基于单片机的脉码传输仪设计

以单片机为核心,采用软件、硬件相结合的方法,充分利用单片机的硬件中断资源,实时响应地面的声波逻辑脉冲,分离其接收和发射逻辑。同时该仪器以地面声波逻辑为工作时序,分时采集模拟道数据、脉冲道数据及向地面传输PCM数据。该脉码传输仪既能完成PCM3506的全部功能,又能监测仪器工作环境的温度及测井套管接箍的压力。     

基于伺服控制系统的MJK6227型往复式裁板锯

通过伺服控制系统在MJK6227型往复式裁板锯上的应用,可以看出与传统的电控系统相比,该机具有较高的灵活性和准确性。便于用户实现较高的工作精度和较为快捷的工作要求。试验表明,系统能够满足该机的各种动作要求,且在工作过程中可以反馈锯片的即时动作。目前,该系统已在铣床、砂光机等数控机床控制系统设计中推广应用。     

加热光纤法同步测定土壤水热参数误差分析

土壤水热参数是研究土壤水热传输的基本物理参数。当前热脉冲探针法（HPP）可同步测定土壤水热参数,但该方法仅限于在点尺度下测定。与其具有相同理论基础的加热光纤法（SPHP-DTS）,可将测定尺度增大至田间千米尺度,但其测定精度尚未得到有效验证。为了探知SPHP-DTS法的误差,本研究进行了SPHP-DTS法与HPP法测定土壤水热参数的对比试验。结果表明,以HPP为标准,加热光纤法测定热导率的精度RMSE为0.13 W?m-1?℃-1。SPHP-DTS法测定的热导率显著高于HPP法,主要原因在于加热光纤时产生的温度效应。通过热导率法测定土壤含水率时,在热导率测定误差的影响下,SPHP-DTS法的测定精度明显低于HPP法。SPHP-DTS法测定土壤水热参数的其他误差来源包括光纤与土壤之间多个界面的接触热阻、光纤的温度敏感性、噪音干扰以及温度梯度驱动下的水分迁移。本研究可为SPHP-DTS法提升土壤水热参数测定精度提供理论参考。     

一种准零刚度被动隔振系统的非线性共振响应分析

分析了一种机构的负刚度特性和它与线性主弹簧并联后而成的隔振系统的准零刚度特性，推导了准零刚度被动隔振系统的主谐波共振、亚谐波共振和超谐波共振的幅频特性表达式.结果表明，机构的负刚度区域随弹簧的初始变形与杆长的比值增大而变宽；隔振系统的准零刚度区域随主弹簧的刚度与机构中的弹簧总刚度的比值以及机构中的弹簧初始变形与杆长的比值增大而变宽；经比较发现，本文推得的被动隔振系统的同一种谐波共振幅频特性与杜芬方程的幅频特性均存在较大偏差.因此，对于这类被动隔振系统的运动微分方程，若以位移激励的幅值与激励频率平方的乘积代替单位质量的激励力幅值按杜芬方程的解来处理谐波共振问题将会带来较大误差.     

支管射流三通结构优化与试验

为了提高支管射流三通水力性能,改善滴灌的灌水均匀性,基于CFX数值模拟技术,对进口宽度为15 mm的支管射流三通进行结构优化.选取位差、劈距、劈尖半径和侧壁倾角为影响因素,通过四因素三水平正交设计了9组模型,边界条件设定为进口压力100 kPa.选取支管射流三通出口设计流量为评价标准,支管射流三通最优结构尺寸为位差5.5 mm、劈距113 mm、劈尖半径13 mm、侧壁倾角10°.此结构尺寸参数下的支管射流三通水力性能试验结果表明:在进口水压为100 kPa时,支管射流三通脉冲频率为148次/min,水头压力振幅为37.9 kPa,水头压力损失为16.7 kPa,出口流量为0.698 L/s;支管射流三通所接滴灌带长度为60 m时,与普通支管三通相比,支管射流三通的灌水均匀系数提高了2.78%,流量偏差率降低了4.72%.该研究可为射流技术在脉冲滴灌系统的研究、开发与应用提供理论依据.     

