粪肠球菌生长曲线的测定及其对小鼠脑组织的影响

为测定致羔羊脑炎粪肠球菌（Enterococcus faecalis）的生长曲线，寻求一种快速而准确的方法测定不同生长时期粪肠球菌数量，并客观评价其毒性强弱及其对小鼠脑组织的影响，试验采用平板菌落计数法和OD-Monitor振荡比浊法（D_λ值法）测定粪肠球菌的生长曲线，探究该菌在合适时间段内的吸光值（D_{600 nm}）与平板菌落计数法测定的活菌数（CFU）的关系。用粪肠球菌感染小鼠，观察记录小鼠的死亡情况，最后采用Karber法计算粪肠球菌感染小鼠的半数致死量（LD₅₀）。用LD₅₀的剂量感染小鼠，及时采集死亡小鼠脑组织，未死亡的小鼠72 h后全部剖杀取脑组织，一部分做涂片染色，制作病理切片，观察病理变化；一部分进行培养，用于PCR方法进行细菌的回收鉴定。结果显示，用两种方法测定此株粪肠球菌的生长曲线基本一致，在2~8 h生长迅速，为对数生长期，8~14 h生长缓慢，为稳定期，14 h之后死亡数增加，进入衰亡期；对12 h粪肠球菌D_{600 nm}与CFU的关系进行探讨，成功建立回归方程：y=20.769x-1.3422，R²=0.997；其感染小鼠的LD₅₀为7.77×10¹¹个活菌。以此剂量感染小鼠，脑组织涂片染色和培养染色，均能看到革兰氏阳性球菌；PCR结果显示，均出现了大小为112 bp的条带。对脑组织进行病理学观察发现该菌可导致脑组织充血、出血、形成微血栓，脑膜充血。通过生长曲线和其D_{600 nm}与CFU关系的建立，可实时监测粪肠球菌数量，为后期更深入研究粪肠球菌穿越血脑屏障的机制奠定重要的理论基础。     

广东省养禽场肠球菌耐药性及毒力因子流行分布特征

旨在调查和分析广东省养禽场肠球菌的亚型屎肠球菌和粪肠球菌耐药性及其毒力因子流行分布特征,为控制禽源肠球菌耐药性传播、保障公共卫生安全提供理论依据。作者于2018年从广东省4个养禽场采集肠道样品493份,进行屎肠球菌和粪肠球菌的分离鉴定;采用琼脂二倍稀释法测定肠球菌的最小抑菌浓度（MIC）;PCR方法检测肠球菌的耐药基因和毒力基因。结果显示：1）共分离到125株肠球菌,其中粪肠球菌84株（鸡源66株,鸭源18株）;屎肠球菌41株,均来自鸡肠道样本。2）菌株对四环素、多西环素、红霉素几乎全部耐药,对氟苯尼考和氯霉素的耐药率高达89.60%和74.40%。屎肠球菌耐药率普遍高于粪肠球菌,而粪肠球菌对环丙沙星和利奈唑胺的耐药率高于屎肠球菌;鸭源粪肠球菌对利奈唑胺的耐药率（94%）显著高于鸡源粪肠球菌（39.4%）,屎肠球菌对利奈唑胺均敏感。从鸡分离的1株粪肠球菌对万古霉素耐药。3）耐药基因在屎肠球菌中的检出率高于粪肠球菌,鸭源分离株检出率高于鸡源。耐药基因tetL、fexA、ermB最为流行,检出率均高于90%。其次是optrA基因,检出率为73.60%,poxtA和fexB的检出率均低于20%。在3株鸭源粪肠球菌中检测出cfr基因。4）已检测的毒力基因中efaA的携带率最高,为63.04%（58/92）,其他依次为gelE（54.35%,50/92）、ace（47.83%,44/92）、asa1（44.57%,41/92）。对环丙沙星及高浓度氨基糖苷类耐药的菌株及携带cfr基因的菌株,大多携带agg、asal、gelE或ace。本研究显示养殖场禽源肠球菌耐药严重,鸭源肠球菌对利奈唑胺耐药率高,耐药基因和毒力基因流行且多样,且检测出人医临床重要抗生素耐药基因,应加强对养禽场肠球菌耐药性监测。     

Research on the Realization of Remote Controlling for Multi-output Power Supply of Communication Equipment Based on Ethernet

According to the requirements of communication power supply, such as high reliability, wide application and high availability, the authors raise a new remote control design for a multi-output power supply for communication equipment based on TCPIP protocol and embedded technology. Then the hardware design is given for the system is discussed based on Ethernet professional chip PRTL8019AS and related circuits. The firmware software design for the salve-computer based TCPIP technology, and the soft design of communieation and control for the master-computer are proposed based on Winsoek and MFC technology in detail A test machine is built to do the testing, the test results prove that the test machine works stably and well, satisfies the design rules and also provides a feasible method for the remote supervise in communication power supplier whose requirement includes remote supervise, no-people on duty and so on.     

