插装阀阀芯优化与仿真分析

插装阀在静止状态下，由于静摩擦的原因，导致阀芯与阀套出现卡滞现象；在运动状态下，由于压差和阀芯微偏移的原因造成阀芯与阀套发生磨损；为此提出一种新型的带有导流槽的插装阀阀芯。基于缝隙流动和液压卡紧分析，建立插装阀阀芯与阀套间隙的CFD优化仿真模型，通过N-S方程、伯努利方程和卡紧力方程联立得到阀芯与阀套间卡紧力的推导公式。基于CFD仿真模拟分析，比较新型阀芯与原阀芯不同模型间隙的切线应力、压力分布规律，结果表明：在入口压力为12 MPa时，原阀芯的切线应力在12 000 Pa上下波动，大于新型阀芯切线应力4 200 Pa；在入口压力为8 MPa时，原阀芯的切线应力在7 200 Pa上下波动，大于新型阀芯切线应力3 000 Pa；且原阀芯切线应力的波动范围远大于新型阀芯。新型阀芯在阀套间的受力更加平稳，磨损更小。研究结果为插装阀优化以及减少能量损失和改善润滑条件提供理论指导和依据。     

竹材弦面纵向切削的研究

研究了竹材弦面纵向切削的3种切削方式(单劈刀切削、单刨刀切削及并列式双刨刀切削)及单刨刀切削时的切削阻力,结果表明:对竹材采用劈或刨的切削方式,均可进行弦面纵向切削并能获得质量较好的竹蔑。竹材的节间、节部、切削厚度、含水率及切削速度等因素对切削阻力均有不同程度的影响。节部切削阻力明显高于节间切削阻力;切削阻力随切削厚度的增大而增大,两者成线性关系;含水率增大时,节间切削阻力减小,而节部切削阻力变化不大;切削速度增大时,节间切削阻力基本上是下降的,而节部切削阻力是增大的。     

砂垫层基础的设计与施工措施

在各类工程中砂垫层的作用不同,作者对软弱地基在结构设计中采用砂垫层这一措施进行了详细叙述。     

The use of urban organic wastes in the control of erosion in a semiarid Mediterranean soil

Abstract. A two year field experiment was carried out in a semiarid Mediterranean area in order to evaluate, the effect on soil erosion of adding different urban organic wastes: a stabilized municipal waste (compost), an unstabilized municipal waste, and an aerobic sewage sludge. All the treatments significantly reduced soil erosion, compared to the control soil. The soil amended with compost was the most effective treatment, reducing soil loss by 94% and runoff by 54%.     

An evaluation of the pesera soil erosion model and its application to a case study in Zakynthos, Greece

Abstract. The Pan‐European Soil Erosion Risk Assessment (pesera ) model was evaluated using existing soil erosion data collected under various types of climate, vegetation, landscape and soil conditions. The data used represent a variety of typical Mediterranean land uses such as winter wheat, vines, olives and bare, stony land prevailing in hilly areas. Using this data, the model was calibrated for sediment transport by overland flow and results compared to measured soil erosion values from runoff plots and a watershed on a monthly basis. The performance of the model was assessed statistically, showing that it can be satisfactorily used for predicting soil erosion rates under the conditions included in the study. The overall model estimate including all the available experimental data was 0.69 t ha^?1 yr^?1 with a maximum error of 1.49 t ha^?1 yr^?1. After validation, the model was applied to a small watershed (60 ha) of great ecological importance for the sea turtle Caretta caretta. For this purpose, soil and vegetation maps were compiled from all the necessary data for applying the model. The model was run for three years using daily data from an existing nearby meteorological station. The predicted and measured soil erosion rates for a 7‐month period were 0.31 t and 0.18 t, respectively. Application of the model to each mapping unit showed the over‐riding importance of land use for sediment generation under the given climatic conditions. Bare land, occupying 5.5% of the watershed area, generated up to 69% of the total sediments estimated for the watershed. It is concluded that the pesera model can be used as a regional diagnostic tool under a range of soil, topographic and climatic conditions for identifying the best land use type and vegetation cover to protect hilly areas from soil erosion. The calculated overall root mean square error for the model is 0.06 t ha^?1 yr^?1, compared to a soil erosion rate of 0.04 t ha^?1 yr^?1, which can be tolerated for protecting the area for the sea turtle.     

直列4缸内燃机双轴平衡系统设计

直列4缸平面布置曲轴内燃机存在不平衡的二阶往复惯性力,采用兰氏双轴平衡系统,可以平衡二阶往复惯性力,使内燃机的噪声和振动明显下降。     

土的弹性抗力与墩顶固结结构物的联合计算

将土、基础及上部结构物视为一个整体，在计入土的弹性抗力后对多跨无铰拱和连续刚构的上下部结构进行联合计算，并给出了算例，可供设计参考。     

华北山区草地资源及其生产力的研究

华北山区位于温带——暖温带，东经１０７°～１２３°，北纬３５°～４３°。包括山东丘陵区，太行山区，冀北辽西山地区，阴山山地区四部分。该区属于农牧业交错区，农业、牧业（农区牧业和草地牧业）、林业十分发达，并且在迅速发展。华北山区是我国小麦、玉米和杂粮的主要产区。草地类型多样，饲草料丰富，又是养牛业、养羊业、养猪业相当发达的地区。经统计，华北山区总人口为５６２９万，总土地面积３５４５万ｈａ，天然草地总面积为１５８８．９１万ｈａ，占土地总面积的４４．８２％，人均草地０．２８２３ｈａ。各个区的草地类型不同，生产力差异显著（ｐ＜０．０１）。     

Re-defining tillage erosion: quantifying intensity–direction relationships for complex terrain

Abstract. Current tillage erosion models account for the influence of tillage direction in the magnitude of the soil (tillage) transport coefficient. It is argued here that this is counter-intuitive and causes significant problems in modelling tillage erosion in areas of complex terrain. This article examines whether a re-modelling of tillage erosion is possible that separates tillage direction (an interaction with the landform) from the soil transport coefficient (a measure of tillage intensity representing the combination of implement erosivity and soil erodibility). Experimental data for mouldboard ploughing upslope, downslope and cross-slope at Coombe Barton Farm, Devon are examined. Integration of data for all directions into a single relationship, which relates translocation in the direction of tillage to slope in the direction of tillage and translocation perpendicular to tillage to slope perpendicular to tillage, is not possible using previously published methods of analysis. However, when total translocation distance is regressed against the tangent of the slope at 45° to the tillage direction (bisecting the tillage direction and the direction of overturning) it is found that a single relationship can be used to describe tillage in all three directions. Therefore, this relationship is used to determine a single value of the soil transport coefficient ( k _fTa) for constant soil and implement conditions but different tillage directions. This redefinition of tillage is important both for true estimation of tillage erosion severity, the adirectional coefficient being 40% larger than the directional coefficient, and for modelling of tillage erosion in complex terrain. These improvements are vital when tillage erosion simulation is used to direct soil conservation strategies.     

土壤风蚀研究进展与评述

按照时间顺序，分阶段论述了国内外风蚀研究的概况及成果，系统地总结与评述了国内外土壤风蚀研究的进展，指出把土壤风蚀研究与农田耕作制度的研究结合起来，将是以后研究的重要方向。