家蚕质型多角体病毒苏州核包涵体小种的纯化

从BmCPV_t内发现和分离出一株新的核包涵体小种,初步命名为家蚕质型多角体病毒—苏州核包涵体小种(Cytoplasmic Polyhedrosis Virus——Suzhou nuclear polyhedra forming strain,简称CPV——Suzhou N strain),家蚕感梁CPV——Suzhou N Strain引起的多角体病,与国内外已知的CPV各变异株不同。本病蚕的多角体只在中肠组织圆筒形细胞核内检出,多角体内有许多病毒粒子,病毒粒子球状,具有核蛋白紫外吸收特征性光谱和较强的感染活性,病毒核酸初步鉴定为dsRNA。     

粮食烘干塔换热器智能折边设备研发

结合螺旋板式换热器的应用领域及其板材折边生产现状,分析了其生产弊端。针对板材折边工艺要求,研发了粮食烘干塔换热器智能折边设备,并剖析其工作机理。根据典型产品结构参数,设计智能折边装备总体装配图并计算主要零件参数,为智能折边装备制作提供理论依据,从而实现换热器板材折边智能加工,提高换热器卷板折边质量及精度。     

刨花计量料仓在刨花板生产中的应用

分别从工艺流程、结构和工作原理以及使用中的注意事项等方面介绍了刨花计量料仓在刨花板生产线中施胶前及铺装前的应用情况。     

Assessment of microbial biocontrol agent (BCA) viability to mechanical and thermal stress by simulating spray application conditions

Background

In order to improve the biological control agent (BCA) efficacy, stress factors threatening the viability of microorganisms during spray application need to be determined. The effect of spray mixture temperature and exposure time on Trichoderma harzianum T 22 and Bacillus amyloliquefaciens QST713 viability were tested. Concurrently the combined effect of mechanical and thermal stress effect on BCA viability were tested at two initial spray mixture temperatures (14 and 25 °C) by simulating a spray application using airblast sprayers featured by different tank capacity and a spray liquid circuit (without and with hydraulic agitation system). To assess the BCA microorganism viability, spray mixture samples were collected at time intervals along trials and plated to count the colony forming units (CFU).

Results

The critical temperature threshold that inhibited BCA viability was 35 °C with 30 min of exposure. The sprayer type, the initial temperature of the spray mixture and the temperature increment during the trials significantly decreased the number of CFU recovered. When simulating a spray application, the spray mixture temperature increase rate was determined mainly by the residual amount of spray mixture in the tank. Even if the tank capacity does not substantially affect the final temperature reached by the spray mixture, the higher residual spray mixture in bigger tanks can expose the BCAs for a longer time to critical temperatures.

Conclusions

Experimental trials allowed us to identify the effect of factors affecting the viability of tested BCAs, providing information about the actual chance to guarantee the biological efficacy of BCA treatments. © 2023 The Authors. Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.     

Work-hardening Mechanism of Non-magnetic High Manganese ZG25Mn18Cr4 Castings

The important character of non-magnetic high manganese ZG25 Mn18Cr4 alloy is rapid work-hardening under external stress. With X-ray diffraction and TEM analysis, it is proved that the microstructures of both undeformed and deformed matrixes are austenite and carbide with some striation structure in the matrixes, the amount of stripes in the deformed matrix is obviously more than that in the undeformed matrix. Electronic diffraction analysis confirmed that the stripes in coarse austenite grains are high density lamination fault sheets. A great deal of lamination fault sheets produced by plastic deformation divides up austenite matrix, shortens the free distance of dislocation movement and results in the rapid work-hardening of ZG25Mn18Cr4 alloy.     

Simulation and Experiment of the Forging Process of Railway Lorry Bomsster

Bomsster is a key load-bearing part of railway lorry bogie.Because of its inherent defects casting-steel bomsster could not meet the demands of the heavy load,acceleration and security for lorry.So forging process is proposed to form it.The forming performance of forging-steel bomsster is analyzed.A forging technology is presented which realizes two forging-steel bomsster parts formed in one die.With the plastic forming simulation software DEFORM-3D,the simulation and optimization of the forming process of forging bomsster has been taken based on 3D rigid visco-plastic FEM theory.Optimized scheme has been used to direct the pilot product.The results of product's testing and application suggest that the new forging technology is feasible and the performance of the product is credibility and stabilization.The factory has realized large scale production of a series of forging-steel bomsster.Remarkable benefits of both economy and society have been achieved.     

硅颗粒对Al-Si合金显微组织的影响

通过在不同温度下向亚共晶AlSi合金熔体中加入固体Al20%Si(质量分数)合金,研究了初生硅颗粒对Al7%Si合金显微组织产生的影响。结果表明:随着处理温度的降低,显微组织从树枝状α相加含针状硅的共晶相,转变成球形α相加含短针状硅的共晶相,最后变成硅颗粒加粗化的球形α相和更少的共晶相。当选择合适的Al20%Si合金组织和处理温度时,采用该工艺可有效地制备半固态成形用坯料。结合初生硅颗粒在亚共晶AlSi合金熔体中的变化过程,对Al7%Si显微组织的演化机理进行了分析。     

西部农村贫困形成机理及治理对策研究

西部农村是我国贫困人口最多、最集中的地区.由于西部的自然环境条件恶劣,影响农业生产的发展,从而导致农村贫困.长期的贫困又使西部农村人口素质普遍较低;加之落后的传统观念,使得人口增长过快,人均资源更少,贫困愈来愈严重.治理西部农村贫困,必须继续从治理环境,提高人口素质入手.     

水耕人为土磁性矿物的生成转化机制研究回顾与展望

随着环境问题的日益突出,人为活动对土壤的影响越来越深刻,需加强对"人为作用"的研究以便解释现代土壤磁性的过程和变化。水耕人为土在发育过程中人为作用的方式多种多样,明确其磁性矿物的生成和转化机制及其影响因素有利于理解人为活动对现代土壤磁性的作用。但目前水耕人为土磁学研究还比较零散,缺乏系统性,已有研究结果有待深入梳理。本文对已有的相关研究报道,包括水耕人为土磁性参数的演变特征、磁性矿物的生成转化机制以及对成土因素的响应等进行综合评述。最后,对当前研究的不足和存在问题进行总结,并对研究方向进行了展望,以期有助于环境磁学的发展。     

秸秆坯块成型工艺参数及保水性试验研究

为探究玉米秸秆、豆粕和聚丙烯酸钠混合制备农用保水剂的生产工艺,以最大压缩力、混料水分、压缩速度、豆粕质量分数和聚丙烯酸钠质量分数为试验因素,以成型坯块的松弛密度为评价指标进行二次回归旋转组合试验,优化工艺参数组合并试验验证,在松弛密度的最优范围内分析其对坯块保水性能的影响。试验结果表明:坯块的松弛密度为460～540 kg/m3的条件下,得出最大压缩力为16～20.59 kN,混料水分为8.84%～12.96%,压缩速度为95.56～155.51 mm/min,豆粕质量分数为16.08%～24.02%,聚丙烯酸钠质量分数为4.91%～7.15%的最佳成型工艺参数;坯块的保水效果随松弛密度的增大而逐渐增强,有砂土时释水量随时间变化符合对数模型,无砂土时则符合线性模型,拟合方程的回归系数均大于0.9,成型坯块保水性的分析可靠,可为复合型农用保水剂的应用提供参考。