5种生物制剂对马铃薯种薯萌芽、极端天气下植株生长和产量性状的影响

旨在满足马铃薯生产中茬口衔接、机械化生产技术应用、不利气候下稳产等对马铃薯出苗早、齐、壮的需求,以‘费乌瑞它’为供试品种,用基于有益活菌或工程菌提取物的5种生物制剂进行种薯处理,对多重性状进行了对比分析。5种生物制剂较常规化学制剂,均能够不同程度地促进种薯萌芽和芽根同生,出苗期提前2~7天,播种后49天的出苗率提高3.33%~17.78%。其中,表现最好的为酵母核苷酸衍生物和VDAL,种薯萌发和生根均显著高于对照。霜冻后,生物剂拌种处理在恢复前期促进植株生长,由此促进恢复后期的块茎发育,较常规化学处理增产8.39%~24.03%,体现了不同程度的保产效果。多马道黑、酵母核苷酸衍生物、根肽和VDAL体现出较好的保产效果,可作为种薯处理剂投入马铃薯生产。     

Influence of the Indoleacetic Acid-Lysine Synthetase Gene (iaaL) of Pseudomonas syringae subsp. savastanoi on Yield Attributes of Potatoes

The iaaL gene of Pseudomonas syringae subsp. savastanoi encodes an indoleacetic acid-lysine synthetase which conjugates free indoleacetic acid (IAA) with lysine. lAA-lys is biologically less active than free IAA. The iaaL coding region was expressed under the control of the cauliflower mosaic virus 35S promoter and transgenic potato plants were produced (Spena et al. 1991). 35S iaaL potato plants are characterized by increased internodal length and epinastic bending of older leaves. In three greenhouse experiments with plants grown in pots of different size and in two growth chamber experiments tuber number increased in iaaL transgenic plants compared to untransformed and vector-transformed controls of the same genotype. The increase in tuber numbers observed under controlled conditions was reflected in tuber yield which increased in the pot grown transgenics.     

Restoration of tuber production by exposure to unshaded daylight in Eleocharis kuroguwai Ohwi shaded during the early tuber formation period

The loss of final tuber weight of Eleocharis kuroguwai Ohwi by shading during the early tuber formation period (TFP) is overcome by exposure to unshaded daylight thereafter (late TFP). In the present study, the growth parameters that contribute to the dry matter increase (DMI) per day of tubers in the late TFP were examined. DMI of the tuber during the late TFP was determined by that of the whole plant and the ratio of the DMI of the tuber to that of the whole plant during this period. The ratio of the DMI of the tuber to that of the whole plant during the late TFP was significantly correlated with the DMI of the whole plant during the first 14 days of the late TFP. During the late TFP after the exposure to unshaded daylight, DMI of the whole plant correlated with the surface area of the stem (SAS) and net assimilation ratio (NAR), and the SAS correlated with the stem dry weight (DW) and specific stem-surface area (SSA). SSA negatively influenced NAR, but NAR was increased by unshading. During the late TFP after shading, the effect of the decrease of the stem DW due to shading on the DMI of the whole plant was mitigated by the large SAS and high NAR. These results indicate that the growth parameters that contribute to the DMI of tuber during the late TFP after exposure to unshaded daylight are SAS and NAR just after unshading, and SSA during this period.     

不同产量潜力甘薯光合产物的生产、运转与块根产量的关系

选取中国主栽的食用型甘薯品种龙薯9号、红香蕉、泰中6号、苏薯8号、遗字138和北京553进行大田试验,研究不同产量潜力甘薯品种光合产物的生产、运转及其与块根产量的关系。结果表明,高产品种整个生育期干物质积累快,光合产物向块根输送多,同化物在块根中的分配率较高,而且高产品种的标记叶合成的光合产物能够较多地运出。因此,叶片光合作用形成的光合产物能够及时地往外运输,是高产甘薯品种高产的重要保证。高产品种具有较高的经济系数。     

