不同阶段猪用颗粒饲料物理性能的对比分析

对某饲料厂不同阶段猪用4种颗粒饲料的物理性能包括直径、长度、硬度、容重、含粉率和耐久性指数（Pellet Durability Index, PDI）等进行测定,对结果进行归类总结并采用统计学的方法参照有关标准进行分析。结果表明,4种颗粒饲料直径在2.87~3.94 mm之间,母猪料直径最大,小猪料最小,两两之间差异显著（P<0.05）,而且随着猪只年龄的增加,颗粒饲料的直径呈递增趋势。颗粒长度在8.62~11.94 mm之间,以大猪料最长,小猪料最短,长径比偏高。颗粒硬度在3.86~6.47 kg之间,以大猪料最大,小猪料最小,中小猪料显著低于大猪料和母猪料（P<0.05）,只有小猪料符合有关要求。颗粒容重在576.7~614.6 g/L之间,母猪料最大,小猪料最小,两两之间差异显著（P<0.05）,与直径呈相同的增减趋势。含粉率以小猪料最大,且只有小猪料与大猪料之间差异显著（P<0.05）。颗粒PDI以大猪料最大,小猪料最小,各阶段猪料的含粉率和PDI均符合有关要求。建议饲料厂家注重颗粒饲料物理性能指标的控制,调整饲料配方和工艺参数,不断改进颗粒饲料的质量。     

Compatibility of root growth and tuber production of potato cultivars with dynamic and static water‐saving irrigation managements

The important root characteristics of root length density (RLD) and root mass density (RMD) generally differ among irrigation managements and potato cultivars. The objective of this study was to investigate the RLD and RMD variations and their functional relationships with gross potato tuber yield for two commercial potato cultivars, Agria and Sante, under different irrigation strategies. Full irrigation and water‐saving irrigation strategies, deficit and partial root drying irrigations, were applied statically (S) and dynamically (D) based on daily crop evapotranspiration. Results showed that SPRD had significantly greater RLD (3.64 cm/cm³) and RMD (132.7 μg/cm³) than other irrigation treatments. Between the potato cultivars, Agria had significantly larger values of RLD (3.50 cm/cm³) and RMD (138.7 μg/cm³) than Sante. The functional relationship between the root growth characteristics and tuber yield showed that under water‐saving irrigations, Agria increased root mass at the expense of gross tuber yield but Sante increased root mass to maintain larger gross tuber yields. However, Agria produced more roots and gross tuber yield than Sante, and it is concluded that Agria is a more drought‐tolerant potato cultivar, which is recommended for tuber production in regions where water might be scarce. It was shown that larger root production in potatoes was associated with improved tolerance to water stress.     

Establishing an eyeball-weight relationship for Litopenaeus vannamei using machine vision technology

This study aimed to establish a shrimp eyeball-weight relationship model for Litopenaeus vannamei using machine vision technology. A total of 295 shrimp were sampled from a recirculating aquaculture system (RAS). The long-axis length (d), body length (L), and body weight (W) of each individual was measured. The long axis length of the shrimp eyeball was identified and measured using machine vision technology. Continuous fitting and piecewise fitting models were used to construct the eyeball-weight relationship model for L. vannamei. The continuous fitting relationship model was described as: W = 38.865d^2.7914, while the piecewise model was described as: d < 2 mm, W = 0.0326d^3.7363, R² = 0.9288; 2 mm ≤ d < 3.9 mm, W = 0.0401d^3.104, R² = 0.9629; 3.9 mm ≤ d < 5.8 mm, W = 0.0421d^3.0311, R² = 0.9216; 5.8 mm < d, W = 0.103d^2.6226, R² = 0.9457. The root mean square error (RMSE) of the piecewise fitting model (0.0244, 0.1575, 0.5034, 0.7072) was smaller than the continuous fitting model (0.8229). The correlation coefficient (R²) of the piecewise model (0.9288, 0.9629, 0.9216, and 0.9457) was similar to that of the continuous fitting model (R² = 0.9621). The results indicated that the piecewise fitting model is suitable for calculating the biomass of L. vannamei in RAS and provides a novel way of estimating the biomass of L. vannamei cultured in RAS. The piecewise fitting model can also provide the foundation of evaluating the production of shrimp using underwater image recognition in intelligent aquaculture systems.     

