长期施肥条件下菜田—蔬菜生态系统变化的研究( Ⅳ) 蔬菜生态系统的变化

 以2002 年设施番茄栽培为代表计算其N、P、K投入量与携出量之间的表观平衡状态, 其结果基本上和14.5 年后的土壤实测值与设施栽培本底值之间纵向比较的增长关系一致, 前者只能说明系统养分变化的趋势, 后者才是实际的养分盈亏状态, 养分盈亏主要取决于有机肥的施用与养分元素的供给。5个代表性处理模拟了蔬菜施肥的不同现状, 从土壤肥力及产量等方面的变化真实反映出各自的系统变化及发展趋势, 在本试验条件下以ANK施肥下的系统最优。对有机肥施用、化学肥料的配施以及测土施肥等问题进行了探讨。     

对两个材料力学问题的探讨

在材料力学中,对铸铁试件的轴向压缩破坏一般都认为破坏断面与杆件横截面成45°角;在材料的应力分析上,只对平面应力状态进行研究,对三角形单元的应力研究轻少。为此分别采用实验方法和分析法,对上述两个问题进行探讨。其实验结果是:铸铁试件的压缩破坏一般在55°左右,考虑内摩擦力的影响后,得到了很好的理论解释;而对三角形单元的应力分析,用应力圆法求解简单方便。对这两个问题的研究,将有助于材料力学的应用与发展。     

远东杉苞蚧发生规律与防治的初步研究

通过2004～2005年对远东杉苞蚧生活史的观察,证明该虫在哈尔滨市1年发生1代,以2龄若虫在针叶表面越冬。越冬若虫3月下旬开始活动,5月中下旬为雌雄交配盛期,6月下旬为初孵若虫孵化盛期,8月末1龄若虫开始蜕皮变为2龄若虫。药剂防治试验的研究表明,若虫初孵阶段是药剂防治的最佳时期,并筛选出几种防治效果较好的药剂。     

Reflections on the influence of a synthesis of circle‐hook evidence on the angling community and conservation policy and practice

1. Understanding how different forms of environmental evidence inform the actions of different stakeholders is useful to improve how we share knowledge with knowledge users. Reflections on a literature review that we published in 2004 on circle hooks as a tool for fish conservation in the recreational fishing sector identified a number of ways in which that synthesis was influential.
2. The article has had direct influence on policy and regulations in a number of countries, but there were even more examples of where the article has been used to influence voluntary guidelines. The article also contributed to formally defining circle hooks, which was necessary from a regulatory and enforcement perspective.
3. The recreational fishing community has also embraced the work, with numerous angling articles based on the literature review appearing in the media and with some angler organizations pushing for the adoption of circle hooks. The fishing tackle industry has also responded with evidence that circle hooks are now more widely available in stores with more hook design options to suit diverse recreational fisheries. In addition, the influence of the article has extended beyond the recreational sector to commercial fishery issues that span several taxa. The research agenda from the article helped to direct research for more than a decade and has since been updated.
4. Overall, this review was timely in that it provided various knowledge users with credible information synthesized in a thoughtful manner at a time when there was interest and need in exploring circle hooks as a tool to enhance the conservation of angled fish. Although this was not a systematic review, it still served as a form of evidence synthesis that gave diverse knowledge users information to guide them in their decisions.

     

Are circle hooks effective in reducing incidental captures of loggerhead sea turtles in a Mediterranean longline fishery?

• 1. A known fishing hot spot for loggerhead sea turtles (Caretta caretta) in the Mediterranean Sea is in the waters of the Strait of Sicily where interactions with fish hooks and branchlines are believed to be a major cause of mortality for sea turtles.
• 2. Hooks with different shapes but a similar gape width (circle hook size 16/0 vs J hook size 2) were tested in order to determine the potential effectiveness of the hook design to both reduce sea turtle capture as well as to maintain acceptable levels of target species capture rates in a shallow‐set longline swordfish fishery in the Mediterranean.
• 3. Seven experimental fishing trips, 30 000 hooks total, were conducted on a single commercial fishing vessel (18 m in length) in the Strait of Sicily during the months of July through October over a period of three years from 2005 to 2007. Circle and J hooks were alternated along the mainline.
• 4. A total of 26 sea turtles were hooked, all immature‐size Caretta caretta. Turtles were caught at a statistically greater frequency on J hooks than on circle hooks. The capture rate, weight, and upper jaw fork length of the target species were not significantly different between the two types of hooks employed.
• 5. Five sea turtles swallowed the hook and in all such cases these were J type. Circle hooks tended to be located externally and were more easily detected by fishermen, and could be removed with the correct dehooking action before returning the turtle to the sea.
• 6. These findings suggest that 16/0 circle hooks can effectively reduce the incidental capture of immature loggerhead sea turtles in a Mediterranean swordfish longline fishery without affecting the catch size of the target species.

