槟榔间作条件下不同修剪方式对可可生长和产量的影响

以槟榔间作可可条件下的可可为研究对象,比较不同修剪方式对其生长、光合作用及产量的影响。结果表明:中度修剪提高可可株高、干周和主枝粗度,重度修剪和仅控冠幅降低可可干周和主枝粗度。中等修剪可可叶片Pn显著高于轻度修剪和仅控冠幅,可能由于修剪提高了新梢叶片叶肉细胞光合作用能力。中度修剪可可徒长枝重量分别比轻度修剪、重度修剪和仅控冠幅显著降低了69.27%、54.69%和57.03%,大大降低了养分消耗,提高产量的同时节省了修剪工作量。综上所述,在槟榔间作可可条件下,采用中度修剪有利于提高光合作用效率,形成健康平衡树形,降低徒长枝养分消耗,提高产量,为槟榔间作可可节本增效技术研究与优化提供依据。     

梨三倍体新品种龙园洋红的选育

龙园洋红梨是梨三倍体新品种,亲本为56-520×乔玛,抗寒性强,短枝型.果实不规则长椭圆形,果形指数1.13,平均单果重185.5 g,每个果实平均2.5粒种子,种子小、不饱满,多畸形.果皮浅黄色,阳面有红晕,果肉乳白色,肉质细软多汁,风味甜,有香气,可溶性固形物16.05%.果实在哈尔滨地区9月中旬成熟.     

装修与电气

本文着重地论述了由装修而引发的电气安全技术问题已到了不容忽视的程度。就此问题作 者提出了自己的观点及解决办法。     

Gas and short‐chain fatty acid production from feeds commonly fed to red deer (Cervus elaphus L.) and incubated with rumen inoculum from red deer and sheep

Efficient red deer supplementary feeding depends on estimations of the nutritive value of offered feeds, frequently estimated with the use of equations derived from domestic ruminants. The aim of this study was to compare the 24‐hour in vitro true dry matter degradability (ivTD₂₄), in vitro gas production (GP) kinetic parameters, GP in 24 hr of incubation (GAS₂₄) and short‐chain fatty acid (SCFA) and microbial biomass (MBS) produced after 24‐hour incubation of feeds in inoculum prepared from sheep and red deer rumen fluid. Eleven feeds, frequently consumed by red deer in Slovenia, which occur either naturally (two fresh grasses, chestnut fruits and common and sessile oak acorns) or are fed as winter supplemental feeds (two grass hays, two grass silages, apple pomace, fresh sugar beetroot), were investigated. The in vitro GP kinetic parameters, GAS₂₄ and ivTD₂₄, did not differ between animal species. Amounts of SCFAs were greater (p < 0.05) when feeds were incubated in sheep inoculum, while molar proportions of acetic and propionic acids did not differ. Molar proportions of butyric acid produced during incubation of high fibre feeds did not differ between animal species, but were higher (p < 0.05) when feeds high in starch or sugar were incubated in red deer inoculum. Greater production of SCFA by sheep rumen microbes suggests better coverage of host animal with energy precursors, while greater production of MBS by red deer rumen microbes suggests better coverage of host animal with protein. Results also suggest that rumens of sheep and red deer are inhabited by different microbial communities, which did not affect the extent of in vitro GP and degradation of feeds used in the present experiment. However, the possibility exists that the divergent nutrient use could be a consequence of different priming by different feeds of the donor animal diets.     

刺槐无性系种子园老龄母树截干矮化试验

利用刺槐萌蘖力强的特性,对刺槐无性系种子园老龄化后的树体进行截干试验,促使其萌蘖形成新的树冠,并进行整形修剪,结果表明:老龄母树截干矮化,效果良好,达到预期目标。解决了原母树树体高大釆种困难的问题,为提高刺槐种子园老龄化后种子产量和质量进行了有益的探索。     

高粱光敏色素A基因的克隆、蛋白结构与长短日照诱导表达模式

光敏色素是一类红光/远红光受体,对植物光形态建成、外部形态和生理功能等方面起着重要的调节作用。为明晰光敏色素A在调控高粱光形态建成发育过程中的作用,本研究比较分析光温敏感程度不同的高粱品种Btx623、Rio、Tx430和LH645的PhyA基因序列和PHYA蛋白的保守结构域,利用qRT-PCR明确长短日照条件处理下PhyA基因的表达模式。结果表明,Btx623、Rio和Tx430之间PhyA基因序列存在非同义突变,LH645在PhyA基因的第7个外显子上插入了5 bp碱基序列;高粱PhyA蛋白中含有1个PAS-2结构域、1个GAF结构域、1个Phytochrome结构域、2个PAS结构域、1个组氨酸激酶A结构域和1个类似组氨酸激酶的ATP激酶结构;遗传进化树分析表明,单子叶和双子叶植物PhyA蛋白明显聚为2大类,高粱PhyA、谷子PhyA和玉米PhyA1、PhyA2聚为一个亚类,相互间亲缘关系较近,与水稻PhyA同源性相对较远;在短日照(SD)条件下各时期PhyA基因转录水平变化显著,Rio PhyA基因转录水平较Btx623和Tx430变化明显,LH645 PhyA基因转录变化不显著,在长日照(LD)条件下Rio PhyA基因转录水平低于Btx623和Tx430,LH645 PhyA基因转录水平变化不显著。以上结果表明,PhyA受光周期诱导,推测其在高粱光形态建成中起重要调控作用。本研究为进一步解析PhyA基因功能及其在调控高粱光形态建成发育过程中的作用提供理论基础。     

紫薇栽培管理技术

指出了紫薇作为城乡绿化的重要树种，适宜于庭院、园路两侧、池畔河边栽植。结合栽培管理实践，系统地总结了紫薇树的育苗、修剪和病虫害防治技术。     

几种修剪树型对'珍珠'番石榴开花坐果及产量的影响

选用4年生'珍珠'番石榴为试脸材料,采用开心形、圆头形、平头形树型结构,以果树生产中采用的自然圆形树型结构为对照,研究4种树型修剪方法对'珍珠'番石榴新梢数、花蕾数、开花结果数及果实产量的影响.试验结果表明,'珍珠'番石榴树型圆头形、开心形促进开花坐果较好,圆头形有利于提高产量.     

Seismic behavior of reinforced-concrete and steel reinforced concrete ultra short columns

进行了4个钢筋混凝土(RC)超短柱、4个型钢混凝土(SRC)超短柱和6个RC分体柱的滞回性能试验研究.8个超短柱的剪跨比为1;6个分体柱的剪跨比为2.4.试验结果表明,RC超短柱的变形能力不满足现行抗震规范要求.不设剪力连接件的SRC超短柱的破坏模式为黏结破坏,与RC超短柱相比,其抗剪承载力和变形能力并无明显提高;设置剪力连接件的SRC超短柱的破坏模式为斜压破坏,其抗剪承载力和变形能力显著提高,但构件的变形能力仍然难以满足现行抗震规范要求.试验结果还表明,在RC超短柱中开缝,形成剪跨比大于2的RC分体柱,可有效提高柱子的延性和变形能力.对于RC分体柱,随轴压比的提高,构件的抗弯承载力提高,但延性和变形能力下降;当设计轴压比大于0.7时,RC分体柱的变形能力不满足现行抗震规范要求.根据试验结果,提出了SRC超短柱的剪力连接件设计方法和RC分体柱的设计建议.