菠萝蜜种子淀粉制备香草兰微胶囊的工艺研究

以菠萝蜜种子淀粉为壁材,采用饱和水溶液法制备香草兰精油微胶囊,以包埋产率为指标,采用响应面分析法对微胶囊的包埋条件进行优化探讨。结果表明:5个单因素中,影响最显著的因素为壁芯材比例、包埋温度和包埋时间。响应面优化得到香草兰精油微胶囊的最佳工艺条件为壁芯材比例为7.5∶1;包埋时间72 min;包埋温度54℃,此条件下的包埋产率为(95.46±0.2)%,包埋率为(76.35±0.6)%,载油量为(27.73±0.3)%。试验证明,此条件结果与模型预测值相吻合,此工艺条件可为菠萝蜜种子淀粉包埋香草兰精油微胶囊工艺提供理论依据。     

An investigation on the effect of heat-moisture treatment on baking quality of wheat by using response surface methodology

Effect of heat-moisture treatment on quality properties of two bread wheats (cvs. Tosunbey and Bayraktar) were investigated by using response surface methodology (RSM). Temperature and moisture conditions in the experimental design were in the range of 55–95 °C and 13–19%. Heat-moisture treated grains were milled into flour and quality properties were determined. The optimum moisture-temperature combination for the highest dry gluten, Zeleny sedimentation, Alveograph W and bread volume values were estimated as 14%-63 °C for Tosunbey and 19%-55 °C for Bayraktar samples. Alveograph W seems to be a good indicator of baking quality for wheats treated at higher temperatures. In order to describe the relationship between the dependent and independent variables (moisture, temperature), the response values were fitted by second order polynomial models. Significance analysis showed that the effect of both moisture and temperature on dry gluten content, sedimentation and falling number values for Tosunbey; falling number and damaged starch values for Bayraktar were significant (p < 0.05). The effect of temperature on Farinograph water absorption, W and P/G, bread volume and firmness values were significant for both cultivars (p < 0.05). It can be concluded that improvement in baking quality can be achieved and flours with different properties can be produced by heat-moisture treatments on wheat.     

橡胶园酸性、中性土壤交换性钙、镁测定方法研究

为了获得简单、易操作、准确度高的橡胶园酸性、中性土壤交换性钙、镁测定方法,本试验通过响应面优化试验,建立称样量、提取液体积、提取方式与交换性钙测定结果之间的数学模型。结果表明：在25℃条件下,以1 mol/L的乙酸铵为土壤浸提液,称样量为2 g、提取液体积175 mL、振荡36 min,为橡胶园酸性、中性土壤的最佳提取条件。将上述条件下得到的结果与标准方法条件下得到的结果相对比,两结果的相对误差在1.25~3.04之间,均属合理范围。利用标准样品对优化方法进行试验验证,结果与推荐值相符。改进后的方法分析成本低、操作简便、测定结果准确、稳定性好,可用于橡胶园酸性、中性土壤交换性钙、镁的测定。     

氮吸附法分析生物质焦孔隙结构

采用氮吸附法对4种生物质焦(稻壳、树叶、玉米秆、棉花秆)的孔隙结构进行测量,结果表明,不同种类焦样的比表面积和孔径分布有明显差别,树叶的比表面积最大,为242.21 m2·g-1,玉米秆的比表面积最小,为0.81 m2·g-1.850℃时,稻壳、树叶、玉米秆焦样的孔径分布曲线在微孔和中孔范围各有一个分布峰,而棉花秆焦样的孔径分布曲线只在中孔范围内出现一个分布峰.热解温度是影响孔隙结构的一个重要因素,在高温条件下,同步热解得到的焦样的比表面积较大,微孔较多.在本研究中,600℃、850℃的稻壳焦样和850℃的树叶焦样具有较大的比表面积,比较适合做吸附剂.     

