草地类型梯度分析

紫泥泉地区位于天山北坡低山带，具有代表性的冬春秋放牧场。本文应用数量分类（ＴＷＩＮＳＰＡＮ）、排序（ＤＣＡ）和回归分析方法研究了草地类型的分类及其分布的梯度规律。研究结果表明：该地区的草地类型按传统分类划分出１８个型，ＴＷＩＮＳＰＡＮ分类结合ＤＣＡ排序归纳出８个型，其中６个型为地带性草地类型，２个型为非地带性草池类型；地带性草地类型沿水热梯度分布，非地带性草地类型沿质地梯度分布。     

Performance of DSSAT-Nwheat across a wide range of current and future growing conditions

Crop models are widely used in agricultural impact studies. However, many studies have reported large uncertainties from single-model-based simulation analyses, suggesting the need for multi-model simulation capabilities. In this study, the APSIM-Nwheat model was integrated into the Decision Support System for Agro-technology (DSSAT), which already includes two wheat models, to create multi-model simulation capabilities for wheat cropping systems analysis. The new model in DSSAT (DSSAT-Nwheat) was evaluated using more than 1000 observations from field experiments of 65 treatments, which included a wide range of nitrogen fertilizer applications, water supply (irrigation and rainout shelter), planting dates, elevated atmospheric CO₂ concentrations, temperature variations, cultivars, and soil types in diverse climatic regions that represented the main wheat growing areas of the world.DSSAT-Nwheat reproduced the observed grain yields well with an overall root mean square deviation (RMSD) of 0.89 t/ha (13%). Nitrogen applications, water supply, and planting dates had large effects on observed biomass and grain yields, and the model reproduced these crop responses well. Crop total biomass and nitrogen uptake were reproduced well despite relatively poor simulations of observed leaf area measurements during the growing season. The low sensitivity of biomass simulations to poor simulations of leaf area index (LAI) were due to little changes in intercepted solar radiation at LAI >3 and water and nitrogen stress often limiting photosynthesis and growth rather than light interception at low LAI.The responses of DSSAT-Nwheat to temperature variations and elevated atmospheric CO₂ concentrations were close to observed responses. When compared with the two other DSSAT-wheat models (CERES and CROPSIM), these responses were similar, except for the responses to hot environments, due to different approaches in modeling heat stress effects.The comprehensive evaluation of the DSSAT-Nwheat model with field measurements, including a comparison with two other DSSAT-wheat models, created a multi-model simulation platform that allows the quantification of model uncertainties in wheat impact assessments.     

温度对住宅区气体污染物扩散的影响

温度在气体污染物扩散的过程中起一定的作用。在现实生活中,由于日晒和地表辐射的存在,使得地面、建筑物外表面都与空气存在一定的温差。温差的存在会改变地表及壁面附近的流场,从而对住宅区污染物的扩散产生影响。利用理论推导对热力因素及扩散因素的关系进行了研究,并且与数值模拟的试验结果进行比较。结果发现理论推导与试验结果整体趋势相一致。这表明在与无温差情况相比较,温差存在时,地表及壁面附近流场更加紊乱;温差与气体污染物的扩散具有正相关性,对住宅区污染物的稀释起积极作用。     

森林对降水的影响概述

森林能否增加降水,这是植树造林、美化环境等工作中必然要考虑的问题。文章总结了国内外相关文献,就森林对降水的影响做了阐述。综合现有研究结果来看,森林对降水有无影响目前还没有普遍性的结论;对于局地森林对降水的影响应持保守态度,既不能说"有",也不能说"无"。明确的结论必须结合当地地形、天气、气候条件做具体的研究分析后才能得出,这样的结论才更科学,更具指导意义。因此关于宁夏植树造林是否对宁夏的区域气候产生影响,以及有什么样的影响,目前还不清楚。另外一个主要问题就是森林的尺度,即多大面积的森林才会对区域降水产生影响,因为如果森林的面积很有限,对区域降水的影响是否也很有限等等,这些问题都需要进一步深入研究和探讨。     

