动态载荷下基于声发射技术的杨木破坏过程检测

利用声发射检测和力学试验相结合的方法,研究山杨木材在动态载荷下的声发射演变过程;结合木材粘弹性特点,通过声发射参数分析研究在不同受力阶段木材的声发射特点.结果表明:1)声发射信号幅值不连续,是跃迁的;材料断裂前声发射信号的幅值和能量比断裂后小,在断裂点对应声发射信号幅值和能量的局部极大值.2)随时间和载荷的变化,声发射累计撞击数和累计能量增加快慢可以体现杨木在受力条件下的完全弹性、弹性为主的弹塑性共存、塑性为主的弹塑性共存3种状态.3)声发射率和幅值参数可以预测材料纤维开始断裂进入危险期的第一"临界点"和材料大量纤维断裂进入严重危险期的第二"临界点",如果继续加载材料将会破坏断裂.     

60多年来车尔臣河流域主要水文要素特征分析

开展河流主要水文要素变化特征分析,可为不同来水情景下水资源配置（农业需水量计算、山区水库调蓄计算、水利工程规划布局、水资源优化利用等）提供理论依据。以新疆车尔臣河为例,采用Mann-Kendall趋势检验、小波分析等方法对主要水文要素变化特征进行了分析。车尔臣河径流系列变差系数（Cv）为0.34,偏差系数（Cs）为1.14,径流年际变化相对稳定;1957—2021年间径流整体呈显著增加趋势,其中1957—2003年处于上升、下降的波动状态,在2003年后径流整体呈增加趋势,且在2008年发生突变;径流过程存在 11 a和 19 a的显著主周期,在主周期内还存在 7 a和 11 a的小周期;基于距平百分率法得到丰水年来水为6.630亿m³,平水年来水量为5.319亿m³,枯水年来水量为4.820亿m³;流域降水呈现显著上升趋势,气温呈先下降后上升波动,整体呈上升趋势。研究表明,1957—2021年,在车尔臣河流域,径流年际变化相对稳定,整体呈显著增加趋势,过程存在11 a和19 a的显著主周期,降水呈波动上升趋势,气温也呈增加趋势,在未来水资源配置规划时应重点关注以上特征。     

影响反力式滚筒制动试验台检测精度的因素

针对目前国内大部分汽车检测站使用的反力式滚筒制动试验台的检测数据存在较大差异的问题。详细分析了各种相关因素对汽车制动检测性能的影响以及正确使用反力式滚筒制动试验台的方法。     

一种实用的自动排考算法

从高校考务管理工作的实际需求出发,提出了一种实用的自动排考算法.算法应用于安徽科技学院考试安排管理系统,实践表明,算法较好地满足了组织此类考试的要求.     

鸭茅重要种质DUS测试及农艺性状评价筛选

以我国主栽的32个鸭茅品种(系)为研究对象,对其开展了DUS测试,并基于农艺性状进行了综合评价筛选,以期筛选出适合我国南方及长江流域地区生长的优质鸭茅种质资源。结果表明:供试鸭茅品种(系)可根据其物候期的差异,主要分为早、中、晚熟3种类型,生育期介于230~307d。各供试鸭茅品种(系)在抗锈病、越夏率、生长速度、草产量、茎叶比、鲜干比、分蘖数等均差异明显,呈现出不同程度的群体差异,以‘滇北’、‘01472’、‘Cristobal’、‘宝兴’、‘波特’等表现较为突出。供试14个DUS性状在各鸭茅间表达程度各不相同,可用于区分供试鸭茅品种(系),并得出关于鸭茅产量、抗性及品质的供试种质综合排序,最终筛选出17份表现较为优异的鸭茅资源。     

立式无筛饲料超微粉碎机的研发及质量检测分析

介绍了我国立式无筛饲料超微粉碎机的发展,简述立式无筛饲料超微粉碎机的组成、工作原理和优越性,分析质量检测及立式无筛饲料超微粉碎机技术的发展,展望制定行业标准的预期效果。     

Soil Phosphorus Extracted by Bray 1 and Mehlich 3 Soil Tests as Affected by the Soil/Solution Ratio in Mollisols

Different relationships between soil-test methods results have been reported in several agricultural regions. Differences in the same soil-test procedure (e.g., soil/solution ratio) exist between soil-testing laboratories from different agricultural regions. Our objectives were to (1) determine the effect of soil/solution ratio on the amount of phosphorus removed by Bray 1 and Mehlich 3 methods, (2) compare the amounts of phosphorus removed by Bray 1 and Mehlich 3 in Mollisols from the Pampean region, and (3) determine whether soil/solution ratio affects the relationship between Bray 1 and Mehlich 3. Soil phosphorus availability was determined with two extractants (Bray 1 and Mehlich 3), using two soil/solution ratios (1:10 and 1:8, wt/v) in 72 soils (noncalcareous, loess-derived Molisolls) from the Pampean region. The amount of phosphorus removed was 20–24% greater when using 1:10 than 1:8 (wt/v) soil/solution ratio. This effect was significantly greater in Bray 1 than in Mehlich 3 (p = 0.04). When compared using the same soil/solution ratio, Mehlich 3 removed 4 to 8% more phosphorus than Bray 1. The soil/solution ratio used in the comparison affected the relationship between both extractants. The difference between extractants was slightly greater with a soil/solution ratio of 1:8 than of 1:10 (p = 0.03). Our results showed that even when using the same method, changes in the procedure (like soil/solution ratio) may cause different soil-test results and also differences in the relationship between two extracting solutions. Therefore, reported relationships between two methods are only valid for the soils and region where the relationship was developed and should not be extrapolated to other regions, even with similar soils.     

Application of Slicing in Component-based System Regression Testing

In component-based system regression testing, the dependence model of component-based system should be built in order to confirm the part which will be affected by modify. Since high reusability and high complexity, the existing dependence models may not be applicable to component-based systems, a hierarchical dependence model is proposed to describe component-based. Through the forward slicing of modified points in the model, the modified and affected parts can be gotten, then traverse these parts and get affected testing path, thereby regression testing examples can be chosen effectively, the efficiency of regression testing can be improred.