马尾松叶表微生物多样性

为发掘对林木生长发育有利的优良微生物资源,并筛选适合叶表微生物的收集方法,以马尾松针叶为试验材料,分别用悬摇法和超声波法收集马尾松叶表微生物,用扩增子高通量测序技术、MUSCLE和Qiime软件研究马尾松叶表微生物的多样性。结果表明:扫描电镜观测结果显示,马尾松针叶表面定殖有大量微生物,包括真菌(菌丝及孢子)和细菌。扩增子高通量测序结果表明,马尾松叶表微生物物种丰富,包含细菌运算分类单位(OTUs)490个,真菌OTUs 1273个。马尾松叶表细菌以未分类的蓝细菌属(unidentified_Cyanobacteria)(36.53%)、未分类的拜叶林克氏菌属(unidentified_Beijerinckia)(28.60%)、鞘氨醇单胞菌属(Sphingomonas)(2.35%)为优势属;叶表真菌以枝孢属(Cladosporium)(2.45%)、拟盘多毛孢属(Pestalotiopsis)(0.92%)、无头孢菌属(Capnobotryella)(0.91%)为优势属。针对叶表细菌多样性的研究表明,悬摇法和超声波法均有较高的物种检出度;在叶表真菌多样性的研究中超声波法优于悬摇法,但超声波法样品间数据变异性较大,测定结果不稳定。     

菠萝蜜种子淀粉制备香草兰微胶囊的工艺研究

以菠萝蜜种子淀粉为壁材,采用饱和水溶液法制备香草兰精油微胶囊,以包埋产率为指标,采用响应面分析法对微胶囊的包埋条件进行优化探讨。结果表明:5个单因素中,影响最显著的因素为壁芯材比例、包埋温度和包埋时间。响应面优化得到香草兰精油微胶囊的最佳工艺条件为壁芯材比例为7.5∶1;包埋时间72 min;包埋温度54℃,此条件下的包埋产率为(95.46±0.2)%,包埋率为(76.35±0.6)%,载油量为(27.73±0.3)%。试验证明,此条件结果与模型预测值相吻合,此工艺条件可为菠萝蜜种子淀粉包埋香草兰精油微胶囊工艺提供理论依据。     

Effects of Large Saddle Panels on the Biomechanics of the Equine Back During Rising Trot: Preliminary Results

The saddle panels, directly in contact with the horse's back, are likely an important element to optimize the fitting of the saddle, the comfort of the horse, and subsequently, the pain management in dorsalgic horses. The aim of this study was to better understand the effect of the saddle panels on the horse's back, by evaluating a prototype saddle (comfort panels: CP) compared to a standard saddle (STD). The horse's back movements were measured using inertial measurement units (IMUs) fixed at the levels of thoracic vertebrae T6, T12, T16 (under the saddle) and lumbar vertebrae L2 and L5. The centers of mass (COMs) of the horse and the rider and limb's protraction-retraction angles, pressure between saddle and horse's back, and force on the stirrups were measured using respectively 2D motion capture, pressure mat and force sensors in the stirrup leather. Three horses were trotted at the rising trot (sitting: left diagonal-rider seated; standing: right diagonal-rider standing) by the same rider. To compare saddles, linear mixed-effects regression models were used. The estimated means (SE) were calculated. During sitting phase, pressure in the cranial and middle areas of the saddle significantly increased for CP compared to STD (+0.9 (0.2) kPa and +1.0 (0.1) kPa, respectively) whereas caudal pressure decreased (−1.8 (0.4) kPa). Concurrently, the range of motion of angles T12-T16 and T16-L2 under the saddle significantly increased (+1.8 (0.2)° and +2.3 (0.3)°, respectively). The results showed that modifications of the panels' shape not only affect the pressure distribution but also the kinematics of the thoracic and lumbar regions of the equine back.     

An investigation on the effect of heat-moisture treatment on baking quality of wheat by using response surface methodology

Effect of heat-moisture treatment on quality properties of two bread wheats (cvs. Tosunbey and Bayraktar) were investigated by using response surface methodology (RSM). Temperature and moisture conditions in the experimental design were in the range of 55–95 °C and 13–19%. Heat-moisture treated grains were milled into flour and quality properties were determined. The optimum moisture-temperature combination for the highest dry gluten, Zeleny sedimentation, Alveograph W and bread volume values were estimated as 14%-63 °C for Tosunbey and 19%-55 °C for Bayraktar samples. Alveograph W seems to be a good indicator of baking quality for wheats treated at higher temperatures. In order to describe the relationship between the dependent and independent variables (moisture, temperature), the response values were fitted by second order polynomial models. Significance analysis showed that the effect of both moisture and temperature on dry gluten content, sedimentation and falling number values for Tosunbey; falling number and damaged starch values for Bayraktar were significant (p < 0.05). The effect of temperature on Farinograph water absorption, W and P/G, bread volume and firmness values were significant for both cultivars (p < 0.05). It can be concluded that improvement in baking quality can be achieved and flours with different properties can be produced by heat-moisture treatments on wheat.     

