竹材弦面纵向切削的研究

研究了竹材弦面纵向切削的3种切削方式(单劈刀切削、单刨刀切削及并列式双刨刀切削)及单刨刀切削时的切削阻力,结果表明:对竹材采用劈或刨的切削方式,均可进行弦面纵向切削并能获得质量较好的竹蔑。竹材的节间、节部、切削厚度、含水率及切削速度等因素对切削阻力均有不同程度的影响。节部切削阻力明显高于节间切削阻力;切削阻力随切削厚度的增大而增大,两者成线性关系;含水率增大时,节间切削阻力减小,而节部切削阻力变化不大;切削速度增大时,节间切削阻力基本上是下降的,而节部切削阻力是增大的。     

Net depth response of a depth-controllable (towed) gillnet for fish sampling

SUMMARY: Flume-tank experiments were performed to examine the depth response of a new type of depth-controlled gillnet. Variations of net depth were investigated as the warp was paid out and wound up for different changes of warp length, main sinker weights, and winch speeds. In most experiments, when the warp finished paying out, the net continued to descend and then ascended slightly to an equilibrium depth (overshoot phenomenon). The overshoot distance was nearly constant when the warp was wound up and increased linearly with increasing winch speed when the warp was paid out. An increase in winch speed reduced net settling time, which converged on a constant value for both paying out and winding up.     

推求合理畦宽的方法及应用

为了寻求合理的节水省时畦宽,以更好地利用现有水源,在1990、1991年试验和实践的基础上,用统计回归分析方法对大城县农田畦田规格进行了分析,求出了合理畦宽,并从灌水持续时间、用电量、提水量等方面对合理畦宽的节水、节能效果进行了分析。     

沙尘暴应急监测方法研究

在沙尘暴应急监测方法研究中,通过对总悬浮颗粒物采样仪器及各种采样参数的研究确定和降尘采样器的研制,制定出沙尘暴应急监测方法。     

Evaluation of sampling methods and assessment of the sample size to estimate the weed seedbank in soil, taking into account spatial variability

As field sampling is time consuming, it is necessary to develop efficient sampling techniques to obtain accurate estimates of the weed seedbank in soil. The relative efficiency between sampling schemes depends on the spatial variability in weed seed density across agricultural fields. Spatial variability of the weed seed density was characterized by theoretical correlograms. A systematic sampling (square grill) scheme was considered and it was found that, taking into account spatial variability, this sampling scheme was more efficient than simple random sampling. As a result, the sample size can be reduced in comparison with that given in previous studies, where spatial correlation was ignored. The reduction depends on the correlation structure defined as a function of the ratio, τ, between the nugget effect and the sill of the variogram. The maximum reduction of the sample size, without loss of either precision or confidence level corresponds to the case where there is no nugget effect, τ = 0. The opposite extreme case, where the reduction is nil, corresponds to the case of a pure nugget effect τ = 1. The abaci based on given expressions are provided to determine the sample size in species whose spatial pattern can be fitted either to a Poisson or to a negative binomial distribution.     

Heritability and genetic correlations between rumination time and production traits in Holstein dairy cows during different lactation phases

So far, rumination has been used as a proxy for monitoring dairy cow health at farm level. However, investigating its genetic aspects as well as its correlation with other important productive traits may turn this management tool into a new informative selection criterion. However, scientific evidences on genetic correlation among rumination time (RT) and milk production and milk composition are still scarce. Therefore, the objective of this study was to estimate the heritability of RT across three lactation phases and its genetic correlation with milk production, milk composition and somatic cell count (SCC). Results of our study showed that heritability for RT was 0.34 and was constant across lactation. The mean genetic correlations between RT and milk production and composition traits were 0.07 (milk production), ?0.07 (protein yield), ?0.31 (fat yield), and ?0.32 (fat/protein ratio). The mean genetic correlation between RT and the SCC was 0.05.     

非对称扰动下热轧铝带跑偏过程三维数值模拟

基于大型工程分析软件MSC.Marc，设计了模拟Fi机架轧制过程的三维有限元模型，结合实验研究得到的1235铝合金高温本构方程，模拟出非对称性扰动下,热轧铝合金板带跑偏状态；研究了板带在来料厚度分布横向非对称、辊缝形状横向非对称及来料不对中扰动下，轧制力、板带运动轨迹等轧制参数的横向非对称性；探讨了板带跑偏与轧制力、压下率等轧制参数的横向分布特征的相关性.研究结果表明：不同扰动下板带的跑偏方向与两侧轧制力差的关系并不一致，不能根据轧制力差判断板带的跑偏方向；压下率差与跑偏方向具有一致性，板带由压下率大的一边向压下率小的一边跑偏，这一规律为无法明确扰动的板带纠偏策略提供了理论参考.     

Design of Automatic Quasi-synchronizing Device in Rural Small Hydropower Station

Generator synchronization is an important and frequent operation in rural small hydropower station. In order to ensure that generator can be paralleled in the grid automatically, efficiently, and stably in the rural small hydropower station whose parallel in operation still needs to be accomplished manually. This paper described an automatic quasi-synchronizing device, based on 89C52 Single-chip Microcomputer （SCM）. Its hardware includes three modules and its software is structuralized. The device structure is simple, and its reliability is high and the maintenance is easy. Besides, convenient Human Machine Interface （HMI） makes the parameter setting simple and flexible     

Micromodel of Computer Emulational Simulation on Twin-roll Casting Strip Solidification Structure

Based on the research on the solidifiation of twin-roll casting strip,the analytical model and emulational model of nucleation,the growth of dendrity tip and colunar dendrity transformation to equiaxis dendrity (CET)of twin-roll casting strip solidification are established by means of the principle of metal solidification and modern computer emulational technology.The foundation for the emulational simulation of twin-roll casting strip solidification structure is laid.     

A MIMD PARALLEL ALGORITHM TO SOLVE TRIDIAGONAL TOEPLITZ LINEAR EQUATIONS

The rank one updating formula and the parallel eliminating algorithm for linear recurrence systems ane combined fo form a MTMD parallel algorithm fo solve tridiagonal Toeplitz Cinear equations. This algorithm has a simple strictire and requires onlty a few storages as well as in-terprocessor communications. There is no special demand on the number of processors in the parallel system. The speedup can come dose to p12 comparing with the LU decomposition method (p is the number of processors). It is worth pointing out that it is proposed algcmthn that considels and organizes the parallel arithmetic in the first order linear ricurrence systems with constant coefficients.