四倍体鸭茅产量及其构成因素的QTL定位

产量相关性状是复杂的数量性状,对鸭茅的单株产量及构成因素进行QTL分析,可提高育种中对产量性状优良基因选择的效率,同时为鸭茅遗传改良、基因克隆及分子标记辅助育种提供理论依据。以四倍体鸭茅“楷模”和“01436”为亲本杂交而成的作图群体为试验材料,于2014年对洪雅、宝兴两个不同生境下鸭茅株高、旗叶长、倒二叶长、旗叶宽、倒二叶宽、茎粗、花序长、分蘖数、单株干重等9个产量相关性状进行了表型鉴定及相关性分析。此外,在已构建的高密度鸭茅分子遗传图谱的基础上,采用MapQTL 5.0进一步对这些性状QTL定位分析。结果表明,绝大多数性状在亲本间呈显著差异且都整体表现出连续变异,符合数量性状遗传的特征;相关性分析表明,大多数产量相关性状均与干重极显著正相关,与单株干重相关性最好的依次为分蘖、株高;QTL分析发现,控制该9个农艺性状的QTL共60个,洪雅38个,宝兴22个,这些QTL分别定位于分子连锁图谱的1、2、3、4、5共5个连锁群上,单个QTL的贡献率为5.7%~24.7%,单个性状QTL个数为2~15个。其中,控制株高、花序长的QTL各12个,控制倒二叶长、茎粗的QTL各4个,控制旗叶宽、倒二叶宽的QTL各2个,控制单株干重的QTL有6个,影响分蘖的QTL为3个,与旗叶长相关的QTL最多15个。     

光质对番茄营养与风味品质的影响

以番茄为试验材料,在田间大棚设施条件下,选用白、蓝、黑、红、绿5种不同颜色的遮阳网,探讨不同光质对番茄营养与风味品质的影响。结果表明,在青熟期,黑色光质促进了总氮、蛋白氮以及非蛋白氮的积累。青熟期到转色期,白色光质的番茄有机酸总量较青熟期增加了4.57倍,蓝色和绿色光质提高了番茄的总糖和还原糖含量。从转色期到成熟期,番茄氨基酸含量大小表现为蓝色>绿色>黑色>红色>白色;黑色光质的番茄有机酸总量较转色期增加了27.8%;红色光质提高了番茄红素含量和Vc含量,降低了硝酸盐含量;白色、红色和绿色光质增加了番茄的总糖和还原糖含量。番茄主要风味物质(>30 μg/kg)为水杨酸甲酯、6-甲基-庚烯-2-酮、柠檬烯、反-2-己烯醛。红光使番茄水杨酸甲酯、6-甲基-庚烯-2-酮和己烯醛含量较白光增加了11.6%、20.2%和17.2%。在大田设施条件下,转色期到成熟期可以采用红色光质提高番茄果实营养品质和风味。     

新疆与美国早实核桃(Juglans regia L.)品种生长结实与成花特性比较

以引进的美国核桃品种‘维纳’、‘艾米格’和新疆本地品种‘温185’和‘新新2号’为试材,研究分析不同品种的植物学和生物学特性、花芽分化过程以及相关成花基因的表达。结果显示:4个品种在树体生长、枝芽发育特性、物侯期以及成花率和坐果率方面没有明显差异。在结果枝同一坐果部位形成双果、三果或以上的能力‘新新2号’明显强于‘维纳’,但‘新新2号’的果实大小和单果重都低于‘维纳’,而‘维纳’平均结果母枝上形成侧花芽的数量和坐果率高于‘新新2号’。从萌芽到开花结束直至当年侧芽发育过程中‘维纳’混合芽中的JrFT和JrLFY基因表达也高于‘新新2号’,而同时期的JrFLC基因表达则相对较低,说明‘维纳’在花芽分化和花器官形成过程中通过高表达JrFT和JrLFY基因,低表达JrFLC基因促进结果母枝上形成大量侧花芽,并利用大量侧花芽抽生结果枝坐果,形成较大的果实,使得最终产量并不低于同一个坐果部位大量着生2个或多个果实的‘新新2号’品种。     

Relevance of Osmotic and Frost Protecting Compounds for the Winter Hardiness of Autumn Sown Sugar Beet

The cultivation of autumn sown sugar beet (winter beet) is supposed to result in a marked yield increase compared with spring sown sugar beet. Although the importance of the growth stage reached before winter for the survival of autumn sown sugar beet has already been shown, it is not clear to which extent osmotic and potentially frost protecting compounds may contribute to winter hardiness. The study thus aimed to analyse the acclimatization process of sugar beet to low temperatures and to identify compounds which are important for survival of frost. Field trials with autumn sown sugar beet were conducted at eleven environments in Germany from 2009/10 to 2012/13, which were accompanied by greenhouse experiments with controlled temperature regimes. In the field trials, the survival rates after winter varied from 0 % to 99 %, but only in four environments differences between the five genotypes occurred. During acclimatization, betaine, glutamine, proline and raffinose were markedly accumulated and osmolality was enhanced. In particular betaine, amino acids and osmolality showed a positive correlation to the survival rate and were thus identified as potentially frost protecting substances for sugar beet. In contrast, raffinose and proline seem to act rather as stress indicators as they were negatively related to survival. Possible frost protecting substances were identified which can be used in breeding to improve the winter hardiness of sugar beet.     

