Structural,rheological and gelatinization properties of wheat starch granules separated from different noodle-making process

In this study, three typical wheat cultivars (ZM366, AK58, and ZM103) with high, medium, and low gluten strength, respectively, were selected as the raw material. The starch granules separated from different stages of the noodle-making process, including kneading, resting, sheeting, cutting, and drying, were used to explore the structure, dynamic rheology, and quality of the noodles. The D50 (median diameter) of the starch granules decreased during the noodle-making process, and the reduction was enhanced by an increase in the gluten strength of the flour. Between steps 4 and 5 of the noodle-making process, the solubility of ZM103 variety increased from 4.3% to 5.0% at 80 °C, while the peak viscosity decreased from 3626 to 3386 mPa s, which resulted in a decrease in the cooking loss of noodles. Similar trend was observed in the ZM366 and AK58 varieties. The gelatinization enthalpy was reduced, suggesting that the crystalline regions of the starch granules were destroyed during the kneading process. Between steps 4 and 5 of the noodle-making process, the elastic modulus of the starch granules significantly increased, while the temperature at which maximum elastic modulus was decreased, indicating an increase in the crystalline stability of starch during the drying process. Correlation analysis indicated that the changes occurred to the gelatinization property was primarily due to the change in the particle size.     

Structural and Rheological Characteristics of Alginate from Sargassum cristaefolium Extracted by Twin Screw Extruder

This study aimed to investigate the effects of process extrusion on the characteristics of Sargassum cristaefolium sodium alginate (SCSA) extracted using twin-screw extruder. Box-Behnken Design (BBD) from response surface methodology (RSM) was established to understand the effects of temperature, screw speed, and pH on the multiple-responses of alginate characteristics including intrinsic viscosity, yield, and molecular weight. The results revealed that temperature, screw speed, and pH significantly affected (P < .05) all responses. The optimum extraction condition was found at temperature of 58.18°C, screw speed of 77.99 rpm, and pH 10.11. At this condition, the response of residence time distribution was 7.07 ± 0.029 min, yield of 34.01 ± 0.12%, intrinsic viscosity of 460.13 ± 14.75 mL/g, and molecular weight of 217.94 ± 7.14 × 10³ g/mol. This alginate had mannuronic acid to guluronic acid (M/G) ratio of 0.28, and the L-guluronic acid block was 0.78, which was higher than the D-mannuronic acid block. Rheological characterization of SCSA in aqueous solution was shear-thinning pseudoplastic, and alginate gel in 1 M CaCl₂ was more elastic than liquid.     

基于本构模型的颗粒饲料成型特性研究

为研究饲料原料挤压成型特性,构建了非线性黏弹塑性颗粒饲料成型本构模型,针对主要饲料原料小麦,通过分析成型试验因素对其本构模型系数及其表征的流变学特性的影响,研究物料特性、加工参数等对小麦原料成型特性的影响规律,并分析了模型系数与颗粒成型质量的相关性关系。黏弹塑性本构模型由牛顿黏滞体(Newton viscous dashpot element)、应变硬化弹簧元件(strain hardening spring element)和库伦摩擦元件(Coulomb friction element)构成,基于小麦原料的实际成型试验完成模型构建;模型验证结果显示:数值结果中各应力区间模型决定系数R2在0.99以上,模型值与试验值较为吻合,相对误差总平均值为3.378%,并通过χ2检验进一步证明模型有效性;应用本构模型对小麦原料成型特性的分析结果显示,表征其流变学特性的模型系数表现出明显的应力函数规律,黏性系数绝对值随着挤压过程的进行逐渐减小,弹性模量值逐渐增大,集成塑性系数值则表现为先增后降,而各成型试验因素对模型系数产生了显著规律性影响,与宏观试验现象比较吻合;通过Pearson相关性分析可知颗粒成型密度、颗粒成型率、颗粒成型硬度等成型质量指标分别与黏性系数、塑性模量与弹性模量间达到了最高的相关系数,数值皆在0.80以上且为极显著相关性水平(P0.001),为基于本构模型对颗粒成型质量进行分析和控制提供依据。研究结果为颗粒饲料挤压成型特性研究提供了一种新方法和新角度,也为颗粒饲料的高效低耗生产和产品质量的改善提供基础数据和理论参考。     

不同含水率高易溶盐含量的伊犁黄土流变特性

流变学研究方法可以揭示黏弹性物质的流动和变形规律,常被应用于土体结构的力学稳定性及长期变形参数研究。为了深入探究伊犁黄土类土的黏弹性和结构稳定性,该研究采用流变仪对不同含水率和易溶盐(Na₂SO₄)含量的伊犁黄土类土进行了稳态和动态流变试验,引入Bingham模型对小剪切速率下的流变曲线进行了拟合,并分析解释了稳态和动态流变试验的演化过程。同时,讨论了含水率及易溶盐含量对稳态和动态流变参数的影响规律,定量分析了流变参数与各变量之间的关系。结果表明：稳态剪切过程中土体由固态向类固态转化,并最后趋于流态,具有剪切变稀行为;随着含水率及易溶盐含量增大,屈服应力和黏度均减小,且屈服应力在300～1 100 Pa之间。随着含水率和易溶盐含量增大,动剪切强度参数和黏弹性参数均线性减小,土体的结构稳定性降低。当剪切应变小于0.1%时,土体处于线性黏弹区,损耗因子变化不大;剪切应变大于0.1%时,损耗因子逐渐增大。高含水率及高易溶盐含量的土壤最先到达屈服点,说明高含水率和高易溶盐含量不利于土体结构的稳定性。随着含水率的增大,易溶盐含量对流变参数的影响程度变小...     

