配料混合试验的设计和分析

系统地介绍了配料混合试验的基本概念．指出了混合试验与常规因子试验的区别。提出配料混合试验的3种设计，即顶点和边界点设计、矩心设计和极顶设计。以2个实例演示了混合试验资料的统计方法，包括回归和方差分析．驻点分析和等值线分析。     

基于模糊建模的混炼胶粘度测量

提出了一种在线测量混炼胶粘度的新方法．该方法以模糊建模技术为基础，综合考虑混炼过程各因素对胶料粘度的影响，建立起胶料粘度的在线测量模型．在模糊建模中，采用T-S模型描述胶料粘度变化的非线性过程，提出了一种基于相似性判别的模糊聚类算法以自动确定合适的聚类组数目，并用实数编码的遗传算法优化全局参数，从而获得了规则简化的、具有较高精度的模糊模型．根据此方法，设计了测量装置，并进行了现场试验．试验结果表明模糊模型输出与实验室测量值基本一致，平均误差较低且最大误差未超过1门尼．该方法较大地提高了橡胶混炼的生产效率，为粘度最优控制奠定了基础．     

Physiological Analysis of Yield Variation in Mungbean (Vigna radiata [Roxb.] Wilczek)

Two mungbean varieties, Guj-1 and PIMS-1 differing in their productivity potential, were examined to investigate their photosynthetic system at various stages of growth in relation to yield with two different dates of sowing. Vertical leaves were found to be beneficial. On the other hand, excessive leaf area during the later stages of growth may be detrimental to yield. Lower LAD at seedling stage and overall high NAR values may be reflected in higher grain yield. NAR declined as season progressed and this, in turn, may be related with increase in LAI. The grain yield was considerably more at the first date of sowing as compared to second date of sowing, the effect was being more pronounced in var. PIMS-1 . Various environmental factors recorded at two different dates of sowing and at various stages of growth indicated that these factors may have influenced the yield potential at two different dates of sowing.     

马尖相思人工混交林试验初报

根据在普文试验林场开展的马尖相思与高阿丁枫，马尖相思与西南桦行状混交（面积６．８３ｈｍ￣２）试验，４、５年时的阶段效果，从混交林的林分结构，生长状况，林分的土壤主要理化性状及其年度变化情况方面，论述了两种混交林与纯林的差异，以及不同行状混交方式间的差异。     

植物叶面铺展剂的复配规律Ⅰ.SDS和TX100混合水溶液体相及表面层相互作用行为

2种典型固体表面铺展剂SDS和TX100混合水溶液,无论在其表面层或在混合胶团中两组分之间均存在一定程度的相互作用,使得以廉价的SDS为主的溶液中加入少许TX100组成的复配体系表面活性提高,在植物叶面上的润湿性能改善,并从理论上计算了其相互作用参数,初步解释了实验现象,上述结果不仅对指导优良植物叶面铺展剂配方具有指导意义,也预示了潜在的实用价值.     

充足底墒播后不灌水时肥料和播期组合对小麦生长和耗水的影响

在充足底墒播后不灌水条件下,进行了适当晚播(10月15日播)与超晚播条件下的小麦肥料试验。主要结果为:(1)播后不灌水条件下超晚播减产严重,主要是单位面积总粒数下降太多,通过适当提高穗密度难以补偿;(2)高施磷条件下(施磷二铵450kg/hm2),随施氮量的增加,开花前的耗水量没有增加,而灌浆期的耗水量则随氮肥用量增加而增加;(3)控制花前无效生长,降低花前耗水,优化开花后的群体结构,提高灌浆期的灌浆强度是降低总耗水、提高水分利用效率的基本途径。     

施肥对黔中地区混播草地牧草生长性能的影响

本文研究了氮磷钾不同配比施肥量对黑麦草和紫花苜蓿混播草地牧草生长的影响,结果表明:氮肥促进禾本科牧草叶的生长(P<0.05),增施钾肥对禾草的生长有利;磷能促进豆科牧草根的生长(P<0.05)且豆科牧草株高随着施磷量的增加各处理间差异显著(P<0.05),高氮抑制豆科牧草的生长;最高产量的施肥方式:N:P_2O_5:K_2O为20:30:20,比对照处理的草地产量增加63.92％。     

The effect of sowing date, stale seedbed, row width and mechanical weed control on weeds and yields of organic winter wheat

Three field experiments were carried out in organically grown winter wheat in Denmark. The treatments were sowing time (normal or late sowing) and false seedbed, row width (12 and 24 cm) and weed control method [untreated; mechanical weed control (weed harrowing at 12 cm supplemented with inter‐row hoeing at 24 cm); and herbicide weed control]. Weed biomass in midsummer was greatest on plots sown at the normal sowing time (compared with delayed sowing) and was reduced by mechanical or chemical weed control (compared with untreated plots). Row width alone had no influence on weed biomass, but in the experiment with high weed pressure, the more intensive mechanical weed control used at a row width of 24 cm reduced weed biomass. Normal sowing time tended to give higher yields, but this was only statistically significant in one of the three experiments. Wide rows gave a yield decrease in the experiment with low weed pressure. The effect of weed control on yield was dependent on the weed pressure. At low weed pressure, mechanical weed control caused a yield decrease compared with untreated or herbicide treated. At intermediate weed levels there were no differences, whereas at high weed pressure, mechanical weed control and herbicide treatment caused a yield increase compared with untreated. False seedbeds were shown to contribute to a decrease in the soil seed reserve.