中草药免疫活性物质对鱼类肠道菌群群落的影响研究进展

对近年来国内外有关中草药免疫活性物质对鱼类肠道菌群群落结构的影响进行了综述,旨在为开发绿色高效、营养全面的饲料提供科学的理论依据。     

Synergistic effects of soil microstructure and bacterial EPS on drying rate in emulated soil micromodels

Microbial extracellular polymeric substances (EPS) have been shown to alter soil moisture retention and to improve seedling survival and plant growth at the bulk scale. The mechanisms of EPS-mediated water retention include reversible swelling of the cross-linked polymer matrix and the promotion of an aggregated soil structure. However, the effects of EPS on water retention have never been directly observed at the pore scale. Here, emulated soil micromodels were developed to directly observe the effects of physical, chemical, and biological factors on pore-scale water retention. In this demonstration, a pseudo-2D pore structure was created to represent physical features of a fine sandy loam. Replicate micromodels were initially saturated with suspensions of different soil bacteria, and pore-scale air infiltration was directly imaged over time. External evaporativity was held constant through the use of a custom constant-humidity environmental chamber. Micromodels filled with suspensions of highly mucoid Sinorhizobium meliloti retained moisture about twice as long as physically identical micromodels filled with suspensions of non-mucoid S. meliloti. Relative drying rates in six replicate experiments ranged from 1.1 to 2.5 times slower for mucoid suspensions. Patterns of air infiltration were similar but not identical across replicates. The results suggest that pore fluid EPS and micromodel geometry act together to limit evaporation at pore throats. Advantages of the micromodel approach include direct observation of pore-scale dynamic process, and the ability to systematically replicate complex physical structures. These abilities will enable users to screen benefits from different structures and from microbial compositions, and build predictive understanding of the overall function of microbe-habitat systems.     

外源海藻糖对NaHCO3胁迫下甘草幼苗生长调节及总黄酮含量的影响

本研究以甘草无菌苗为试验材料,采用植物组织培养的方法,分析50 mmol·L^-1 NaHCO₃ 胁迫下外源海藻糖对甘草幼苗生长量、叶绿素含量、渗透调节物质含量、抗氧化保护酶活性和总黄酮含量的影响。结果表明： 50 mmol·L^-1 NaHCO₃ 胁迫显著降低了甘草幼苗的生长量、叶绿体色素含量、K⁺ 浓度、抗氧化保护酶（SOD、POD、CAT）活性和总黄酮含量,显著提高了丙二醛、脯氨酸和可溶性糖含量以及Na⁺浓度;施加15 mmol·L^-1 海藻糖可显著提高甘草幼苗的生长量,提高叶绿素含量、K⁺ 浓度和总黄酮含量,降低丙二酸含量、脯氨酸含量、可溶性糖含量和Na⁺ 浓度,并且提高抗氧化保护酶活性。因此,NaHCO₃胁迫下施加外源海藻糖对甘草幼苗生长具有良好的调节作用,可以增强甘草的抗碱能力,促进甘草幼苗生长。本研究为外源海藻糖提高甘草耐碱性和揭示其调控机制提供理论依据。     

PEG干旱胁迫对3种葱属植物种子萌发期渗透调节物质及酶活性的影响

为探明东北地区常见野生葱属植物耐旱能力,筛选野生葱属植物耐旱种质资源,本研究以野韭（Allium ramosum L.）、山韭（Allium senescens L.）和蒙古韭（Allium mongolicum Regel）3种葱属植物为材料,采用不同浓度的PEG-6000模拟干旱胁迫,分析其种子萌发期渗透调节物质及酶活性的影响,并结合主成分分析和隶属函数分析比较抗旱性。结果表明：干旱胁迫下,3种葱属植物种子萌发期相对电导率显著升高（P<0.05）,丙二醛、脯氨酸、可溶性糖、可溶性蛋白含量及超氧化物歧化酶、过氧化氢酶、过氧化物酶、多酚氧化酶活性均呈现先上升后下降的趋势。3种植物相比,山韭相对电导率最低,渗透调节物质积累量最高,酶活性变化明显。主成分分析表明,4种酶活性之间显示出强相关性。隶属函数分析得出3种植物种子的抗旱性由高到低依次为：山韭 > 野韭 > 蒙古韭。     

Dynamics of Actin Polymerization

The process of actin polymerization and depolymerization have some relation with its function,the activation of such process is compatible to its functions. The polymerization progress is divided into four steps: The first step is the activation of the monomer actin. The nucleation of actin nucleus forms in the second step which limits the polymerization speed. The elongation of the F-actin filaments happens in the following step. In the last step, a steady-state is attained, the length of the filament does not change because the polymerizing rate in the barbed end is the same with the depolymerizing rate in the pointed end. Some factors which affect the polymerizing process, such as nucleotide, actin related proteins are discussed. The aim is to know more about how to assemble the complicated system with biomacromolecule and what to function.