非平行直纹面的电解磨削

为解决整体叶轮扭曲叶片型面的精加工难题,本文进行了五轴联动数控展成电解磨削的基础研究.在分析平行直纹展成电解磨削整体叶轮扭曲叶片的过切误差、得到过切误差计算公式的基础上,提出用圆锥磨轮和组合式五轴联动数控方案来消除过切误差的方法.文中还介绍了数控展成电解磨床的结构与运动、经济型多轴数控系统及其联动控制方法,并建立了电解磨削非平行直纹展成曲面的数学模型,开发了五轴联动数控展成电解磨削自动数控编程系统,对航空发动机整体叶轮的叶片型面进行电解磨削.结果表明,加工效率比手工修磨、抛光提高了12倍以上.     

Prepenetration stages in infection of clematis by Phoma clematidina

A detailed study of conidial germination, germ-tube growth and the formation of infection structures in Phoma clematidina , the causal agent of clematis wilt, is described for two clematis varieties differing in disease resistance. On both the resistant and susceptible varieties, the fungus entered leaves and stems by direct penetration of the cuticle, often, but not always, following the formation of infection structures. More germ tubes per conidium were formed on the susceptible host, but these germ tubes were on average shorter than on the resistant host. Although germ tubes regularly entered the plant via trichomes, stomata were not found to be sites of entry. Following penetration of the cuticle of resistant plants, germ-tube growth was sometimes restricted to the subcuticular region, and halo formation occurred at the sites where penetration was attempted. Subcuticular growth and halo formation were not observed on susceptible plants. These observations may partly explain the resistance of small-flowered clematis varieties to P. clematidina .     

Isolation of two strains of a new Tombusvirus (Havel river virus, HaRV) from surface waters in Germany

Two virus isolates from water samples — one from a small stream in South Western Germany and another one from the Havel river in North Eastern Germany c. 500 km away, proved to be strains, named S and H, respectively, of a new Tombusvirus for which the name Havel river virus (HaRV) had been suggested previously in a brief account. Immunoelectron microscopical decoration tests and sequence comparisons of the coat proteins indicated that the two HaRV strains are only distantly related to known Tombusviruses. The closest relationships were found to Cucumber necrosis virus. Nothing is known about their natural hosts. Because the S strain of HaRV was isolated in a woody area from a small stream close to its origin, they may be pathogens of trees or wild plants in such habitats.     

响应面法优化链霉菌702产抑真菌物质生料发酵培养基

用响应面分析方法对链霉菌702产抑真菌物质生料发酵培养基进行了研究。实验首先利用部分重复因子试验筛选出链霉菌702发酵产抑真菌物质的关键因素为玉米淀粉和蛋白胨,其次利用最陡爬坡试验逼近最大响应区,最后利用中心组合设计及响应曲面分析确定关键因素的最佳浓度。通过优化得到玉米淀粉和蛋白胨的最适浓度分别为16.83 g/L、8.64 g/L,在优化后的培养基中链霉菌702产抑真菌物质效价达到1 214.52μg/mL,比优化前789.41μg/mL提高了53.85%。     

烟台地区水面蒸发BP神经网络模型研究

运用BP神经网络模型对水面蒸发进行研究,并与多元线性回归和主成分回归2种方法的拟合结果进行比较。结果显示,多元线性回归各参数均通过t检验,拟合较好;主成分回归中,参数b2未通过t检验,拟合效果不如多元线性回归好。BP神经网络模型、多元线性回归、主成分回归建立的水面蒸发量观测值与拟合值的回归方程中决定系数分别为0.8986、0.7993、0.7984。应用BP神经网络进行分析,相对误差小于10%的样本个数超过总样本个数的40%,相对误差不超过30%的样本个数接近80%;而其它2种方法相对误差大于10%的样本个数超过总样本数的80%,相对误差大于50%的接近总样本个数的30%。可见,应用BP神经网络模型进行水面蒸发量计算,远优于其它2种方法,应用此方法进行水面蒸发量的预测是非常理想的。