同源四倍体及其原二倍体黑皮冬瓜光合光响应模型筛选

为了筛选出最适合黑皮冬瓜Benincasa hispida (Thunb.) Cogn.的光合光响应模型,为其育种提供理论依据,以同源四倍体及其原二倍体黑皮冬瓜为试验材料,对8种经典的光合光响应模型适用性进行了比较分析。结果表明：二次多项式能够表现出光抑制情况,但在拟合过程中出现暗呼吸速率为正值、光补偿点为负值及无法解释当光强达到饱和后光合速率快速下降的问题;直角双曲线、非直角双曲线及指数函数Ⅰ、指数函数Ⅱ无法直接求取光饱和点、光补偿点,结合常用的光饱和点的计算方法得到的光饱和点与实测值均存在较大的偏差,且指数函数Ⅱ在计算光饱和点时表现出明显的人为性,也无法拟合光抑制情况,但4种模型拟合得到的光补偿点均与实测值相差不大;指数修正模型因系数β为负值,无法求取四倍体黑皮冬瓜材料的光饱和点和最大净光合速率,且拟合得到的四倍体黑皮冬瓜的光补偿点明显低于实测值;直角双曲线修正模型计算得到的暗呼吸速率及二倍体黑皮冬瓜的光饱和点明显低于实测值,但获得的四倍体及其二倍体的最大净光合速率与实测值最接近,说明其在拟合最大净光合速率上有优势;整体上分段函数计算得到的黑皮冬瓜的各光合参数与实测值最为接近,与实测值的平均相对误差最小,也能很好的拟合发生光抑制部分的光响应曲线。分段函数拟合同源四倍体及其原二倍体黑皮冬瓜光合光响应曲线效果较其他模型效果好,分段函数模型为黑皮冬瓜最适合的光合光响应模型。     

中国高粱光温类型的初步研究

1、在短光照或温室条件件下高粱品种出苗～抽穗期日数显著缩短,供试品种平均比对照分别缩短12.5天和13.635天,缩短百分率分别为18.8和20.5;伴随苗穗期日数的缩短,叶片数在短光或温室条件下分别减少3.9和4.275片,减少百分数分别为22.24和24.22;株高分别降低60.15和47.65厘米,降低百分数为25.88和20.5,表明光、温直接影响高粱的生育进程和器官建成的数量与结构。 2、高粱品种生育日数变化主要反映在出苗～抽穗期。出苗～抽穗日数在短光或温室条件下分别减少18.8％和20.5％.而抽穗～成熟日数仅减少5.1％和8.3％,表明高粱出苗～抽穗期是光温反应的最大效应期。 3、不同品种在短光或温室条件下性状变化的趋势一致,但程度明显不同;同一品种同一性状在上述条件下变化程度也不同。根据供试品种对光温敏感的程度划为四大类群,其数量与地理分布如下: Ⅰ、光温敏感型,占试验品种总数的20％.分布在长江以北,辽宁以南地区。Ⅱ、温敏感型,包括温敏感光中度敏感型和温敏感光迟钝型,占25%,分布在黄河以北,北纬45℃以南的山西、内蒙、辽宁、河北北部和吉林南部。Ⅲ、光敏感型、包括光敏感沮中度敏感型和光敏感温迟钝型,占12.5％,分布在黄河(北纬35°)以南,南岭(北纬25°)以北地区。Ⅳ、中度敏感型占42.5％,分布广且没有明显的地带性。试验未发现对光、温都迟钝的类型。北方温敏感型品种较多,短日性较弱,南方光敏感型品种较多,短日性强、感温性中等或较弱。不同光温类型的形成、分布与其所处的生态环境即光温条件和栽培制度密切相关。 4、温敏感型和光敏感型中早熟品种较多,占86％,光温敏感型品种既有早熟的,中熟的、也有晚熟的,所以光温敏感的品种不一定全是早熟品种,而晚熟品种也并非对光温反应不敏感。中度敏感型品种也有早熟、中熟和晚熟之分。在不同光温条件和栽培制度下,不同光温类型熟性变化的主导因素不同。 5、光、温在形成高粱不同类型过程中的效应是相互联系而又有区别的,光、温效应对不同环境下的不同类型有主次之分,大小之别;光、温效应在高粱不同发育阶段既是同步性的,又是顺序性的。     