K步稳定的鞋印花纹图像自动聚类

目的 鞋印是刑事侦查的重要物证之一,如何对积累的大量鞋印花纹图像进行自动归类管理是刑事技术迫切需要解决的问题之一。与其他类图像不同,鞋印花纹图像具有种类多但数目未知、同类花纹分布不均匀且同类花纹数目少的特点。基于鞋印花纹图像的这些特点,用目前典型的聚类算法对鞋印花纹图像集进行聚类,并不能取得很好的效果。在对鞋印花纹图像进行分析的基础上,提出一种K步稳定的鞋印花纹图像自动聚类算法。方法 对已标记的鞋印花纹图像进行统计发现,各类鞋印花纹之间在特征空间上存在互不相交的区域(本文称为隔离带)。算法的核心思想是寻找各类鞋印花纹之间的隔离带,来将各类分开。过程为:以单调递增或递减的方式调整特征空间中判定两点为一类的阈值,得到数据集的多次划分;若在连续K次划分的过程中,某一类的成员不发生变化,则说明这K次调整是在隔离带中进行的,即聚出一类,并从数据集中删除已标记的数据;选择下一个阈值对剩余的数据集进行划分,输出K步不变的类;依此类推,直到剩余数据集为空,聚类完成。结果 在两类公开测试数据集和实际鞋印花纹数据集上进行实验,本文算法的主要性能指标都超过典型算法,其中在包含5792枚实际鞋印花纹数据集上的聚类准确率和F-Measure值分别达到了99.68%和95.99%。结论 针对鞋印花纹图像特点,提出了一种通过寻找各类之间的隔离带进行自动聚类的算法,并在实际应用中取得了很好的效果。且算法性能受参数的变化以及类的形状影响较小。本文算法同样适用于具有类似特点的其他数据集的自动聚类。     

几种修剪树型对'珍珠'番石榴开花坐果及产量的影响

选用4年生'珍珠'番石榴为试脸材料,采用开心形、圆头形、平头形树型结构,以果树生产中采用的自然圆形树型结构为对照,研究4种树型修剪方法对'珍珠'番石榴新梢数、花蕾数、开花结果数及果实产量的影响.试验结果表明,'珍珠'番石榴树型圆头形、开心形促进开花坐果较好,圆头形有利于提高产量.     

前桥摆转转向式四驱底盘结构形状指数的优化

前桥摆转转向式四驱底盘可直接转入下一畦作业,提高了小地块工作行程率,在地头宽度小于等于1个作业宽度时,更有利于机耕过程中的转向操作。为此,通过ADAMS软件仿真,以最小地头宽度为目标对底盘结构参数进行了优化。仿真结果表明,底盘在作业过程中从一畦进入地头直接转入相邻的下一畦时,后内侧轮基本上不吃入上一畦,最小地头宽度与长宽比成反比。在底盘转向时行走轮不干涉后悬挂农具的前提下,底盘最小的理论长宽比应为0.5:1。但由于底盘长宽比受行走轮直径、轮宽及重心的影响,底盘的合理长宽比值范围需趋近于理论长宽比。当机具作业宽幅大于等于机具轮宽时,可直接做倒U形转向;否则采用"4"和歪梨形组合掉头转向,实现地头宽度等于1个作业幅宽的转向。     

基于标记的极半径极值红枣形状识别方法

形状是分级的最重要参数之一,本文采用标记法对红枣形状进行了识别。通过图像预处理获取红枣二值图像,通过边界追踪获取目标边界笛卡尔坐标,并将其转化为极坐标,对目标图像进行缩放旋转使均值圆成为基线,切割的4部分边界曲线能完整表达。对边界曲线进行多项式拟合,获取极值点坐标,将其映射回被拟合曲线上,获取对应极值点坐标。若两极小极半径差值大于阈值,则红枣畸形;若两极大极半径附近区域极半径过渡平缓,判红枣为规整,否则为较规整。取53粒红枣进行检测,其中16粒畸形,17粒较规整,20粒规整。检测结果表明:畸形枣识别准确率达100%,较规整枣的识别准确率94%,规整枣识别准确率95%,可基本满足红枣分级系统精度的要求。