橡胶园酸性、中性土壤交换性钙、镁测定方法研究

为了获得简单、易操作、准确度高的橡胶园酸性、中性土壤交换性钙、镁测定方法,本试验通过响应面优化试验,建立称样量、提取液体积、提取方式与交换性钙测定结果之间的数学模型。结果表明：在25℃条件下,以1 mol/L的乙酸铵为土壤浸提液,称样量为2 g、提取液体积175 mL、振荡36 min,为橡胶园酸性、中性土壤的最佳提取条件。将上述条件下得到的结果与标准方法条件下得到的结果相对比,两结果的相对误差在1.25~3.04之间,均属合理范围。利用标准样品对优化方法进行试验验证,结果与推荐值相符。改进后的方法分析成本低、操作简便、测定结果准确、稳定性好,可用于橡胶园酸性、中性土壤交换性钙、镁的测定。     

群钻钻削精度试验

通过群钻钻头直径Ｄ，进给量ｆ和切削速度ｎ对孔径扩张量，圆度，孔中心线垂直度和直线度影响的试验，得出它们的变化规律。     

基于模糊建模的混炼胶粘度测量

提出了一种在线测量混炼胶粘度的新方法．该方法以模糊建模技术为基础，综合考虑混炼过程各因素对胶料粘度的影响，建立起胶料粘度的在线测量模型．在模糊建模中，采用T-S模型描述胶料粘度变化的非线性过程，提出了一种基于相似性判别的模糊聚类算法以自动确定合适的聚类组数目，并用实数编码的遗传算法优化全局参数，从而获得了规则简化的、具有较高精度的模糊模型．根据此方法，设计了测量装置，并进行了现场试验．试验结果表明模糊模型输出与实验室测量值基本一致，平均误差较低且最大误差未超过1门尼．该方法较大地提高了橡胶混炼的生产效率，为粘度最优控制奠定了基础．     

氮吸附法分析生物质焦孔隙结构

采用氮吸附法对4种生物质焦(稻壳、树叶、玉米秆、棉花秆)的孔隙结构进行测量,结果表明,不同种类焦样的比表面积和孔径分布有明显差别,树叶的比表面积最大,为242.21 m2·g-1,玉米秆的比表面积最小,为0.81 m2·g-1.850℃时,稻壳、树叶、玉米秆焦样的孔径分布曲线在微孔和中孔范围各有一个分布峰,而棉花秆焦样的孔径分布曲线只在中孔范围内出现一个分布峰.热解温度是影响孔隙结构的一个重要因素,在高温条件下,同步热解得到的焦样的比表面积较大,微孔较多.在本研究中,600℃、850℃的稻壳焦样和850℃的树叶焦样具有较大的比表面积,比较适合做吸附剂.     

猪肺炎支原体及其生物学研究进展

猪肺炎支原体是引起猪支气管肺炎的主要病原 ,严重危害着养猪事业的发展。虽然猪肺炎支原体的结构简单 ,但由于它对营养要求较高 ,故培养难度大 ,也是人们不能对其深入研究的一个主要原因。近年来利用克隆技术 ,对猪肺炎支原体从基因水平上进行了多种研究 ,已经取得了一些可喜成果。文章从它的生物学特性、荚膜结构、膜蛋白研究以及基因水平的研究等方面进行了综合性论述 ,并简明地指出了目前研究中存在的问题以及未来展望     

蒸发浓缩－CODcr法测定地面水中低浓度COD

对水样蒸发浓缩法用于地面水中低浓度ＣＯＤ的测定进行探讨的实验结果表明，地面水中低浓度ＣＯＤ物质可以在碱性条件下，通过蒸发浓缩处理后，采用重铬酸钾法进行测定，所得结果的精密度和准确度良好．若选择水样浓缩系数为５，则可将重铬酸钾法的最低检测限浓度降低到１０ｍｇ·Ｌ－１，从而使该方法能够适用于地面水水质标准中各类水质ＣＯＤ的监测要求．