Numerical Simulation for B900FD-1 Bulletproof Armor Plate Against Penetration

ANSYS/LS-DYNA is used to simulate the penetration process of B900FD - 1 bulletproof armor plate, Comparisons and analysis were made between numerical simulation and experiment results. The numerical simulations shows that the Johnson-Cook constitutive model could simulate the physical and mechanical behaviors of ductile materials under shock-loaded. The ultimate-thickness of B9OOFD-1 bulletproof armor plate under 500m/s impact velocity is analyzed by more numerical simulations.     

切线泵流动特征的整流场数值模拟

对单级切线泵在设计工况进行了定常流动数值模拟，分析了叶轮流道及蜗壳内的液体流动情况。结果表明，切线泵内流场非常复杂，叶轮进口有明显冲击，叶轮各流道的速度、压力差异很大，环形蜗壳内流动呈现旋涡推进特征，上、下游流动有强烈的相互作用，整机流场不具有对称性；环形蜗壳的几何结构以及流场上、下游的相互作用是导致整机流场非对称特性的主要原因。计算结果为进一步改进结构、提高性能、减小水力损失提供了理论依据。     

泵站竖井进水流道数值模拟与装置特性试验

采用雷诺平均纳维—斯托克斯方程(RANS)和标准kε湍流模型,运用SIMPLEC算法,对椭圆型线前置竖井贯流进水流道内的流动进行了三维数值计算,揭示了竖井进水流道内流场、特征断面的速度分布及水力损失规律。对椭圆型线竖井进水流道与出水流道匹配组成的模型泵装置进行动力特性试验,得出了4种叶片角度下的泵装置特性曲线。研究结果表明:采用椭圆型线设计的竖井进水流道合理;大型低扬程泵站采用卧式竖井贯流结构,泵装置效率较高。     

车用493型柴油机冷却问题初探——机体冷却水流动CFD模拟

车用493型柴油机在我国主要是轻卡的配套动力,量大面广。为了在提高升功率的同时满足国家排放要求,很多研究工作主要着重于强化结构件、改进气道及工作过程、提高供给系统的喷油压力等,在冷却方面着力不够。实际上冷却不均衡,热应力集中同样会造成机体变形,导致颗粒物排放上升。冷却效果的好坏又在很大程度上取决于冷却水套内冷却介质流动以及分布的情况。本文从冷却分析入手,利用CFD商用流体软件STAR-CD对车用493型柴油机的冷却系统中的机体内冷却水的流动进行了三维数值模拟,给出冷却水套内冷却介质的流动场,分析它对换热的影响。     

互插式连栋温室风压分布模拟分析

以CFD理论为基础,建立了互插式连栋温室周围空气绕流的数学模型,设定了流体的边界条件,运用Fluent软件对互插式连栋温室的风压分布进行模拟分析。模拟结果表明,风力对温室作用主要是向上的升力;风压系数沿温室跨度方向分布的数值模拟结果与风洞试验结果基本吻合;上风向和下风向风压系数沿温室高度方向呈二次曲线分布,相关系数分别为0.975和0.990;最后将模拟得到的风压系数转换成相应的风载体型系数,为结构优化设计提供参考。     

The River Wadu role play — ten years experience

This paper describes a role playing planning exercise that has been used for training agriculturists, engineers and agricultural economists for more than ten years. It sets out the objectives and key features of the exercise and the experience that has been gained in its use. The exercise has been found to successfully test and integrate subject matter expertise acquired from formal teaching. It also highlights the multiple and often conflicting objectives of irrigation planning, and the need for full evaluation of alternatives and sound technical judgements under conditions of inadequate data and time pressure. The exercise is also successful in developing professional personal skills such as group working, interviewing and presentation, and is recommended as an effective training aid.