国外农业生物材料研究中的力学试验

本文综述了近30年来国外农业生物材料研究中的力学试验及其主要成果,对农业现代化、农业机械设计、机械化收获、加工、运输、提高产量、评价农产品等方面均有意义。     

超声波一步法制备纤维素氯化锂/二甲基乙酰胺溶液

运用超声波一步法制备了纤维素氯化锂/二甲基乙酰胺的离子溶液。通过调节超声波功率和处理时间,对纤维素、氯化锂和二甲基乙酰胺混合物超声波处理5~7 min,并于室温下搅拌3~5 h,即可获得纤维素均匀溶液;研究了超声波处理对纤维素分子及形态结构的影响,并对纤维素溶液的流变性能进行了考察。结果表明,超声波一步法具有工艺简单、易操作以及溶解时间短的特点,所得到的纤维素溶液具有高分子溶液的一般特征。     

Dough rheological properties and noodle-making performance of non-waxy and waxy whole-wheat flour blends

Dough rheological properties and noodle-making performance of non-waxy whole-wheat flour (WWF) with partial- or full-waxy (PW- or FW-) WWF substitution were studied. The substitution levels were 0, 250, 500, 750, and 1000 g/kg, respectively. FW-WWF reduced the peak viscosity and pasting temperature of WWF blends as its substitution level was increased due to its higher proportions of B-type starch granules and short amylopectin chains, while PW-WWF increased peak viscosity with the increasing substitution level because of its higher amylopectin content. As demonstrated by farinograph and rheometer measurements, FW-WWF interfered with gluten development because of the increased competition for water by arabinoxylans and amylopectin; however, PW-WWF enhanced dough strength due primarily to its increased protein content. Consequently, FW-WWF showed a detrimental effect on cooked noodle texture as the cooked noodle hardness was reduced by 50% at the 1000 g/kg substitution level. In contrast, PW-WWF enhanced noodle integrity and elasticity by increasing cooked noodle cohesiveness and resilience by 10.1% and 14.8%, respectively, at the 1000 g/kg substitution level. The results suggest that with waxy WWF substitution, the changes in starch composition, arabinoxylans, and protein content could modify the interactions among flour components and influence the quality characteristics of noodle products.     

优质强筋小麦龙麦30配粉特性的研究

以强筋小麦龙麦30为主粉与中筋小麦克丰6号等3个品种进行不同比例配粉研究其面包烘焙品质的影响。试验结果表明,龙麦30与面筋含量高,面团拉伸阻力适中,延伸性长的克丰6号品种搭配,配粉以60%∶40%比例的湿面筋含量和延伸性显著增加,面团流变学特性加以改善,蛋白质数量与质量指标较为均衡,面包体积增大,面包芯部结构、平滑度等指标均得到提高,面包烘焙品质为最佳。     

Rheological properties of pasta dough during pasta extrusion: Effect of moisture and dough formulation

A study was conducted to investigate the effect of dough formulation and hydration level on the rheological properties of pasta dough during pasta extrusion. Semolina 100%, whole wheat 100%, and the following mixtures semolina-whole wheat (49:51), semolina-flaxseed flour (90:10), whole wheat-flaxseed flour (90:10), and semolina-whole wheat-flaxseed flour (39:51:10) were the formulations used for the experiments. Dough was hydrated at 30, 32, and 34% moisture content. Pasta was extruded with a capillary and a semi-commercial pasta extruder to determine the apparent viscosity of the dough during extrusion conditions and its relationship to the behavior of the dough during pasta processing. Results showed that non-traditional pasta dough behaved like a shear thinning fluid that can be described by the Power Law model. Increased hydration levels and/or presence of flaxseed flour on the dough formulation decreased the apparent viscosity of the dough, which correlated with extrusion pressure, mechanical energy, and specific mechanical energy that were required to extrude the dough in the pasta extruder. The strong correlations found between the apparent viscosity of the dough and the pasta extrusion parameters indicates the possibility of using a capillary rheometer to determine the appropriate hydration level of ingredient formulations before extruding with a pasta press.     

马来松香对木粉/HDPE复合材料流变性质的影响

用马来松香对木粉进行流动性能改善处理,与高密度聚乙烯(HDPE)熔融复合,挤出成型制备木粉/HDPE复合材料(WF-HDPE).利用傅里叶变换红外光谱(FTIR)和X-射线光电子能谱(XPS)技术,分析经马来松香改性前后木粉表面官能团的变化和元素的变化,采用旋转流变仪研究.WF-HDPE的流变行为.FrIR与XPS分析表明,马来松香分子中的酸酐基团与木粉表面的羟基发生了酯化反应,并且马来松香是以单酯的形式接枝到木粉表面,同时产生一游离羧基.WF-HDPE流变学研究表明:复合材料的复合黏度(η*)、储能模量(G′)和损耗模量(G″)随马来松香用量的增加先减小后增大最后减小,但体系的黏度和模量总体呈下降趋势,木粉经马来松香改性后复合熔体的流变性能显著改善,这不仅有利于提高复合材料的成型加工效率,而且适当的马来松香处理也能够提高复合材料的拉伸强度和弯曲强度,后者被静态力学试验结果所证实.