基于分段波形的信号瞬时频率计算方法

针对局部均值分解（Local Mean Decomposition，LMD）中乘积函数（Product Function，PF）分量的瞬时频率计算问题，引入了一种新的信号瞬时频率计算方法.该方法基于分段波形，先将信号分成若干个全波段（full wave），然后以一组递增的反正弦函数定义每个全波段的瞬时相位，进而得到信号的瞬时频率.由该方法得到的瞬时频率理论上是正的、稳定的并且能够确保信号局部特征信息的完整.应用该方法计算了仿真信号和实际齿轮故障振动信号的瞬时频率，并与其他方法求得的瞬时频率进行了对比.结果表明，本文方法非常适合求取信号的瞬时频率.     

Assessment of pulse co-oximetry technology after in vivo adjustment in anaesthetized dogs

ObjectiveTo compare values of haemoglobin concentration (SpHb), arterial haemoglobin saturation (SpO₂) and calculated arterial oxygen content (SpOC), measured noninvasively with a pulse co-oximeter before and after in vivo adjustment (via calibration of the device using a measured haemoglobin concentration) with those measured invasively using a spectrophotometric-based blood gas analyser in anaesthetized dogs.Study designProspective observational clinical study.AnimalsA group of 39 adult dogs.MethodsIn all dogs after standard instrumentation, the dorsal metatarsal artery was catheterised for blood sampling, and a pulse co-oximeter probe was applied to the tongue for noninvasive measurements. Paired data for SpHb, SpO₂ and SpOC from the pulse co-oximeter and haemoglobin arterial oxygen saturation (SaO₂) and arterial oxygen content (CaO₂) from the blood gas analyser were obtained before and after in vivo adjustment. Bland–Altman analysis for repeated measurements was used to evaluate the bias, precision and agreement between the pulse co-oximeter and the blood gas analyser. Data are presented as mean differences and 95% limits of agreement (LoA).ResultsA total of 39 data pairs were obtained before in vivo adjustment. The mean invasively measured haemoglobin–SpHb difference was –2.7 g dL^?1 with LoA of –4.9 to –0.5 g dL^?1. After in vivo adjustment, 104 data pairs were obtained. The mean invasively measured haemoglobin–SpHb difference was –0.2 g dL^?1 with LoA of –1.1 to 0.6 g dL^?1. The mean SaO₂–SpO₂ difference was 0.86% with LoA of –0.8% to 2.5% and that between CaO₂–SpOC was 0.66 mL dL^–1 with LoA of –2.59 to 3.91 mL dL^–1.ConclusionsBefore in vivo adjustment, pulse co-oximeter derived values overestimated the spectrophotometric-based blood gas analyser haemoglobin and CaO₂ values. After in vivo adjustment, the accuracy, precision and LoA markedly improved. Therefore, in vivo adjustment is recommended when using this device to monitor SpHb in anaesthetised dogs.     

DYNAMIC ANALYSIS OF SPINDLE

In this paper, taking a D1201 spindle as an example, we discuss the dynamic analysis of spindle by using the theory of the complex model, we also analyse the factors which effect the dynamic characterics of spindle and give results which arc reference value to improving the structure of spindle,     

On Determinative Parameters of SDOF Systems in Elasto- plastic Earthquake Response

Parameters dominating elasto- plastic earthquake response of SDOF systems,relation between ground motion amplitude and elasto- plastic response of SDOF systems are presented in this paper.     

A PRACTICAL PWM CONTROL METHOD OF CURRENT SOURCE GTR INVERTER

According to the principle that the orbit of stator current vector in complerplane should be as close to a circle as possible, the PWM control pattern is derived and determined. The control method is realized by using a micro-computer.