水平连续铸钢凝固过程数值模拟

本文在分析水平连铸传热特征的基础上，给出了一维情况下，计算结晶器出口处铸坯凝固层厚度的解析式，建立了计及轴向传热的连续坯凝固模拟模型。进行了连续坯二维传热的凝固数值模拟，其模拟结果与实验结果吻合较好，具有普遍应用价值。     

姜片虫虫体抗原氨基酸的测定

本文报道4种方法制备姜片虫虫体抗原,进行氨基酸组成的测定。其氨基酸总量(mg/100ml)结果显示:Ag-F1:608.50;Ag-F2:645.80;Ag-F3:357.14;Ag-F4:501.40;以 Ag-F3总量为最低,但值得重视的是 Ag-F3的丙氨酸(8.34),组氨酸(8.60),甘氨酸(11.00);苏氨酸(12.00),均显著降低。而 Ag-F4的组氨酸(4.80)为17种氨基酸含量最低者。其原因有待探讨。     

实时混合对抗蠕虫的建模和分析

传统的防病毒技术难以抵御蠕虫的传播，为此本文提出实时混合对抗技术，该技术在被对抗蠕虫感染的主机与易感染主机数量相等时转换对抗策略，并建立实时混合对抗蠕虫的传播模型.最后，通过仿真实验从对抗有效性、资源消耗和应对突发事件能力三个方面验证实时混合对抗技术的性能.理论分析和实验结果表明，实时混合对抗技术能更好地满足对抗有效性和低资源消耗要求，并能应对突发事件.     

Surgical treatment of a complicated distal tibia epiphyseal Salter–Harris type I fracture in a yearling

This article describes the management of a complicated distal epiphyseal Salter–Harris type I fracture of the left tibia in a yearling horse. Closed reduction and internal fixation was attempted in the first surgery using tension band wires. Due to fracture instability 2 weeks after surgery, a full-limb transfixation pin cast was applied to the tibia and maintained for 7 weeks to prevent further fracture displacement and to achieve axial alignment. The full-limb cast was maintained for a total of 12 weeks, including the time with the transfixation pin cast. Cast sores and tendon laxity resolved without further complications. Ten months after the first surgery, the fracture had radiographically healed, and the horse was sound at the walk and trot in a straight line.     

THEORETICAL INVESTIGATION AND PARAMETER OPTIMIZATION ON ROLLING CONE ENVELOPING HOURGLASS WORM GEARING

In this paper, a new high - strength worm gearing, named'rolling cone enveloping hourglass worm gearing' is proposed. With such a new type of worm gearing, the motion form between meshing tooth surfaces is changed in nature. A systematic theoretical study. a lot of numerical calculations and parameter analyses have been done. Based on these analyses,the optimum design of worm gearing is obtained. It is shown that this worm gearing possesses the virtues of high efficiency, large load capacity, long life -span and easy meanufacture.     

白口铸铁机械性能研究及在农机制造中的应用(I)

为了提高白口铸铁的冲击韧性等机械性能,扩大其在农机具上的应用范围,采用BZ变质剂对白口铸铁进行变质浇铸,并研究了变质剂对白口铸铁中碳化物的断网效果。试验结果表明,变质剂对于含碳量在3.2%以下、含铬量在12%以下的白口铸铁具有较好的断网效果。     

低比转速离心泵塑料叶轮设计

以一台低比转速离心泵铸铁叶轮水力模型为原型,将其材质替换为塑料.考虑泵效率提升和注塑工艺可行性对叶轮几何参数进行修改:减小叶轮外径,增加叶轮出口宽度;考虑塑料结构工艺对叶轮结构进行调整:后盖板外侧设置加强筋,轮毂处加铜嵌件,盖板与叶片结合处添加定位孔销和焊接用导熔线。将塑料叶轮和铸铁叶轮安装在同一泵体进行对比测试。测试结果表明:塑料叶轮设计工况点泵的效率由56%提高到60%,增加了4%,既达到国家节能效率指标,又为用户节省了用电费用。     

灰口铸铁电弧热焊法补焊工艺的研究

文章分析了灰口铸铁的焊接性和常用的焊接方法,阐述了电弧热焊法对灰口铸铁进行补焊时的焊接工艺。     

稻田耕作方式和施氮水平对抛栽水稻群体质量及产量的影响

比较了4个施氮水平下免耕抛栽水稻和常耕抛栽水稻的群体质量及产量。结果表明,在127.5~193.0 kg/hm2施氮水平内,结实率随施氮水平的提高而降低,穗数、穗前干物质生产量、穗后干物质生产量、总干物质生产量、茎叶干物质表观输出量和表观输出率、植株高度、单茎重、粒叶比和根系活力随氮肥施用量的增加而增加,产量随施氮水平的提高而增加。1 9 3.0kg/hm2施氮处理的产量显著高于127.5 kg/hm2处理的。常耕抛栽水稻的有效穗数和粒叶比高于免耕抛栽水稻,但免耕水稻的干物质生产量、茎叶干物质表观输出量、茎叶干物质表观输出率、植株高度、单茎重、根系活力和颖花茎流量比常耕水稻的高,免耕抛栽水稻的群体质量略优于常耕抛栽水稻的。免耕抛栽水稻比常耕抛栽水稻增产2.10%,但差异不显著。