应用极大似然法分析小麦穗长的遗传

采用质量—数量性状遗传的极大似然分析方法,对长穗小麦品系93(220)的主茎穗长进行了质量—数量遗传模型测验和主、微基因效应与变异估计。结果表明:长穗小麦新品系93(220)的主茎穗长为一典型的质量—数量性状,由一个主基因和若干微基因共同控制;一对隐性主基因控制穗长,附合加性——显性遗传模型,F1代表现为部分显性,隐性主基因增加主茎穗长的效应平均为1.47,微基因遗传效应为2.83cm,隐性主基因个体主茎穗长表现为长穗。     

分泌抗鸡Ig单抗杂交瘤细胞系的建立与单抗生物学特性的鉴定

从传染性法氏囊病病毒（ＩＢＤＶ）单克隆抗体（ＭｃＡｂ）杂交瘤细胞系１Ｄ１０、１Ｇ１中得到了３株能稳定分泌抗鸡免疫球蛋白（Ｉｇ）ＭｃＡｂ的杂交瘤细胞系１Ｂ７、１Ｄ７、３Ｇ６。其抗体类和亚类均属ＩｇＧ２ｂ，腹水的ＥＬＩＳＡ效价≥１∶２５６００，琼扩效价为１∶８～１∶１６。３株ＭｃＡｂ能与鸡血清中的Ｉｇ出现沉淀反应，琼扩在２４ｈ以内出现清晰的沉淀线，而不能和鸭、鸽、鹌鹑等禽类及异种动物血清出现沉淀线。纯化的鸡ＩｇＧ、ＩｇＭ经ＳＤＳ－ＰＡＧＥ后，分别用纯化并经辣根过氧化物酶（ＨＰＲ）标记的１Ｂ７、１Ｄ７、３Ｇ６单抗酶结合物进行免疫印迹试验证明，３株单抗识别的均为ＩｇＧ、ＩｇＭ分子的轻链     

Influence of Low Light Irradiance on Grain Filling in Rice (Oryza saliva L.) cultivars

Time course of grain filling pattern in two rice (Oryza sativa L.) cultivars, grown under normal and low light intensities, was studied. The number of spikelets, partially filled grains and high density grains were monitored at a 5 day interval during grain filling period from uniform panicles tagged at anthesis. The low light tolerant cultivar Swarnaprabha had more high density grains and less partially filled grains throughout the grain filling period and at harvest compared to cultivar Ratna under both normal and low light intensities. Further, the opening of spikelets in two flushes in Swarnaprabha seemed to result in a more efficient resource allocation and hence better yield as compared to Ratna, in which the opening of spikelets was in a single flush on day 10.     

轻型木结构建筑覆板的集中静载性能

介绍轻型木结构建筑覆板集中静载结构性能试验的装置、条件和方法,并进行国产人工林落叶松胶合板作轻型木结构覆板的集中静载性能研究.结果表明:与国外胶合板覆板具有相同厚度的国产落叶松屋面板和楼面板,其集中载荷性能均优于相关标准的要求.     

Influence of death struggle on the structural changes in chub mackerel muscle during chilled storage

ABSTRACT: Chub mackerel (34–35 cm, approximately 500 g), which were caught by fishing with a rod and line at the Bungo Channel, Oita prefecture, were rested overnight in a fish preserve and either killed by decapitation (control group) or allowed to struggle in air for 30 min (struggled group). Muscle samples were excised every 4 h, and measurements on breaking strength and histological observations were done for both groups. The breaking strength of muscle in the control group was significantly higher than that in the struggled group, whereby a decrease in breaking strength was delayed for 12 h compared to the struggled group. Light microscopy showed space extension among muscle cells in association with a decrease in breaking strength. Especially in the struggled group, the extended area was larger and the difference in area was significant at the time when breaking strength showed a significant difference. Using electron microscopy, the extended area showed cut and/or disappeared collagen fibrils. From these results, it was demonstrated that struggling to death promoted the degradation of collagen fibrils and the weakening of connective tissue and, resultantly, led to the faster softening of muscle of chub mackerel.