Copyright © 2009 John Wiley & Sons, Ltd.     

虎掌菌酶解提取物抑菌试验研究

采用木瓜蛋白酶、纤维素酶对虎掌菌进行酶解提取,并检测提取物对大肠杆菌、金黄色葡萄球菌、酵母菌、青霉菌和黑曲霉的抑菌效果。结果表明,不同提取方法所得粗提物都有不同程度的抑菌效果,提取液对黑曲霉和青霉菌的抑菌效果最明显,对酵母菌抑菌效果最不明显。     

采用K均值聚类和环形结构的狭叶锦鸡儿木质部提取算法

针对木质部交互统计误差大、效率低、重现性差、劳动强度高和传统图像处理算法精度不理想等问题,该文以狭叶锦鸡儿木质部切片图像为研究对象,根据木质部特点提出基于K均值聚类算法和环形结构提取算法相结合,实现木质部准确提取的方法。首先通过动态巴特沃斯同态滤波法对30幅供试图像进行光照不均校正,然后采用K均值聚类法对光照补偿后图像初分割,最后采用环形结构提取算法实现木质部提取计数。试验结果表明:采用K均值聚类算法对光照补偿后的木质部图像初分割分割误差R(section error, R)、过分割误差OR(over-segmentation error, OR)和欠分割误差UR(under-segmentation error, UR)均值分别为5.15%、1.48%和6.46%,优于未光照补偿和3R-G-B算法;该文提出的环形结构提取算法对初分割后木质部图像检测的平均相对误差为2.26%,比分水岭法低11.69个百分点,比凹点匹配法低4.93个百分点。从速度上看,该算法平均耗时3.17 s,比分水岭法快1.40 s,比凹点匹配法快4.88 s。该算法检测的均方根误差RMSE(root mean squared error, RMSE)为0.52%,约相当于分水岭法的1/3,约相当于凹点匹配法的1/2,该算法优于其他2种分割算法;在图像结构复杂、光照不均匀、内部分布不均等缺陷条件下,该文算法也能很好地实现木质部的分割和提取。该方法不仅能对狭叶锦鸡儿木质部自动分割和提取,也可为其他植物木质部分割提取提供参考。     

权重约束AdaBoost鱼眼识别及改进Hough圆变换瞳孔智能测量

针对传统鱼眼瞳孔直径测量方法耗时、耗力,且数据主观性强的问题,该文提出基于权重约束AdaBoost和改进Hough圆变换的鱼眼瞳孔直径智能测量方法。首先,利用工业相机采集实验板上的鱼图像,从正负鱼眼图像样本中训练出基于权重约束AdaBoost算法的鱼眼分类器;然后,采用该分类器对试验图像进行检测,将检测到的鱼眼局部图从整体图中分离出来;最后,采用改进的Hough圆变换检测出鱼眼的瞳孔,并计算得到瞳孔直径。对100条金鲳鱼进行试验,鱼眼分类精度达97.1%,瞳孔正确检测率达94.2%,相比改进前分别提升了1.7个百分点和10.5个百分点,与人工测量瞳孔直径值的平均偏差为6.5%,比改进前低了5.9个百分点,总的平均测量时间为324.371 ms,比改进前减少了10.707 ms。试验证明:该文提出的方法能够精确、实时、自动地测量出鱼眼瞳孔的直径,有效避免了传统测量方式的复杂性和测量数据的主观性,可为鱼体生长状况评估、良种选育提供重要参考。     

活动导叶分布圆直径对混流式水轮机水力性能的影响

对于混流式水轮机,活动导叶与固定导叶以及转轮的相对位置直接影响导水机构和转轮内部流动,对水轮机安全、稳定、高效运行起到重要作用。采用商业软件ANSYS CFX 16. 0对某电站水轮机模型机全流道进行三维数值模拟计算,提出了5种活动导叶分布圆直径方案,分析不同方案下水轮机的外部能量特性与内部流场,寻找活动导叶安放的最佳位置。结果表明:适当增大活动导叶分布圆直径,可以有效改善叶片吸力面的低压区,降低活动导叶流域内水流的最大速度,改善转轮进口水流角,同时减小导水机构与转轮的水力损失。小流量工况下,D_0/D_1增大0. 031,水轮机效率提高了5. 28个百分点;设计工况与大流量工况下,活动导叶分布圆的变化对水轮机效率的影响相对于小流量工况较小,最高效率与最低效率的差值分别为0. 17%与0. 48%。因此,在一定范围内改变活动导叶的分布圆直径具有可实施性,对水轮机的优化设计有一定参考价值。