ to remove antibiotics from aquaculture discharge water using response surface methodology. The degradation of the antibiotics was investigated under varying UV/H₂O₂ conditions in environments with different levels of pH, water matrices, humic acid, and constituent ions. The degradation results demonstrated that increasing the H₂O₂ dosage facilitated ENR degradation at a neutral pH while facilitating degradation of SMX and OTC at a slightly acidic pH. The optimum removal conditions for ENR, which was used in all influential effect experiments and the contact tank experiments, was obtained at 10 mM H₂O₂, a pretreated COD of 87.51 mg L⁻¹, and an initial pH of 6.15. Among the tested anions, only the presence of Cl^- showed slight positive effects on ENR degradation, due to the generation of secondary active radicals. During the reaction, the hydroxyl radical (OH) was present at a higher pH while singlet oxygen (¹O₂) was slightly present at a lower pH. The experimental results from H₂O₂ sequential addition indicated that freshly added H₂O₂ could quench the recently generated OH and therefore a high H₂O₂ concentration with frequent adding was not necessary. Our contact system reduced the ENR concentration in both the effluent reservoir and in the UV irradiation zone. The overall results supported the use of the UV/H₂O₂ system to treat remnant antibiotics in the discharge water.     

基于响应面法的板料成形工作模面几何参数优化

阐述了以响应面法建立板料成形参数与有限元模拟结果的代理模型的基本原理;介绍了板料成形中的设计变量、目标函数、约束条件,多目标优化的处理方法;基于响应面法.以汽车后桥悬架内板零件为研究对象,成形后最小板料厚度为优化目标,成形极限图为约束条件,建立了模面几何参数优化模型;对模面几何参数进行优化并获得最优参数组合;以最优几何参数组合进行了实际的冲压试验,验证了优化结果.     

棉花化学调控对不同品种的作用效果

通过棉花化学调控对不同品种反应程度,比较海岛棉血统品种（系）、新疆棉花品种（系）和辽棉品种（系）等在相同化学调控条件下的综合表现,结果表明：不同棉花品种（系）对化学调控的反应有明显差别,具有海岛棉血统棉花品种（系）反应不敏感,新疆棉花品种（系）反应较敏感,辽棉品种（系）属于中间类型。同时,化控对于新生的器官影响较大,也印证了化控药剂在植株体内有一个吸收和分解的过程。     

南方馒头加工中的辅料配比优化研究

为给改进实验室馒头制作和评价方法提供参考依据,以3种弱筋面粉(市售美玫牌面粉;磨自弱筋小麦品种宁麦9号和生选6号的面粉)为基础粉,采用响应面法中心组合试验设计,研究了酵母、糖、起酥油和泡打粉含量对南方馒头加工品质的影响,并建立了南方馒头感官得分与因素变量的二次回归模型方程,该模型回归显著。响应面分析结果表明,南方馒头加工中的最佳辅料配比条件为:酵母含量1.0%、糖含量15.0%、起酥油含量1.8%、泡打粉含量1.0%。在此配比条件下,3种弱筋粉制作南方馒头的感官得分预测值分别为86.5、88.3和84.5分,验证值分别为86.1、87.8和83.7分,与预测值的相对误差分别只有0.46%、0.57%和0.95%。     

不同类型小麦品种孕穗期低温生理反应及其抗寒性分析

为明确冬小麦抗低温倒春寒的生理机制,以多穗型小麦品种济麦22、邯6172和大穗型小麦品种临麦4号、潍麦8号为材料,研究了孕穗期低温(1℃、-2℃)对小麦叶片可溶性糖、可溶性蛋白、脯氨酸和丙二醛(MDA)含量以及超氧化物歧化酶(SOD)活性的影响。结果表明,在低温处理当天,1℃低温下,4个品种的可溶性糖、可溶性蛋白、脯氨酸和MDA含量均不同程度增加,SOD活性除济麦22外均提高;-2℃低温下,可溶性糖和脯氨酸含量增加更明显,SOD活性除临麦4号外均降低,各品种MDA含量均显著减少。低温处理第3d和第6d,低温最初诱导产生的脯氨酸逐渐减少,MDA含量大幅降低,其余指标均增加。经用隶属函数法综合分析,4个品种的抗寒性相近,穗型间差异不明显。     

响应曲面法优化美拉德反应以制备蘑菇酪氨酸酶活性抑制组分

MRPs作为天然抗褐变剂,可抑制引起果蔬酶促褐变的酪氨酸酶的酶活。为进一步优化美拉德反应以制备酪氨酸酶活性抑制组分,本研究采用响应面法对MRPs制备工艺进行研究。在单因素实验基础上,确定美拉德反应初始pH、反应温度、反应时间、底物浓度比(糖∶氨基酸)4个因素,设计4因素5水平的二次回归中心组合试验。经响应面法分析,为方便实际操作,确定最佳工艺条件为:初始pH为2.94,反应时间为1.9 h,反应温度为110.09℃,底物浓度比(糖∶氨基酸)为0.57。经实验验证,得出结果与理论值相对误差较小,故采用二次回归中心组合设计得到的最优MRPs制备条件参数准确可靠。     

近150年北京春季物候对气候变化的响应

对北京春季6种物候的计算得出其代表性指标一山桃始花期，并分析物候对气温变化的响应模式。根据气温变化态势，将历史时期气温和物候资料划分为4个时间段，并采用u检验论证时间段间具有显著性差异，分析物候期对气温变化的响应模式和机制，得出：物候期的提前与推迟对温度的增高与降低的响应是非线性的，在同等增、降温幅度下，因降温而导致的物候期推迟幅度较因增温而导致物候期提前幅度小；平均气温增高1℃，北京春季物候期提前2．8—3．6d。并估算了未来北京春季物候变化趋势。