Acoustic evaluation of the vertical distribution of dwarf ayu Plecoglossus altivelis altivelis in Lake Biwa

SUMMARY: The vertical distribution of dwarf ayu Plecoglossus altivelis altivelis in the pelagic waters of Lake Biwa was evaluated from June to September in 1995–97 from eight acoustic surveys using a quantitative echosounder. In each survey, echoes from a depth range of 3 m to the sea bottom were collected at a station every 2.7 s for 24 h together with measurements of vertical profiles of water temperature and chlorophyll-a. The ayu's echoes were identified using an underwater video camera. The ayu were observed near the maximum chlorophyll-a depth and above the thermocline. Their density was highest at depths of 4–11 m with 2–4 individuals/m ³ and was almost zero below 20 m. Echo signs were recorded as having a frequent duration of more than 1 h at night, whereas were of a shorter duration in the day. The fish stay in the epilimnion during the day without any clear vertical migration, but are distributed more uniformly at night. The advantages of remaining in the epilimnion are discussed in terms of food availability and predator avoidance.     

一种准零刚度被动隔振系统的非线性共振响应分析

分析了一种机构的负刚度特性和它与线性主弹簧并联后而成的隔振系统的准零刚度特性，推导了准零刚度被动隔振系统的主谐波共振、亚谐波共振和超谐波共振的幅频特性表达式.结果表明，机构的负刚度区域随弹簧的初始变形与杆长的比值增大而变宽；隔振系统的准零刚度区域随主弹簧的刚度与机构中的弹簧总刚度的比值以及机构中的弹簧初始变形与杆长的比值增大而变宽；经比较发现，本文推得的被动隔振系统的同一种谐波共振幅频特性与杜芬方程的幅频特性均存在较大偏差.因此，对于这类被动隔振系统的运动微分方程，若以位移激励的幅值与激励频率平方的乘积代替单位质量的激励力幅值按杜芬方程的解来处理谐波共振问题将会带来较大误差.     

立式无筛饲料超微粉碎机的研发及质量检测分析

介绍了我国立式无筛饲料超微粉碎机的发展,简述立式无筛饲料超微粉碎机的组成、工作原理和优越性,分析质量检测及立式无筛饲料超微粉碎机技术的发展,展望制定行业标准的预期效果。     

基于外碾削立式碾米机的离散元法仿真分析

引入离散元仿真技术对碾米机械进行仿真研究,旨在探索碾米机在碾白过程中的碎米机理。通过模拟大米在输送过程来获得速度、运动轨迹等数据,由图表等方式输出模拟结果,可以看到米粒群绕着碾辊做螺旋形前进的运动规律。该技术在粮食机械设计系统的研究中具有重要的推广意义,可为碾米机优化设计提供理论参考,也为其他农业物料精确定量分配提供了一种新的方法。     

DYNAMIC ANALYSIS OF SPINDLE

In this paper, taking a D1201 spindle as an example, we discuss the dynamic analysis of spindle by using the theory of the complex model, we also analyse the factors which effect the dynamic characterics of spindle and give results which arc reference value to improving the structure of spindle,     

A Study of the Vertical Vibration of the 4200 Thick Plate Rolling Mills

In this paper,the mill stand and the rolled piece were studied as a system. Based on the disoreted masses and the deformation of bending curve of the roller and roll housing, according to Rayleigh method,the equivalent mass and and the equivalent stiffness of the mode were solved,and set up a multiple degree of freedom vibration dynamic model. And also did theoretical analysis and calculation with an exapmle of the 4200 thick plate rolling mills.     

A Globally Convergent Algorithm for Nonlinear Programming

A new globally convergent algorithm was presented for a continuous differen-tiable nonlinear programming by defining a measure function deviating from the Kuhn-Tucker point. With this algorithm which can be used to get the optimum solution of the problem,the optimal lagrangian multiplier corresponding the optimal solution of the problem was also obtained. A new iterative algorithm for quadratic programming is obtained when applying the general algorithm to quadratic programming. Finally,a numerical example was given.     

On Determinative Parameters of SDOF Systems in Elasto- plastic Earthquake Response

Parameters dominating elasto- plastic earthquake response of SDOF systems,relation between ground motion amplitude and elasto- plastic response of SDOF systems are presented in this paper.     

直墙拱形巷道围岩应力场分析

为得出直墙拱形巷道围岩应力分布规律,应用复变函数弹性理论推导了直墙拱形巷道围岩应力分布的解析表达式。对直墙拱形巷道边界的围岩应力和巷道水平线方向的围岩应力分布规律进行分析,并考虑直墙拱形巷道断面高宽比和侧压系数对其影响规律。研究表明：在不同巷道断面高宽比、侧压系数下,直墙拱形巷道围岩应力集中区域主要集中在直墙底部底角处、拱形顶板中点附近和底板中部3个位置。不同巷道断面高宽比下,直墙拱形巷道沿水平线的应力分布规律基本相同。侧压系数大于1时,采用巷道断面高宽比小于1较有利于巷道稳定;侧压系数小于等于1时,采用巷道断面高宽比大于1较有利于巷道稳定。     

棉花冠层叶面积的动态模拟

根据试验资料,在系统分析棉花冠层叶面积时空分布规律的基础上,充分考虑叶面积空间垂直分布的异质性,以生育期内累积的每日相对热效应为预报因子,构建了棉花叶面积垂直分布和叶面积指数的动态模拟模型。利用不同年份不同播期的试验资料对模型进行了验证,累积叶面积指数L（z）的模拟结果与1∶1直线之间的R^2和均方根误差分别为0.969和0.257,叶面积指数LAI的模拟结果与1∶1直线之间的R^2和均方根误差分别为0.936和0.305。结果说明模型具有较好的预测性和实用性。模型的模拟结果可作为冠层结构参数,用于冠层辐射传输模型和光合作用模型。