Design of the PC/104 Bus Mode Multi-channel Analyzer

This paper expatiates on the bus structure and develop the bus mode Multi-Channel Analyzer (MCA). The nucleus of this MCA is the PC/104 embedded computer, and it introduces the bus communication to realize system and data communication. It may realize data collecting and showing in the field, because the bus mode is rapid. At first, on the hardware we introduce CMOS components, this reduces power, volume and weight. These make it adapts to use in the field; besides, on the software we adopt C and assembly language to program in order to improve conversion speed. At the same time, single-task DOS operating system is infroduced, which makes the software run more steadily, operate more simply. By means of testing on the spot it can normally work, so it suitable to work in the field.     

Realizing 3 Layers Transport Model in the Communication Between Embedded System and PC

This article puts forward a 3 Layers Model for the communication between embedded system and PC. It is based on the speciality of them and the TCP/IP model. The model defines the communicate process of embedded system to be three layers: Transport Layer, Control Layer and Application Layer. Each layer serves for its higher-up. It can keep the efficiency and credibility of the communicate process and the authors prove and analyse that in the article. the concept of the model is also suitable for Bluetooth, IrDA and other kinds of communication about embedded system.     

Context Model Based on 3D Wavelet Coefficients

Based on by typical coding schemes such as EZW,SPIHT, EBCOT,3D-IEZW,3D-SPIHT and 3D-ESCOT,a context model(3D-OWNER) of wavelet coefficients is proposed,which makes use of partial order,self-similarity between subbands of wavelet coefficients and the correlation of neighboring wavelet coefficients.Experimental results show that the model can achieve higher PSNR than 3D-ESCOT.     

变电站中的嵌入式视频监控系统的设计

嵌入式视频监控系统可实现摄像头数据的实时采集,并拥有Web服务器及网络视频服务器的功能,远程的客户端通过浏览器可实时监控远程的视频图像。本文构建了嵌入式视频监控系统的总体框架,设计了以SH4-DSP处理器SH7760为中心的嵌入式体系的硬件结构,并通过软件实现嵌入式web服务器及视频服务器。系统成功运行表明其在变电站的应用可行。     

贴边钢岔管与围岩联合承载有限元分析

以某水利水电枢纽工程为例，分别对明岔管和有初始缝隙的埋藏式钢岔管两种结构方案，进行了三维有限元计算分析，讨论了围岩性能及初始缝隙值对钢岔管应力和围岩承载比的影响，并与明岔管计算结果相比较，得出了一些有意义的结论。     

Cloning,Expression and Bioinformatics Analysis of Enterococcus faecalis from Northeast Black Bear

In order to detect Enterococcus faecalis endocarditis antigen (EfaA) of bear that was used to disclose the infected Northeast Black bear immediately, a pair of PCR primers was synthesized by EfaA gene of Enterococcus faecalis that was recorded in GenBank (accession number:U03756.1) and the target fragment was 689 bp. The PCR product was cloned by pMD19-T vector, then was transferred to Escherichia coli DH5α competent cells and the positive clones were filtered. Recombinant plasmid (pMD19-T-EfaA) was extracted. Identification of PCR and digestion, sequencing, the structure prediction of proteins were operated. The results showed that EfaA gene was cloned successfully, and the gene homology with ATCC 29212 was 100.0%. pMD19-T-EfaA was constructed successfully, structure of proteins was predicted. This study provided theoretical basis for diagnostic methods of Enterococcus faecalis and laid basis for prevention and control of Northeast Black bear disease.     

基于Linux的家用微型植物工厂

试验研究的家用微型植物工厂,具有全自动发面和生豆芽的功能,还可在室内完成种菜的全过程。植物工厂内部利用温、湿度传感器,CO2浓度探测器以及LED灯来精确控制内部的小气候环境,不受外界环境影响,确保各功能的完好实现。植物工厂提供了可以人工控制的用户接口,应用基于web的B/S(Browser/Server)和浏览器/服务器模式,引入了嵌入式SQLITE数据库,可针对不同的植物生长进行人工调控、适时的自动控制和管理。试验结果表明:家用微型植物工厂能正确显示、精确控制工厂内的环境,系统运行可靠稳定,达到了预期的设计目的,可应用于家庭生活或餐馆的小菜种植。